References
- Qiu J, Baker I, Kennedy FE, Liu Y and Munroe PR: ‘The effects of stoichiometry on the dry sliding wear of FeAl’, Intermetallics, 2013, 40, 19–27.
- Wang C, Lin YB, Guo XZ and Tao J: ‘Al2O3 reinforced Fe–Al composite coatings prepared by double glow discharge technique’, Surf. Eng., 2013, 29, 572–579.
- Xu GH, Lu Z and Zhang KF: ‘The oxidation resistance of submicron-grained NiAl–Al2O3 composite fabricated by pulse current auxiliary sintering’, Intermetallics, 2012, 31, 99–104.
- Sun Y, Flis-Kabulska I and Flis J: ‘Corrosion behavior of sediment electro-codeposited Ni-Al2O3 composite coatings’, Mater. Chem. Phys., 2014, 145, 476–483.
- Ma XX, He YD, Wang DR and Zhang J: ‘Superior high-temperature oxidation resistance of a novel (Al2O3–Y2O3)/Pt laminated coating’, Appl. Surf. Sci., 2012, 258, 4733–4740.
- Xu XQ, Zhang XF, Sun XY and Lu ZP: ‘Effects of silicon additions on the oxide scale formation of an alumina-forming austenitic alloy’, Corros. Sci., 2012, 65, 317–321.
- Hajas DE, to Baben M, Hallstedt B, Iskandar R, Mayer J and Schneider JM: ‘Oxidation of Cr2AlC coatings in the temperature range of 1230 to 1410°C’, Surf. Coat. Technol., 2011, 206, 591–598.
- Kai W, Chang MT, Liu CD, Chiang DL and Chu JP: ‘The high-temperature corrosion of Fe–28Al base alloys containing Cr and Y additions in H2/H2S/H2O mixed gases’, Mater. Sci. Eng. A, 2002, A329–A331, 734–744.
- Yan DR, Yang Y, Dong YC, Chen XG, Wang L, Zhan JX and He JN: ‘Phase transitions of plasma sprayed Fe-Al intermetallic coating during corrosion in molten zinc at 640°C’, Intermetallics, 2012, 22, 160–165.
- Liu HB, Tao J, Xu J, Chen ZF and Luo XY: ‘Microstructure and mechanical properties of alumina coatings prepared by double glow plasma technique’, Appl. Surf. Sci., 2010, 256, 5939–5945.
- Qin L, Yang KK, Liu CS and Tang B: ‘Enhanced plasma boriding with molybdenum using double glow plasma surface’, Mater. Lett., 2012, 82, 127–129.
- Lin YB, Wang C and Tao J: ‘Induction effect of α-Al2O3 seeds on formation of alumina coatings prepared by double glow plasma technique’, Surf. Coat. Technol., 2013, 235, 544–551.
- Wu MF, Si NC, Wang J and Wang FJ: ‘Analysis on growth mechanism on interfacial interlayer on Fe/Al couple’, Trans. China Weld. Inst., 2011, 32, 29–33.
- Tritremmel C, Daniel R, Lechthaler M, Polcik P and Mitterer C: ‘Influence of Al and Si content on structure and mechanical properties of arc evaporated Al-Cr-Si-N thin films’, Thin Solid Films, 2013, 534, 403–409.
- Yang WM, Luo YW, Cao YC, Li XY, Liu QL and Li CA: ‘Microstructure and oxidation resistance of thermal diffusion treatment of arc ion plating aluminum coatings’, China Surf. Eng., 2014, 27, 43–48.
- Xu Z, Zhang YM, Zhang PZ, He ZY and Gao Y: ‘Double glow plasma surface metallurgy technology’, Heat Treat., 2009, 24, 1–11.
- Xu Z, Fang BH, Zheng WN, Wang CZ and Tang B: ‘ A novel plasma surface metallurgy: Xu-Tec process’, Surf. Coat. Technol., 1990, 43–44, 1065–1073.
- Rosén J, Mráz S, Kreissig U, Music D and Schneider JM: ‘Effect of ion energy on structure and composition of cathodic arc deposited alumina thin films’, Plasma Chem. Plasma Process., 2005, 25, 303–317.
- Wallin E, Selinder TI and Elfwing M: ‘Synthesis of α-Al2O3 thin films using reactive high-power impulse magnetron sputtering’, Europhys. Lett., 2008, 82, 36–42.
- Skácelová D, Danilov V, Schäfer J, Quade A, St’ahel P, Černák M and Meichsner J: ‘Room temperature plasma oxidation in DCSBD: a new method for preparation of silicon dioxide films at atmospheric pressure’, Mater. Sci. Eng. B, 2013, B178, 651– 655.
- Nguyen TD, Kim SK and Lee DB: ‘Oxidation of nano-multilayered CrAlBN thin films between 600 and 1000°C in air’, Surf. Coat. Technol., 2010, 205, S373–S378.
- Hoglund L and Agren J: ‘Analysis of the Kirkendall effect marker migration and pore formation’, Acta Mater., 2001, 49, 1311–1317.
- Chang YY, Cheng WJ and Wang CJ: ‘Growth and surface morphology of hot-dipAl–Si on 9Cr-1Mo steel’, Mater. Charact., 2009, 60, 144–149.
- Carradò A, Taha MA and Nahed A: ‘Nanocrystalline c-Al2O3 thin film deposited by magnetron sputtering (MS) at low temperature’, J. Coat. Technol. Res., 2010, 7, 515–519.
- He ZY, Gao Y, Gu FY and Xu Z: ‘Behavior of ion bombardment in Xu-TEC process’, Vac. Technol. Mater., 1995, 1, 29–35.