High temperature oxidation behaviour of Al₂O₃/Al composite coating on γ-TiAl

References

• Edalati K, Toh S, Iwaoka H, Watanabe M, Horita Z, Kashioka D, Kishida K and Inui H: ‘Ultrahigh strength and high plasticity in TiAl intermetallics with bimodal grain structure and nanotwins’, Scr. Mater., 2012, 67, 814–817.
   Web of Science ®Google Scholar
• Malstrokecka J and Krzak-Rosacute J: ‘Preparation of SiO2 coating by sol–gel method, to improve high-temperature corrosion resistance of a gamma-TiAl phase based alloy’, Adv. Mater. Sci., 2012, 12, 5–12.
   Google Scholar
• Appel F, Brossmann U, Christoph U, Eggert S, Janschek P, Lorenz U, Mullauer J, Oehring M and Paul JDH: ‘Recent progress in the development of gamma titanium aluminide alloys’, Eng. Mater., 2000, 2, 699–720.
   Web of Science ®Google Scholar
• Wang J, Song RG, Lin X and Huang WD: ‘Microstructure and properties of laser cladding TiC/TiAl composite coatings on gamma-TiAl intermetallic alloy’, Surf. Eng., 2009, 25, 196–200.
   Web of Science ®Google Scholar
• Yankov RA, Kolitsch A, von Borany J, Munnik F, Gemming S, Alexewicz A, Bracht H, Roesner H, Donchev A and Schuetze M: ‘Microstructural studies of fluorine-implanted titanium aluminides for enhanced environmental durability’, Adv. Eng. Mater., 2014, 16, 52–59.
   Web of Science ®Google Scholar
• Gauthier V, Dettenwanger F and Schutze M: ‘Oxidation behavior of gamma-TiAl coated with zirconia thermal barriers’, Intermetallics, 2002, 10, 667–674.
   Web of Science ®Google Scholar
• Dettenwanger F, Schumann E, Ruhle M, Rakowski J and Meier GH: ‘Microstructural study of oxidized gamma-TiAl’, Oxid. Met., 1998, 50, 269–307.
   Web of Science ®Google Scholar
• Malstrokecka J: ‘Effect of an Al2O3 coating on the oxidation process of a gamma-TiAl phase based alloy’, Corros. Sci., 2012, 63, 287–292.
   Web of Science ®Google Scholar
• Song Y, Dai JH and Yang R: ‘Mechanism of oxygen adsorption on surfaces of gamma-TiAl’, Surf. Sci., 2012, 606, 852–857.
   Web of Science ®Google Scholar
• Xiang LL, Zhao LL, Wang YL, Zhang LQ and Lin JP: ‘Synergistic effect of Y and Nb on the high temperature oxidation resistance of high Nb containing TiAl alloys’, Intermetallics, 2012, 27, 6–13.
   Web of Science ®Google Scholar
• Shida Y and Anada H: ‘The influence of ternary element addition on the oxidation behaviour of TiAl intermetallic compound in high temperature air’, Corros. Sci., 1993, 35, 945–953.
   Web of Science ®Google Scholar
• Taheri M, Valefi Z and Zangeneh-Madar K: ‘Influence of HVOF process parameters on microstructure and bond strength of NiCrAlY coatings’, Surf. Eng., 2012, 28, 266–272.
   Web of Science ®Google Scholar
• Marginean G and Utu D: ‘Cyclic oxidation behaviour of different treated CoNiCrAlY coatings’, Appl. Surf. Sci., 2012, 258, 8307–8311.
   Web of Science ®Google Scholar
• Huang X, Puetz P, Yang Q and Tang Z: ‘Characterisation of transient oxide formation on NiCrAlY after heat treatment in vacuum’, Surf. Eng., 2011, 27, 368–375.
   Web of Science ®Google Scholar
• Tang ZL, Wang FH and Wu WT: ‘Effect of MCrAlY overlay coatings on oxidation resistance of TiAl intermetallics’, Surf. Coat. Technol., 1998, 99, 248–252.
   Web of Science ®Google Scholar
• Kim DJ, Seo DY, Huang X, Yang Q and Kim YW: ‘Cyclic oxidation behavior of a beta gamma powder metallurgy TiAl–4Nb–3Mn alloy coated with a NiCrAlY coating’, Surf. Coat. Technol., 2012, 206, 3048–3054.
   Web of Science ®Google Scholar
• Sloof WG and Nijdam TJ: ‘On the high-temperature oxidation of MCrAlY coatings’, Int. J. Mater. Res., 2009, 100, 1318–1330.
   Web of Science ®Google Scholar
• Tang ZL, Wang FH and Wu WT: ‘Effect of Al2O3 and enamel coatings on 900 degrees C oxidation and hot corrosion behaviors of gamma-TiAl’, Mater. Sci. Eng. A, 2000, A276, 70–75.
   Google Scholar
• Zhu J, Yang W and Wang F: ‘Microstructures and mechanical properties of (Ti,Cr)Al/Al2O3 composites fabricated by reactive hot pressing from Ti, Al and Cr2O3’, J. Alloys Compd, 2013, 567, 15–20.
   Web of Science ®Google Scholar
• Yao J, He Y, Wang D and Lin J: ‘High-temperature oxidation resistance of (Al2O3–Y2O3)/(Y2O3-stabilized ZrO2) laminated coating on 8Nb–TiAl alloy prepared by a novel spray pyrolysis’, Corros. Sci., 2014, 80, 19–27.
   Web of Science ®Google Scholar
• Oechsner M, Hillman C and Lange FF: ‘Crack bifurcation in laminar ceramic composites’, J. Am. Ceram. Soc., 1996, 79, 1834–1838.
   Web of Science ®Google Scholar
• Wang QM, Zhang K, Gong J, Cui YY, Sun C and Wen LS: ‘NiCoCrAlY coatings with and without an Al2O3/Al interlayer on an orthorhombic Ti2AlNb-based alloy: oxidation and interdiffusion behaviors’, Acta Mater., 2007, 55, 1427–1439.
   Web of Science ®Google Scholar
• Zhao S, Zhao Y, Zou B, Fan X, Xu J, Hui Y, Zhou X, Liu S and Cao X: ‘ Characterization and thermal cycling behavior of La–2(Zr0·7Ce0·3)(2)O–7/8YSZ functionally graded thermal barrier coating prepared by atmospheric plasma spraying’, J. Alloys Compd, 2014, 592, 109–114.
   Web of Science ®Google Scholar
• Li HQ, Wang QM, Gong J and Sun C: ‘Interfacial reactions and oxidation behavior of Al2O3 and Al2O3/Al coatings on an orthorhombic Ti2AlNb alloy’, Appl. Surf. Sci., 2011, 257, 4105–4112.
   Web of Science ®Google Scholar
• Liu Y, Zhang L, Cheng L, Yang W, Zhang W and Xu Y: ‘Preparation and oxidation protection of CVD SiC/a-BC/SiC coatings for 3D C/SiC composites’, Corros. Sci., 2009, 51, 820–826.
   Web of Science ®Google Scholar
• Cheng YX, Wang W, Zhu SL, Xin L and Wang FH: ‘Arc ion plated-Cr2O3 intermediate film as a diffusion barrier between NiCrAlY and gamma-TiAl’, Intermetallics, 2010, 18, 736–739.
   Web of Science ®Google Scholar
• Huang JF, Wang B, Li HJ, Liu M, Cao LY and Yao CY: ‘A MoSi2/SiC oxidation protective coating for carbon/carbon composites’, Corros. Sci., 2011, 53, 834–839.
   Web of Science ®Google Scholar
• Ma X, He Y, Wang D and Zhang J: ‘Enhanced high-temperature corrosion resistance of (Al2O3–Y2O3)/Pt micro-laminated coatings on 316L stainless steel alloy’, Corros. Sci., 2012, 54, 183–192.
   Web of Science ®Google Scholar
• Panda AB, Gopikishan S, Mahapatra SK, Barhai PK, Das AK and Banerjee I: ‘Bactericidal efficiency of nanostructured Al–O/Ti–O composite thin films prepared by dual magnetron reactive co-sputtering technique’, Ceram. Int., 2014, 40, 4681–4690.
   Web of Science ®Google Scholar
• Mukherjee SK, Joshi L and Barhai PK: ‘A comparative study of nanocrystalline Cu film deposited using anodic vacuum arc and dc magnetron sputtering’, Surf. Coat. Technol., 2011, 205, 4582–4595.
   Web of Science ®Google Scholar
• Omprakash M, Arivanandhan M, Kumar RA, Morii H, Aoki T, Koyama T, Momose Y, Ikeda H, Tatsuoka H, Okano Y, Ozawa T, Babu SM, Inatomi Y and Hayakawa Y: ‘Analysis of dissolution and growth process of SiGe alloy semiconductor based on penetrated X-ray intensities’, J. Alloys Compd, 2014, 590, 96–101.
   Web of Science ®Google Scholar
• Laska N and Braun R: ‘Lifetime of thermal barrier coatings deposited on gamma-TiAl based alloys using intermetallic Ti–Al–Cr bond coats with additions of yttrium and zirconium’, Oxid. Met., 2014, 81, 83–89.
   Web of Science ®Google Scholar
• Xu J, Xie ZH and Munroe P: ‘Effect of Cr alloying on friction and wear of sputter-deposited nanocrystalline (MoxCr1−x)5Si3 films’, Intermetallics, 2011, 19, 1146–1156.
   Web of Science ®Google Scholar
• Hogmark S, Jacobson S and Larsson M: ‘Design and evaluation of tribological coatings’, Wear, 2000, 246, 20–33.
   Web of Science ®Google Scholar
• Xiao M and Matthews A: ‘Investigation of abradable seal coating performance using scratch testing’, Surf. Coat. Technol., 2007, 202, 1214–1220.
   Web of Science ®Google Scholar
• Xu Y, Miao Q, Liang W, Yang J and Yao Z: ‘Interdiffusion performance and oxidation behaviours of NiCrAlY/Al coatings on γ-TiAl’, Surf. Eng., 2014, 30, 64–70.
   Web of Science ®Google Scholar