Modelling of impact behaviour of cold spray particles: review

References

• Alkhimov A. P., Kosarev V. F. and Papyrin A. N.: ‘A method of cold gas dynamic deposition’, Dold. Akad. Nauk. SSSR, 1990, 315, (5), 1062–1065.
   Google Scholar
• Papyrin A.: ‘Cold spray technology’, Adv. Mater. Process, 2001, 159, (9), 49–51.
   Web of Science ®Google Scholar
• Papyrin A., Kosarev V., Klinkov S., Alkimov A. and Fomin V.: ‘Cold spray technology’; 2006, Amsterdam, Elsevier Science.
   Google Scholar
• Stoltenhoff T., Borchers C., Gartner F. and Kreye H.: ‘Microstructures and key properties of cold-sprayed and thermally sprayed copper coatings’, Surf. Coat. Technol., 2006, 200, (16–17), 4947–4960.
   Web of Science ®Google Scholar
• Li C. J. and Li W. Y.: ‘Deposition characteristics of titanium coating in cold spraying’, Surf. Coat. Technol., 2003, 167, (2–3), 278–283.
   Web of Science ®Google Scholar
• Wu X. K., Zhou X. L., Cui H., Zheng X. and Zhang J. S.: ‘Deposition behavior and characteristics of cold-sprayed Cu–Cr composite deposits’, J. Therm. Spray Technol., 2012, 21, (5), 792–799.
   Web of Science ®Google Scholar
• Spencer K., Fabijanic D. M. and Zhang M. X.: ‘The use of Al–Al2O3 cold spray coatings to improve the surface properties of magnesium alloys’, Surf. Coat. Technol., 2009, 204, (3), 336–344.
   Web of Science ®Google Scholar
• Klinkov S. V., Kosarev V. F., Sova A. A. and Smurov I.: ‘Calculation of particle parameters for cold spraying of metal–ceramic mixtures’, J. Therm. Spray Technol., 2009, 18, (5–6), 944–956.
   Web of Science ®Google Scholar
• Bu H. Y., Yandouzi M., Lu C., MacDonald D. and Jodoin B.: ‘Cold spray blended Al+Mg17Al12 coating for corrosion protection of AZ91D magnesium alloy’, Surf. Coat. Technol., 2012, 207, 155–162.
   Web of Science ®Google Scholar
• Dosta S., Couto M. and Guilemany J. M.: ‘Cold spray deposition of a WC–25Co cermet onto Al7075-T6 and carbon steel substrates’, Acta Mater., 2013, 61, (2), 643–652.
   Web of Science ®Google Scholar
• Cho S., Takagi K., Kwon H., Seo D., Ogawa K., Kikuchi K. and Kawasaki A.: ‘Multi-walled carbon nanotube-reinforced copper nanocomposite coating fabricated by low-pressure cold spray process’, Surf. Coat. Technol., 2012, 206, (16), 3488–3494.
   Web of Science ®Google Scholar
• Lee H. and Ko K.: ‘Effect of SiC particle size on cold sprayed Al–SiC composite coatings’, Surf. Eng., 2009, 25, (8), 606–611.
   Web of Science ®Google Scholar
• Villafuerte J.: ‘Recent trends in cold spray technology: looking at the future’, Surf. Eng., 2010, 26, (6), 393–394.
   Web of Science ®Google Scholar
• Assadi H., Gartner F., Stoltenhoff T. and Kreye H.: ‘Bonding mechanism in cold gas spraying’, Acta Mater., 2003, 51, (15), 4379–4394.
   Web of Science ®Google Scholar
• Grujicic M., Saylor J. R., Beasley D. E., DeRosset W. S. and Helfritch D.: ‘Computational analysis of the interfacial bonding between feed-powder particles and the substrate in the cold-gas dynamic-spray process’, Appl. Surf. Sci., 2003, 219, (3–4), 211–227.
   Web of Science ®Google Scholar
• Bae G., Kumar S., Yoon S., Kang K., Na H., Kim H. J. and Lee C. H.: ‘Bonding features and associated mechanisms in kinetic sprayed titanium coatings’, Acta Mater., 2009, 57, (19), 5654–5666.
   Web of Science ®Google Scholar
• King P. C., Bae G., Zahiri S. H., Jahedi M. and Lee C.: ‘An experimental and finite element study of cold spray copper impact onto two aluminum substrates’, J. Therm. Spray Technol., 2009, 19, (3), 620–634.
   Web of Science ®Google Scholar
• Grujicic M., Zhao C. L., DeRosset W. S. and Helfritch D.: ‘Adiabatic shear instability based mechanism for particles/substrate bonding in the cold-gas dynamic-spray process’, Mater. Des., 2004, 25, (8), 681–688.
   Web of Science ®Google Scholar
• Li W. Y. and Gao W.: ‘Some aspects on 3D numerical modeling of high velocity impact of particles in cold spraying by explicit finite element analysis’, Appl. Surf. Sci., 2009, 55, (18), 7878–7892.
   Google Scholar
• Dykhuizen R. C., Smith M. F., Gilmore D. L., Neiser R. A., Jiang X. and Sampath S.: ‘Impact of high velocity cold spray particles’, J. Therm. Spray Technol., 1999, 8, (4), 559–564.
   Web of Science ®Google Scholar
• Bae G., Xiong Y., Kumar S., Kang K. and Lee C.: ‘General aspects of interface bonding in kinetic sprayed coatings’, Acta Mater., 2008, 56, (17), 4858–4868.
   Web of Science ®Google Scholar
• Kim K. H., Watanabe M. and Kuroda S.: ‘Bonding mechanisms of thermally softened metallic powder particles and substrates impacted at high velocity’, Surf. Coat. Technol., 2010, 204, (14), 2175–2180.
   Web of Science ®Google Scholar
• Yin S., Wang X. F., Suo X. K., Liao H. L., Guo Z. W., Li W. Y. and Coddet C.: ‘Deposition behavior of thermally softened copper particles in cold spraying’, Acta. Mater., 2013, 61, (14), 5105–5118.
   Web of Science ®Google Scholar
• Li W. Y., Liao H. L., Li C. J., Li G., Coddet C. and Wang X. F.: ‘On high velocity impact of micro-sized metallic particles in cold spraying’, Appl. Surf. Sci., 2006, 253, (5), 2852–2862.
   Web of Science ®Google Scholar
• Li W. Y., Zhang C., Li C. J. and Liao H. L.: ‘Modelling aspects of high velocity impact of particles in cold spraying by explicit finite element analysis’, J. Therm. Spray Technol., 2009, 18, (5–6), 921–933.
   Web of Science ®Google Scholar
• Li W. Y., Yu M., Wu H. and Liao H. L.: ‘Effect of mesh resolution on the particle deformation during cold spraying by Eulerian formulation’, Rare. Met. Mater. Eng., 2012, 41, (S1), 327–330.
   Google Scholar
• Yin S., Wang X. F., Xu B. P. and Li W. Y.: ‘Examination on the calculation method for modelling the multi-particle impact process in cold spraying’, J. Therm. Spray Technol., 2010, 5, (19), 1032–1041.
   Google Scholar
• Yu M., Li W. Y. and Wang F. F.: ‘Finite element simulation of impacting behavior of particles in cold spraying by Eulerian approach’, J. Therm. Spray Technol., 2012, 21, (3–4), 745–752.
   Web of Science ®Google Scholar
• Wang F. F., Li W. Y., Yu M. and Liao H. L.: ‘Prediction of critical velocity during cold spraying based on a coupled thermo-mechanical Eulerian model’, J. Therm. Spray Technol., 2014, 23, (1–2), 60–67.
   Web of Science ®Google Scholar
• Yu M., Li W. Y., Wang F. F., Suo X. K. and Liao H. L.: ‘Effect of particle and substrate preheating on particle deformation behavior in cold spraying’, Surf. Coat. Technol., 2013, 220, 174–178.
   Web of Science ®Google Scholar
• Li W. Y., Yin S. and Wang X. F.: ‘Numerical investigations of the effect of oblique impact on particle deformation in cold spraying by the SPH method’, Appl. Surf. Sci., 2010, 256, (12), 3725–3734.
   Web of Science ®Google Scholar
• Manap A., Nooririnah O., Misran H., Okabe T. and Ogawa K.: ‘Experimental and SPH study of cold spray impact between similar and dissimilar metals’, Surf. Eng., to be published.
   Web of Science ®Google Scholar
• Schmidt T., Gartner F., Assadi H. and Kreye H.: ‘Development of a generalized parameter window for cold spray deposition’, Acta. Mater., 2006, 54, (3), 729–742.
   Web of Science ®Google Scholar
• Li W. Y., Li C. J., Wang Y. Y. and Yang G. J.: ‘Effect of parameters of cold sprayed Cu particles on its impacting behaviour’, Acta. Metall. Sin., 2005, 41, (3), 282–286.
   Web of Science ®Google Scholar
• Kim K., Watanabe M. and Kuroda S.: ‘Thermal softening effect on the deposition efficiency and microstructure of warm sprayed metallic powder’, Scr. Mater., 2009, 60, (8), 710–713.
   Web of Science ®Google Scholar
• Binder K., Gottschalk J., Kollenda M., Gärtner F. and Klassen T.: ‘Influence of impact angle and gas temperature on mechanical properties of titanium cold spray deposits’, J. Therm. Spray Technol., 2011, 20, (1–2), 234–242.
   Web of Science ®Google Scholar
• Lee J., Shin S., Kim H. and Lee C.: ‘Effect of gas temperature on critical velocity and deposition characteristics in kinetic spraying’, Appl. Surf. Sci., 2007, 253, (7), 3512–3520.
   Web of Science ®Google Scholar
• Yu M., Li W. Y., Wang F. F. and Liao H. L.: ‘Effect of preheating on deformation in cold spraying dissimilar combinations’, Surf. Eng., to be published.
   Web of Science ®Google Scholar
• Li C. J., Li W. Y. and Liao H. L.: ‘Examination of the critical velocity for deposition of particles in cold spraying’, J. Therm. Spray Technol., 2006, 15, (2), 212–222.
   Web of Science ®Google Scholar
• Kang K., Yoon S., Ji Y. and Lee C.: ‘Oxidation dependency of critical velocity for aluminum feedstock deposition in kinetic spraying process’, Mater. Sci. Eng. A, 2008, A486, (1–2), 300–307.
   Google Scholar
• Li W. Y., Liao H. L., Li C. J., Bang H. S. and Coddet C.: ‘Numerical simulation of deformation behavior of Al particles impacting on Al substrate and effect of surface oxide films on interfacial bonding in cold spraying’, Appl. Surf. Sci., 2007, 11, (253), 5084–5509.
   Google Scholar
• Yin S., Wang X. F., Li W. Y., Liao H. L. and Jie H. E.: ‘Deformation behavior of the oxide film on the surface of cold sprayed powder particle’, Appl. Surf. Sci., 2012, 259, 294–300.
   Web of Science ®Google Scholar
• Li C. J., Wang H. T., Zhang Q., Yang G. J., Li W. Y. and Liao H. L.: ‘Influence of spray materials and their surface oxidation on the critical velocity in cold spraying’, J. Therm. Spray Technol., 2010, 19, (1–2), 95–101.
   Web of Science ®Google Scholar
• van Steenkiste T. H., Smith J. R., Teets R. E., Moleski J. J., Gorkiewicz D. W., Tison R. P., Marantz D. R., Kowalsky K. A., Riggs W. L., Zajchowski P. H., Pilsner B., McCune R. C. and Barnett K. J.: ‘Kinetic spray coatings’, Surf. Coat. Technol., 1999, 111, (1), 62–71.
   Web of Science ®Google Scholar
• Gilmore D. L., Dykhuizen R. C., Neiser R. A., Smith M. F. and Roemer T. J.: ‘Particle velocity and deposition efficiency in the cold spray process’, J. Therm. Spray Technol., 1999, 8, (4), 576–582.
   Web of Science ®Google Scholar
• Li C. J., Li W. Y., Wang Y. Y. and Fukanuma H.: ‘Effect of spray angle on deposition characteristics in cold spraying’, Proc. Int. Thermal Spray Conf. 2003: ‘Advancing the science and applying the technology’, Orlando, FL, USA, May 2003, ASM International, 5–8.
   Google Scholar
• Yin S., Wang X. F., Li W. Y. and Xu B. P.: ‘Numerical study on the effect of substrate angle on particle impact velocity and normal velocity component in cold gas dynamic spraying based on CFD’, J. Therm. Spray Technol., 2010, 19, (6), 1155–1162.
   Web of Science ®Google Scholar
• Li W. Y., Zhang C., Wang H. T., Guo X. P., Liao H. L., Li C. J. and Coddet C.: ‘Significant influences of metal reactivity and oxide films at particle surfaces on coating microstructure in cold spraying’, Appl. Surf. Sci., 2007, 253, (7), 3557–3562.
   Web of Science ®Google Scholar