Mechanical properties of WC coatings evaluated using instrumented indentation technique

References

• Hazra S, Sabiruddin K and Bandyopadhyay PP: ‘Plasma and HVOF sprayed WC–Co coatings as hard chrome replacement solution’, Surf. Eng., 2012, 28, (1), 37–43.
   Web of Science ®Google Scholar
• Khan TI, Saha G and Glenesk LB: ‘Nanostructured composite coatings for oil sand’s applications’, Surf. Eng., 2010, 26, (7), 540–546.
   Web of Science ®Google Scholar
• Ortiz-Mancilla MJ, Mariño-Berroterán C, Berríos-Ortiz JA, Mesmacque G and Puchi-Cabrera ES: ‘Effect of a thin hard chromium coating on fatigue behaviour of 4140 steel’, Surf. Eng., 2004, 20, (5), 345–352.
   Web of Science ®Google Scholar
• Puchi-Cabrera ES, Maccio R and Staia MH: ‘Fatigue behaviour of 7075-T6 aluminium alloy coated with WC–12Co alloy deposited by plasma spray’, Surf. Eng., 2006, 22, (4), 253–262.
   Web of Science ®Google Scholar
• Puchi-Cabrera ES, Staia MH, Santana YY, Mora-Zorrilla EJ, Lesage J, Chicot D, La Barbera-Sosa JG, Ochoa-Pérez E and Villalobos-Gutiérrez CJ: ‘Fatigue behavior of AA7075-T6 aluminum alloy coated with a WC–10Co–4Cr cermet by HVOF thermal spray’, Surf. Coat. Technol., 2013, 220, 122–130.
   Web of Science ®Google Scholar
• Villalobos-Gutiérrez CJ, Gedler-Chacón GE, La Barbera-Sosa JG, Piñeiro A, Staia MH, Lesage J, Chicot D, Mesmacque G and Puchi-Cabrera ES: ‘Fatigue and corrosion fatigue behavior of an AA6063-T6 aluminum alloy coated with a WC–10Co–4Cr alloy deposited by HVOF thermal spraying’, Surf. Coat. Technol., 2008, 202, 4572–4577.
   Web of Science ®Google Scholar
• Santana YY, La Barbera-Sosa JG, Bencomo A, Lesage J, Chicot D, Bemporad E, Puchi-Cabrera ES and Staia MH: ‘Influence of mechanical properties of tungsten carbide-cobalt thermal spray coatings on their solid particle erosion behaviour’, Surf. Eng., 2012, 28, (4), 237–243.
   Web of Science ®Google Scholar
• Tillmann W, Selvadurai U and Luo W: ‘Measurement of the Young’s modulus of thermal spray coatings by means of several methods’, J. Therm. Spray Technol., 2013, 22, (2–3), 290–298.
   Web of Science ®Google Scholar
• Tillmann W, Nebel J and Piotrowski W: ‘Influence of fine powder feedstock (−10 +2 μm) on the HVOF spraying characteristics, coating morphology, and properties of WC–CoCr 86–10–4’, J. Therm. Spray Technol., 2013, 22, (2–3), 242–249.
   Web of Science ®Google Scholar
• La Barbera-Sosa JG, Santana YY, Villalobos-Gutiérrez C, Chicot D, Lesage J, Decoopman X, Iost A, Staia MH and Puchi-Cabrera ES: ‘Fatigue behavior of a structural steel coated with a WC–10Co–4Cr/Colmonoy 88 deposit by HVOF thermal spraying’, Surf. Coat. Technol., 2013, 220, 248–256.
   Web of Science ®Google Scholar
• Santana YY, Renault PO, Sebastiani M, La Barbera JG, Lesage J, Bemporad E, Le Bourhis E, Puchi-Cabrera ES and Staia MH: ‘Characterization and residual stresses of WC–Co thermally sprayed coatings’, Surf. Coat. Technol., 2008, 202, 4560–4565.
   Web of Science ®Google Scholar
• Santana YY, La Barbera-Sosa JG, Caro J, Puchi-Cabrera ES and Staia MH: ‘Mechanical properties and microstructure of WC–10Co–4Cr and WC–12Co thermal spray coatings deposited by HVOF’, Surf. Eng., 2008, 24, (5), 374–382.
   Web of Science ®Google Scholar
• Houdková Š, Bláhová O, Zahálka F and Kašparová M: ‘The instrumented indentation study of HVOF-sprayed hardmetal coatings’, J. Therm. Spray Technol., 2012, 21, (1), 77–85.
   Web of Science ®Google Scholar
• Nohava J, Haušild P, Houdková Š and Enžl R: ‘Comparison of isolated indentation and grid indentation methods for HVOF sprayed cermets’, J. Therm. Spray Technol., 2012, 21, (3–4), 651–658.
   Web of Science ®Google Scholar
• Chivavibul P, Watanabe M, Kuroda S and Shinoda K: ‘Effects of carbide size and Co content on the microstructure and mechanical properties of HVOF-sprayed WC–Co coatings’, Surf. Coat. Technol., 2007, 202, 509–521.
   Web of Science ®Google Scholar
• La Barbera-Sosa JG, Santana YY, Moreno E, Cuadrado N, Caro J, Renault PO, Le Bourhis E, Staia MH and Puchi-Cabrera ES: ‘Effect of spraying distance on the microstructure and mechanical properties of a Colmonoy 88 alloy deposited by HVOF thermal spraying’, Surf. Coat. Technol., 2010, 205, (4), 1799–1806.
   Web of Science ®Google Scholar
• Zeng K and Chiu C.-H: ‘An analysis of load–penetration curves from instrumented indentation’, Acta Mater., 2001, 49, 3539–3551.
   Web of Science ®Google Scholar
• Underwood EE: ‘Quantitative metallography, metalography and microstructures’, 9th edn; 1992, Metals Park, OH, ASM International.
   Google Scholar
• Luyckx S and Love A: ‘The dependence of the contiguity of WC on Co content and its dependence from WC grain size in WC–Co alloys’, Int. J. Refract. Met. Hard Mater., 2006, 24, 75–79.
   Web of Science ®Google Scholar
• Oliver WC and Pharr GM: ‘Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology’, J. Mater. Res., 2004, 19, (1), 3–20.
   Web of Science ®Google Scholar
• Doerner MF and Nix WD: ‘A method for interpreting the data from depth-sensing indentation instruments’, J. Mater. Res., 1986, 1, (4), 601–609.
   Web of Science ®Google Scholar
• Hay JC, Bolshakov A and Pharr GM: ‘A critical examination of the fundamental relations used in the analysis of nanoindentation data’, J. Mater. Res., 1999, 14, (6), 2296–2305.
   Web of Science ®Google Scholar
• Toparli M, Sen F, Culha O and Celik E: ‘Thermal stress analysis of HVOF sprayed WC–Co/NiAl multilayer coatings on stainless steel substrate using finite element methods’, J. Mater. Process. Technol., 2007, 190, 26–32.
   Web of Science ®Google Scholar
• Li H and Bradt RC: ‘The micro-hardness indentation load/size effect in rutile and cassiterite single crystals’, J. Mater. Res., 1993, 28, 917–926.
   Google Scholar
• Thomas A: ‘Microhardness measurement as a quality control technique for thin, hard coatings’, Surf. Eng., 1987, 3, (2), 117–122.
   Google Scholar
• Puchi-Cabrera ES: ‘Computation of composite hardness of coated systems’, Surf. Eng., 2004, 20, (5), 332–344.
   Web of Science ®Google Scholar
• Hertz H: J. Reine Angew. Math., 1881, 92, 156–171.
   Google Scholar
• Antunes JM, Menezes LF and Fernandes JV: ‘Three-dimensional numerical simulation of Vickers indentation tests’, Int. J. Solids Struct., 2006, 43, (3–4), 784–806.
   Web of Science ®Google Scholar
• Joslin DL and Oliver WC: ‘A new method for analyzing data from continuous depth-sensing microindentation tests’, J. Mater. Res., 1990, 5, 123–126.
   Web of Science ®Google Scholar
• Lee JS, Jang JI, Lee BW, Choi Y, Lee SG and Kwon D: ‘An instrumented indentation technique for estimating fracture toughness of ductile materials: A critical indentation energy model based on continuum damage mechanics’, Acta Mater., 2006, 54, 1101–1119.
   Web of Science ®Google Scholar
• Lee JS, Kim KH, Kim DS and Kwon D: ‘Evaluation of fracture toughness using indentation method based on continuum damage mechanics’, Proc. 16th Int. Offshore and Polar Eng. Conf., San Francisco, CA, USA, May–June 2006, International Society of Offshore and Polar Engineers (ISOPE), Vol. IV, 81–85.
   Google Scholar
• La Barbera-Sosa JG, Santana-Méndez YY, Staia MH, Chicot D, Lesage J, Caro J, Mesmacque G and Puchi-Cabrera ES: ‘Microstructural and mechanical characterization of Ni-base thermal spray coatings deposited by HVOF’, Surf. Coat. Technol., 2008, 202, 4552–4559.
   Web of Science ®Google Scholar
• Culha O, Toparli M, Celik E, Aksoy T and Soykan HS: ‘Indentation size effect on mechanical properties of HVOF sprayed WC based cermet coatings for a roller cylinder’, Surf. Coat. Technol., 2009, 203, (14), 2052–2057.
   Web of Science ®Google Scholar
• Bandyopadhyay PP, Chicot D, Venkateshwarlu B, Racherla V, Decoopman X and Lesage J: ‘Mechanical properties of conventional and nanostructured plasma sprayed alumina coatings’, Mech. Mater., 2012, 53, 61–71.
   Web of Science ®Google Scholar
• Walley SM: ‘Historical origins of indentation hardness testing’, Mater. Sci. Technol., 2012, 28, 1028–1044.
   Web of Science ®Google Scholar
• Cheng YT and Cheng CM: ‘Scaling, dimensional analysis, and indentation measurements’. Mater. Sci. Eng. R, 2004, R44, 91–149.
   Web of Science ®Google Scholar
• Gong J and Guan Z: ‘Load dependence of low-load Knoop hardness in ceramics: a modified PSR model’, Mater. Lett., 2001, 47, (3), 140–144.
   Web of Science ®Google Scholar
• Chicot D, Puchi-Cabrera ES, Iost A, Staia MH, Decoopman X, Roudet F and Louis G: ‘Analysis of indentation size effect in copper and its alloys’, Mater. Sci. Technol., 2013, 29, (7), 868–876.
   Web of Science ®Google Scholar
• Sangwal K, Surowska B and Błaziak P: ‘Analysis of the indentation size effect in the microhardness measurement of some cobalt-based alloys’, Mater. Chem. Phys., 2002, 77, 511–520.
   Web of Science ®Google Scholar
• Santana-Méndez YY: ‘A study on the mechanical and tribological properties of WC base materials’, PhD thesis, School of Metallurgical Engineering and Materials Science, Faculty of Engineering, Universidad Central de Venezuela/Université des Science et Technologies de Lille, Caracas, Venezuela/Lille, France, 2008.
   Google Scholar
• La Barbera Sosa JG, Santana Méndez YY, Staia MH and Puchi Cabrera ES: ‘Comportamiento a la fatiga-corrosión del acero SAE 1045 recubierto con una aleación base níquel proyectada térmicamente por HVOF’, Acta Microsc., 2009, 18, (1), 39–51.
   Google Scholar
• Tabor D: ‘The hardness of metals’; 1951, Oxford, Clarendon Press.
   Google Scholar