References
- Shi Z, Wu S, Szpunar JA and Roshd M: ‘An observation of palladium membrane formation on a porous stainless steel substrate by electroless deposition’, J. Membr. Sci., 2006, 280, 705–711.
- Okazaki J, Ikeda T, Tanaka DAP, Sato K, Suzuki TM and Mizukami F: ‘An investigation of thermal stability of thin palladium–silver alloy membranes for high temperature hydrogen separation’, J. Membr. Sci., 2011, 366, (1–2), 212–219.
- Wei L, Yu J and Huang Y: ‘Silver coating on porous stainless steel substrate and preparation of H2-permeable palladium membranes’, Int. J. Hydrogen Energy, 2013, 38, I0833eI0838.
- Bryden KJ and Ying JY: ‘Nanostructured palladium membrane synthesis by magnetron sputtering’, Mater. Sci. Eng. A, 1995, A204, (1–2), 140–145.
- Tong HD, Vanden Berg AHJ, Gardeniers JGE, Jansen HV, Gielens FC and Elwenspoek MC: ‘Preparation of palladium–silver alloy films by a dual-sputtering technique and its application in hydrogen separation membrane’, Thin Solid Films, 2005, 479, (1–2), 89–94.
- Huang L, Chen CS, He ZD, Peng DK and Meng GY: ‘Palladium membranes supported on porous ceramics prepared by chemical vapor deposition’, Thin Solid Films, 1997, 302, (1–2), 98–101.
- Lu SY and Lin YZ: ‘Pd–Ag alloy films prepared by metallorganic chemical vapor deposition process’, Thin Solid Films, 2000, 376, (1–2), 67–72.
- Chen SC, Tu GC, Hung CCY, Huang CA and Rei MH: ‘Preparation of palladium membrane by electroplating on AISI 316L porous stainless steel supports and its use for methanol steam reformer’, J. Membr. Sci., 2008, 314, (1–2), 5–14.
- Bhandari R and Ma YH: ‘Pd–Ag membrane synthesis: the electroless and electro-plating conditions and their effect on the deposits morphology’, J. Membr. Sci., 2009, 334, (1–2), 50–63.
- Kitiwan M and Atong D: ‘Effect of porous alumina support and plating time on electroless plating of palladium membrane’, J. Mater. Sci. Technol., 2010, 26, (12), 1148–1152.
- Zhang D, Zhou S, Fan Y, Xu N and He Y: ‘Preparation of dense Pd composite membranes on porous Ti–Al alloy supports by electroless plating’, J. Membr. Sci., 2012, 387–388, 24–29.
- Sari R, Yaakob Z, Ismail M, Daud WRW and Hakim L: ‘Palladium–alumina composite membrane for hydrogen separator fabricated by combined sol–gel, and electroless plating technique’, Ceram. Int., 2013, 39, 3211–3219.
- Pujari M, Agarwal A, Uppaluri R and Verma A: ‘Effect of surfactant concentration and loading ratio on the electroless plating characteristics of dense Pd composite membranes’, Ind. Eng. Chem. Res., 2014, 53, (8), 3105–3115.
- Chen BH, Hong L, Ma Y and Ko TM: ‘Effect of surfactants in an electroless nickel-plating bath on the properties of Ni–P alloy deposits’, Ind. Eng. Chem. Res., 2002, 41, (11), 2668–2678.