Advanced search
Publication Cover
Surface Engineering Volume 31, 2015 - Issue 12: Titanium
Journal homepage
141
Views
2
CrossRef citations to date
0
Altmetric
Original Article

Influence of Al/Ti atomic ratio on hard Al–TiCN films

F. LiSchool of Materials Science and Engineering, Anhui University of Technology, Maanshan City, Anhui Province243002, China
,
Y. LinSchool of Materials Science and Engineering, Anhui University of Technology, Maanshan City, Anhui Province243002, China
,
W. ChenSchool of Materials Science and Engineering, Anhui University of Technology, Maanshan City, Anhui Province243002, China
,
S-C. KwonSchool of Materials Science and Engineering, Anhui University of Technology, Maanshan City, Anhui Province243002, China
,
M. LiSchool of Materials Science and Engineering, Anhui University of Technology, Maanshan City, Anhui Province243002, China
&
S. ZhangSchool of Materials Science and Engineering, Anhui University of Technology, Maanshan City, Anhui Province243002, ChinaCorrespondence[email protected]
Pages 919-922 | Received 04 Oct 2014, Accepted 16 Oct 2014, Published online: 29 Oct 2014

References

  • L. Shan, Y. Wang, J. Li, H. Li, X. Wu and J. Chen: ‘Tribological behaviours of PVD TiN and TiCN coatings in artificial seawater’, Surf. Coat. Technol., 2013, 226, 40–50.
  • Y. H. Cheng, T. Browne, B. Heckerman and E. I. Meletis: ‘Influence of the C content on the mechanical and tribological properties of the TiCN coatings deposited by LAFAD technique’, Surf. Coat. Technol., 2011, 205, 4024–4029.
  • J. Zheng, J. Hao, X. Liu, Q. Gong and W. Liu: ‘A thick TiN/TiCN multilayer film by DC magnetron sputtering’, Surf. Coat. Technol., 2012, 209, 110–116.
  • S. Paldey and S. C. Deevi: ‘Single layer and multilayer wear resistant coatings of (Ti,Al)N: a review’, Mater. Sci. Eng. A, 2003, A342, 58–79.
  • C.-H Hsu, C.-Y Lee and C.-C Lee: ‘Analysis on the corrosion behavior of DC53 tool steel coated by Ti-Al-C-N films via filtered cathodic arc deposition’, Thin Solid Films, 2009, 517, 5212–5215.
  • I. Endler, M. Höhn, M. Herrmann, H. Holzschuh, R. Pitonak, S. Ruppi, H. van den Berg, H. Westphal and L. Wilde: ‘Aluminum-rich TiAlCN coatings by low pressure CVD’, Surf. Coat. Technol., 2010, 205, 1307–1312.
  • G. Kamath, A. P. Ehiasarian, Y. Purandare and PEh Hovsepian: ‘Tribological and oxidation behaviour of TiAlCN/VCN nanoscale multilayer coating deposited by the combined HIPIMS/ (HIPIMS-UBM) technique’, Surf. Coat. Technol., 2011, 205, 2823–2829.
  • X. Zhang, Y. Qiu, Z. Tan, J. Lin, A. Xu, Y. Zeng, J. J. Moore and J. Jiang: ‘Effect of Al content on structure and properties of TiAlCN coatings prepared by magnetron sputtering’, J. Alloys Compd, 2014, 617, 81–85.
  • H. J. Choe, S.-H Kwon and J.-J Lee: ‘Tribological properties and thermal stability of TiAlCN coatings deposited by ICP-assisted sputtering’, Surf. Coat. Technol., 2013, 228, 282–285.
  • J. M. Lackner, W. Waldhauser, R. Ebner, R. J. Bakker, T. Schöberl and B. Major: ‘Room temperature pulsed laser deposited (Ti,Al)CxN1-x coatings-chemical, structural, mechanical and tribological properties’, Thin Solid Films, 2004, 468, 125–133.
  • D. Heim and R. Hochreiter: ‘TiAlN and TiAlCN deposition in an industrial PaCVD- plant ’, Surf. Coat. Technol., 1998, 98, 1553–1556.
  • F. Cai, S. Zhang, J. Li, Z. Chen, M. Li and L. Wang: ‘Effect of nitrogen partial pressure on Al-Ti-N films deposited by arc ion plating’, Appl. Surf. Sci., 2011, 258, 1819–1825.
  • X. Zhang, J. Jiang, J. Lin and J. J. Moore: ‘Effect of N2 flow on low carbon TiAlNC coatings’, Surf. Coat. Technol., 2009, 203, 3450–3453.
  • J. J. Jeong, S. K. Hwang and C. M. Lee: ‘Nitrogen flow rate dependence of the growth morphology of TiAlN films deposited by reactive sputtering’, Surf. Coat. Technol., 2002, 151–152, 82–85.
  • L. Wang, S. Zhang, Z. Chen, J. Li and M. Li: ‘Influence of deposition parameters on hard Cr-Al-N coatings deposited by multi-arc ion plating’, Appl. Surf. Sci., 2012, 258, 3629–3636.
  • J. Li, S. Zhang and M. Li: ‘Influence of the C2H2flow rate on gradient TiCN films deposited by multi-arc ion plating’, Appl. Surf. Sci., 2013, 283, 134–144.
  • S. Veprek, M. G. J. Veprek-Heijman, P. Karvankova and J. Prochazka: ‘Different approaches to superhard coatings and nanocomposites’, Thin Solid Films, 2005, 476, 1–29.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.