Critical review of corrosion protection by cold spray coatings

References

• Dykhuizen R. C., Smith M. F., Gilmore D. L., Neiser R. A., Jiang X. and Sampath S.: ‘Impact of high velocity cold spray particles’, J. Therm. Spray Technol., 1999, 8, 559–564. doi: 10.1361/105996399770350250
   Web of Science ®Google Scholar
• Assadi H., Gärtner F., Stoltenhoff T. and Kreye H.: ‘Bonding mechanism in cold gas spraying’, Acta Mater., 2003, 51, 4379–4394. doi: 10.1016/S1359-6454(03)00274-X
   Web of Science ®Google Scholar
• Schmidt T., Gärtner F., Assadi H. and Kreye H.: ‘Development of a generalized parameter window for cold spray deposition’, Acta Mater., 2006, 54, 729–742. doi: 10.1016/j.actamat.2005.10.005
   Web of Science ®Google Scholar
• Grujicic M., Saylor J. R., Beasley D. E., DeRosset W. S. and Helfritch D.: ‘Computational analysis of the interfacial bonding between feed-powder particles and the substrate in the cold-gas dynamic-spray process’, Appl. Surf. Sci., 2003, 219, 211–227. doi: 10.1016/S0169-4332(03)00643-3
   Web of Science ®Google Scholar
• Grujicic M., Zhao C., DeRosset W. and Helfritch D.: ‘Adiabatic shear instability based mechanism for particles/substrate bonding in the cold-gas dynamic-spray process’, Mater. Des., 2004, 25, 681–688. doi: 10.1016/j.matdes.2004.03.008
   Web of Science ®Google Scholar
• Moridi A., Hassani-Gangaraj S. M. and Guagliano M.: ‘A hybrid approach to determine critical and erosion velocities in the cold spray process’, Appl. Surf. Sci., 2013, 273, 617–624. doi: 10.1016/j.apsusc.2013.02.089
   Web of Science ®Google Scholar
• Bae G., Kumar S., Yoon S., Kang K., Na H., Kim H. J. and Lee C.: ‘Bonding features and associated mechanisms in kinetic sprayed titanium coatings’, Acta Mater., 2009, 57, 5654–5666. doi: 10.1016/j.actamat.2009.07.061
   Web of Science ®Google Scholar
• Bae G., Xiong Y., Kumar S., Kang K. and Lee C.: ‘General aspects of interface bonding in kinetic sprayed coatings’, Acta Mater., 2008, 56, 4858–4868. doi: 10.1016/j.actamat.2008.06.003
   Web of Science ®Google Scholar
• Schmidt T., Assadi H., Gärtner F., Richter H., Stoltenhoff T., Kreye H. and Klassen T.: ‘From particle acceleration to impact and bonding in cold spraying’, J. Therm. Spray Technol., 2009, 18, 794–808. doi: 10.1007/s11666-009-9357-7
   Web of Science ®Google Scholar
• King P. C., Bae G., Zahiri S. H., Jahedi M. and Lee C.: ‘An experimental and finite element study of cold spray copper impact onto two aluminum substrates’, J. Therm. Spray Technol., 2009, 19, 620–634. doi: 10.1007/s11666-009-9454-7
   Web of Science ®Google Scholar
• Raletz F., Vardelle M. and Ezo'o G.: ‘Critical particle velocity under cold spray conditions’, Surf. Coat. Technol., 2006, 201, 1942–1947. doi: 10.1016/j.surfcoat.2006.04.061
   Web of Science ®Google Scholar
• Fukanuma H., Ohno N., Sun B. and Huang R.: ‘In-flight particle velocity measurements with DPV-2000 in cold spray’, Surf. Coat. Technol., 2006, 201, 1935–1941. doi: 10.1016/j.surfcoat.2006.04.035
   Web of Science ®Google Scholar
• Stoltenhoff T., Kreye H. and Richter H. J.: ‘An analysis of the cold spray process and its coatings’, J. Therm. Spray Technol., 2002, 11, 542–550. doi: 10.1361/105996302770348682
   Web of Science ®Google Scholar
• Li W. Y., Yu M., Wang F. F., Yin S. and Liao H. L.: ‘A generalized critical velocity window based on material property for cold spraying by Eulerian method’, J. Therm. Spray Technol., 2013, 23, 557–566. doi: 10.1007/s11666-013-0023-8
   Web of Science ®Google Scholar
• Li W. -Y., Li C. -J. and Liao H.: ‘Significant influence of particle surface oxidation on deposition efficiency, interface microstructure and adhesive strength of cold-sprayed copper coatings’, Appl. Surf. Sci., 2010, 256, 4953–4958. doi: 10.1016/j.apsusc.2010.03.008
   Web of Science ®Google Scholar
• Schmidt T., Gaertner F. and Kreye H.: ‘New Developments in cold spray based on higher gas and particle temperatures’, J. Therm. Spray Technol., 2006, 15, 488–494. doi: 10.1361/105996306X147144
   Web of Science ®Google Scholar
• Yin S., Wang X., Li W., Liao H. and Jie H.: ‘Deformation behavior of the oxide film on the surface of cold sprayed powder particle’, Appl. Surf. Sci., 2012, 259, 294–300. doi: 10.1016/j.apsusc.2012.07.036
   Web of Science ®Google Scholar
• Li W. Y., Liao H., Li C. J., Bang H. S. and Coddet C.: ‘Numerical simulation of deformation behavior of Al particles impacting on Al substrate and effect of surface oxide films on interfacial bonding in cold spraying’, Appl. Surf. Sci., 2007, 253, 5084–5091. doi: 10.1016/j.apsusc.2006.11.020
   Web of Science ®Google Scholar
• Zhang D., Shipway P. H. and McCartney D. G.: ‘Cold gas dynamic spraying of aluminum: the role of substrate characteristics in deposit formation’, J. Therm. Spray Technol., 2005, 14, 109–116. doi: 10.1361/10599630522666
   Web of Science ®Google Scholar
• Richer P., Jodoin B., Ajdelsztajn L. and Lavernia E. J.: ‘Substrate roughness and thickness effects on cold spray nanocrystalline Al–Mg coatings’, J. Therm. Spray Technol., 2006, 15, 246–254. doi: 10.1361/105996306X108174
   Web of Science ®Google Scholar
• Wright T. W.: ‘Shear band susceptibility: work hardening materials’, Int. J. Plast., 1992, 8, 583–602. doi: 10.1016/0749-6419(92)90032-8
   Web of Science ®Google Scholar
• Wu J., Fang H., Yoon S., Kim H. and Lee C.: ‘The rebound phenomenon in kinetic spraying deposition’, Scr. Mater., 2006, 54, 665–669. doi: 10.1016/j.scriptamat.2005.10.028
   Web of Science ®Google Scholar
• Assadi H., Schmidt T., Richter H., Kliemann J. -O., Binder K., Gärtner F., Klassen T. and Kreye H.: ‘On parameter selection in cold spraying’, J. Therm. Spray Technol., 2011, 20, 1161–1176. doi: 10.1007/s11666-011-9662-9
   Web of Science ®Google Scholar
• Rech S., Trentin A., Vezzù S., Legoux J. G., Irissou E. and Guagliano M.: ‘Influence of pre-heated Al 6061 substrate temperature on the residual stresses of multipass Al coatings deposited by cold spray’, J. Therm. Spray Technol., 2010, 20, 243–251. doi: 10.1007/s11666-010-9596-7
   Web of Science ®Google Scholar
• Moridi A., Gangaraj S. M. H., Vezzu S. and Guagliano M.: ‘Number of passes and thickness effect on mechanical characteristics of cold spray coating’, Procedia Eng., 2014, 74, 449–459. doi: 10.1016/j.proeng.2014.06.296
   Google Scholar
• Moridi A., Hassani-Gangaraj S. M., Guagliano M. and Dao M.: ‘Cold spray coating: review of material systems and future perspectives’, Surf. Eng., 2014, 30, 369–395. doi: 10.1179/1743294414Y.0000000270
   Web of Science ®Google Scholar
• Moridi A., Hassani-Gangaraj S. M., Guagliano M., Vezzu S., Fracture and fatigue, Vol. 7. Proc. Conf. of the Society for Experimental Mechanics Series, edited by Jay Carroll, 51–57; 2014, Springer International Publishing, New York.
   Google Scholar
• Moridi A., Hassani-Gangaraj S. M. and Guagliano M.: ‘On fatigue behavior of cold spray coating’, Symposium JJ – Materials fundamentals of fatigue and fracture MRS Proc. 1650, 2014.
   Google Scholar
• Olakanmi E. O. and Doyoyo M.: ‘Laser-assisted cold-sprayed corrosion- and wear-resistant coatings: a review’, J. Therm. Spray Technol., 2014, 23, 765–785. doi: 10.1007/s11666-014-0098-x
   Web of Science ®Google Scholar
• Spencer K., Fabijanic D. M. and Zhang M. -X.: ‘The use of Al–Al2O3 cold spray coatings to improve the surface properties of magnesium alloys’, Surf. Coat. Technol., 2009, 204, 336–344. doi: 10.1016/j.surfcoat.2009.07.032
   Web of Science ®Google Scholar
• Bala N., Singh H., Karthikeyan J. and Prakash S.: ‘Cold spray coating process for corrosion protection: a review’, Surf. Eng., 2014, 30, 414–421. doi: 10.1179/1743294413Y.0000000148
   Web of Science ®Google Scholar
• Koivuluoto H. and Vuoristo P.: ‘Structure and corrosion properties of cold sprayed coatings: a review’, Surf. Eng., 2014, 30, 404–413. doi: 10.1179/1743294413Y.0000000201
   Web of Science ®Google Scholar
• Champagne V. K.: ‘The cold spray materials deposition process: fundamentals and applications Cambridge’; Woodhead. http://books.google.it/books?id=5TPWGAAACAAJ 2007.
   Google Scholar
• Tao Y., Xiong T., Sun C., Kong L., Cui X., Li T. and Song G. -L.: ‘Microstructure and corrosion performance of a cold sprayed aluminium coating on AZ91D magnesium alloy’, Corros. Sci., 2010, 52, 3191–3197. doi: 10.1016/j.corsci.2010.05.023
   Web of Science ®Google Scholar
• DeForce B. S., Eden T. J. and Potter J. K.: ‘Cold spray Al–5% Mg coatings for the corrosion protection of magnesium alloys’, J. Therm. Spray Technol., 2011, 20, 1352–1358. doi: 10.1007/s11666-011-9675-4
   Web of Science ®Google Scholar
• Wang H. -R., Hou B. -R., Wang J., Wang Q. and Li W. -Y.: ‘Effect of process conditions on microstructure and corrosion resistance of cold-sprayed Ti coatings’, J. Therm. Spray Technol., 2008, 17, 736–741. doi: 10.1007/s11666-008-9256-3
   Web of Science ®Google Scholar
• Wang H. -R., Li W. -Y., Ma L., Wang J. and Wang Q.: ‘Corrosion behavior of cold sprayed titanium protective coating on 1Cr13 substrate in seawater’, Surf. Coat. Technol., 2007, 201, 5203–5206. doi: 10.1016/j.surfcoat.2006.07.104
   Web of Science ®Google Scholar
• Chavan N. M., Kiran B., Jyothirmayi A., Phani P. S. and Sundararajan G.: ‘The corrosion behavior of cold sprayed zinc coatings on mild steel substrate’, J. Therm. Spray Technol., 2013, 22, 463–470. doi: 10.1007/s11666-013-9893-z
   Web of Science ®Google Scholar
• Lahiri D., Gill P. K., Scudino S., Zhang C., Singh V., Karthikeyan J., Munroe N., Seal S. and Agarwal A.: ‘Cold sprayed aluminum based glassy coating: synthesis, wear and corrosion properties’, Surf. Coat. Technol., 2013, 232, 33–40. doi: 10.1016/j.surfcoat.2013.04.049
   Web of Science ®Google Scholar
• Cinca N. and Guilemany J. M.: ‘Structural and properties characterization of stellite coatings obtained by cold gas spraying’, Surf. Coat. Technol., 2013, 220, 90–97. doi: 10.1016/j.surfcoat.2012.11.026
   Web of Science ®Google Scholar
• Koivuluoto H., Bolelli G., Lusvarghi L., Casadei F. and Vuoristo P.: ‘Corrosion resistance of cold-sprayed Ta coatings in very aggressive conditions’, Surf. Coat. Technol., 2010, 205, 1103–1107. doi: 10.1016/j.surfcoat.2010.02.052
   Web of Science ®Google Scholar
• Guilemany J. M., Dosta S. and Miguel J. R.: ‘The enhancement of the properties of WC–Co HVOF coatings through the use of nanostructured and microstructured feedstock powders’, Surf. Coat. Technol., 2006, 201, 1180–1190. doi: 10.1016/j.surfcoat.2006.01.041
   Web of Science ®Google Scholar
• Couto M., Dosta S., Torrell M., Fernández J. and Guilemany J. M.: ‘Cold spray deposition of WC–17 and 12Co cermets onto aluminum’, Surf. Coat. Technol., 2013, 235, 54–61. doi: 10.1016/j.surfcoat.2013.07.011
   Web of Science ®Google Scholar
• Couto M., Dosta S. and Guilemany J. M.: ‘Comparison of the mechanical and electrochemical properties of WC-17 and 12Co coatings onto Al7075-T6 obtained by high velocity oxy-fuel and cold gas spraying’, Surf. Coat. Technol., 2015, 268, 180–189. doi: 10.1016/j.surfcoat.2014.04.034
   Web of Science ®Google Scholar
• Kaushal G., Bala N., Kaur N., Singh H. and Prakash S.: ‘Comparative high-temperature corrosion behavior of Ni–20Cr coatings on tb22 boiler steel produced by HVOF, D-Gun, and cold spraying’, Metall. Mater. Trans. A, 2013, 45A, 395–410.
   Web of Science ®Google Scholar
• Bala N., Singh H., Prakash S. and Karthikeyan J.: ‘Investigations on the behavior of HVOF and cold sprayed Ni–20Cr coating on tb22 boiler steel in actual boiler environment’, J. Therm. Spray Technol., 2011, 21, 144–158. doi: 10.1007/s11666-011-9698-x
   Web of Science ®Google Scholar
• Meng X., Zhang J., Zhao J., Liang Y. and Zhang Y.: ‘Influence of gas temperature on microstructure and properties of cold spray 304SS coating’, J. Mater. Sci. Technol., 2011, 27, 809–815. doi: 10.1016/S1005-0302(11)60147-3
   Web of Science ®Google Scholar
• Hussain T., McCartney D. G., Shipway P. H. and Marrocco T.: ‘Corrosion behavior of cold sprayed titanium coatings and free standing deposits’, J. Therm. Spray Technol., 2010, 20, 260–274. doi: 10.1007/s11666-010-9540-x
   Web of Science ®Google Scholar
• Koivuluoto H., Coleman A., Murray K., Kearns M. and Vuoristo P.: ‘High pressure cold sprayed (HPCS) and low pressure cold sprayed (LPCS) coatings prepared from OFHC Cu feedstock: overview from powder characteristics to coating properties’, J. Therm. Spray Technol., 2012, 21, 1065–1075. doi: 10.1007/s11666-012-9790-x
   Web of Science ®Google Scholar
• Koivuluoto H., Näkki J. and Vuoristo P.: ‘Corrosion properties of cold-sprayed tantalum coatings’, J. Therm. Spray Technol., 2008, 18, 75–82. doi: 10.1007/s11666-008-9281-2
   Web of Science ®Google Scholar
• Spencer K. and Zhang M. -X.: ‘Optimisation of stainless steel cold spray coatings using mixed particle size distributions’, Surf. Coat. Technol., 2011, 205, 5135–5140. doi: 10.1016/j.surfcoat.2011.05.020
   Web of Science ®Google Scholar
• Sova A., Grigoriev S., Okunkova A. and Smurov I.: ‘Cold spray deposition of 316L stainless steel coatings on aluminium surface with following laser post-treatment’, Surf. Coat. Technol., 2013, 235, 283–289. doi: 10.1016/j.surfcoat.2013.07.052
   Web of Science ®Google Scholar
• Balani K., Laha T., Agarwal A., Karthikeyan J. and Munroe N.: ‘Effect of carrier gases on microstructural and electrochemical behavior of cold-sprayed 1100 aluminum coating’, Surf. Coat. Technol., 2005, 195, 272–279. doi: 10.1016/j.surfcoat.2004.06.028
   Web of Science ®Google Scholar
• Sundararajan G., Sudharshan Phani P., Jyothirmayi A. and Gundakaram R. C.: ‘The influence of heat treatment on the microstructural, mechanical and corrosion behaviour of cold sprayed SS 316L coatings’, J. Mater. Sci., 2009, 44, 2320–2326. doi: 10.1007/s10853-008-3200-2
   Web of Science ®Google Scholar
• Marrocco T., Hussain T., McCartney D. G. and Shipway P. H.: ‘Corrosion performance of laser posttreated cold sprayed titanium coatings’, J. Therm. Spray Technol., 2011, 20, 909–917. doi: 10.1007/s11666-011-9637-x
   Web of Science ®Google Scholar
• Koivuluoto H., Milanti A., Bolelli G., Lusvarghi L. and Vuoristo P.: ‘High-pressure cold-sprayed Ni and Ni–Cu coatings: improved structures and corrosion properties’, J. Therm. Spray Technol., 2013, 23, 98–103. doi: 10.1007/s11666-013-0016-7
   Web of Science ®Google Scholar
• Wang Y., Normand B., Mary N., Yu M. and Liao H.: ‘Microstructure and corrosion behavior of cold sprayed SiCp/Al 5056 composite coatings’, Surf. Coat. Technol., 2014, 251, 264–275. doi: 10.1016/j.surfcoat.2014.04.036
   Web of Science ®Google Scholar
• Tao Y., Xiong T., Sun C., Jin H., Du H. and Li T.: ‘Effect of α-Al2O3 on the properties of cold sprayed Al/α-Al2O3 composite coatings on AZ91D magnesium alloy’, Appl. Surf. Sci., 2009, 256, 261–266. doi: 10.1016/j.apsusc.2009.08.012
   Web of Science ®Google Scholar
• Wang Q., Spencer K., Birbilis N. and Zhang M. -X.: ‘The influence of ceramic particles on bond strength of cold spray composite coatings on AZ91 alloy substrate’, Surf. Coat. Technol., 2010, 205, 50–56. doi: 10.1016/j.surfcoat.2010.06.008
   Web of Science ®Google Scholar
• Koivuluoto H. and Vuoristo P.: ‘Effect of ceramic particles on properties of cold-sprayed Ni-20Cr+Al2O3 coatings’, J. Therm. Spray Technol., 2009, 18, 555–562. doi: 10.1007/s11666-009-9345-y
   Web of Science ®Google Scholar
• Meydanoglu O., Jodoin B. and Kayali E. S.: ‘Microstructure, mechanical properties and corrosion performance of 7075 Al matrix ceramic particle reinforced composite coatings produced by the cold gas dynamic spraying process’, Surf. Coat. Technol., 2013, 235, 108–116. doi: 10.1016/j.surfcoat.2013.07.020
   Web of Science ®Google Scholar
• Dzhurinskiy D., Maeva E., Leshchinsky E. and Maev R. G.: ‘Corrosion protection of light alloys using low pressure cold spray’, J. Therm. Spray Technol., 2012, 21, 304–313. doi: 10.1007/s11666-011-9729-7
   Web of Science ®Google Scholar
• Dosta S., Couto M. and Guilemany J. M.: ‘Cold spray deposition of a WC–25Co cermet onto Al7075-T6 and carbon steel substrates’, Acta Mater., 2013, 61, 643–652. doi: 10.1016/j.actamat.2012.10.011
   Web of Science ®Google Scholar
• Bu H., Yandouzi M., Lu C., MacDonald D. and Jodoin B.: ‘Cold spray blended Al+Mg17Al12 coating for corrosion protection of AZ91D magnesium alloy’, Surf. Coat. Technol., 2012, 207, 155–162. doi: 10.1016/j.surfcoat.2012.06.050
   Web of Science ®Google Scholar
• Champagne V. K. and Helfritch D. J.: ‘Mainstreaming cold spray – push for applications’, Surf. Eng., 2014, 30, 396–403. doi: 10.1179/1743294414Y.0000000277
   Web of Science ®Google Scholar
• Zhou X. and Mohanty P.: ‘Electrochemical behavior of cold sprayed hydroxyapatite/titanium composite in Hanks' solution’, Electrochim. Acta, 2012, 65, 134–140. doi: 10.1016/j.electacta.2012.01.018
   Web of Science ®Google Scholar
• AL-Mangour B., Mongrain R., Irissou E. and Yue S.: ‘Improving the strength and corrosion resistance of 316L stainless steel for biomedical applications using cold spray’, Surf. Coat. Technol., 2013, 216, 297–307. doi: 10.1016/j.surfcoat.2012.11.061
   Web of Science ®Google Scholar
• Noorakma A. C. W., Zuhailawati H., Aishvarya V. and Dhindaw B. K.: ‘Hydroxyapatite-coated magnesium-based biodegradable alloy: cold spray deposition and simulated body fluid studies’, J. Mater. Eng. Perform., 2013, 22, 2997–3004. doi: 10.1007/s11665-013-0589-9
   Web of Science ®Google Scholar
• Bala N., Singh H. and Prakash S.: ‘High temperature corrosion behavior of cold spray Ni–20Cr coating on boiler steel in molten salt environment at 900°C’, J. Therm. Spray Technol., 2009, 19, 110–118. doi: 10.1007/s11666-009-9437-8
   Web of Science ®Google Scholar
• Bala N., Singh H. and Prakash S.: ‘Accelerated hot corrosion studies of cold spray Ni–50Cr coating on boiler steels’, Mater. Des., 2010, 31, 244–253. doi: 10.1016/j.matdes.2009.06.033
   Web of Science ®Google Scholar
• Bala N., Singh H., Karthikeyan J. and Prakash S.: ‘Performance of cold sprayed Ni–20Cr and Ni–50Cr coatings on SA 516 steel in actual industrial environment of a coal fired boiler’, Mater. Corros., 2013, 64, 783–793. doi: 10.1002/maco.201106387
   Web of Science ®Google Scholar
• Kalsi S. S., Sidhu T. S., Singh H. and Karthikeyan J.: ‘Analysis of material degradation for uncoated and NiCoCrAlY cold spray coated Superfer 800H in the secondary chamber of medical waste incinerator’, Eng. Fail. Anal., 2014, 46, 238–246. doi: 10.1016/j.engfailanal.2014.09.001
   Web of Science ®Google Scholar
• Kalsi S. S., Sidhu T. S. and Singh H.: ‘Performance of cold spray coatings on Fe-based superalloy in Na2SO4–NaCl environment at 900°C’, Surf. Coat. Technol., 2014, 240, 456–463. doi: 10.1016/j.surfcoat.2014.01.001
   Web of Science ®Google Scholar
• Ma C., Liu X. and Zhou C.: ‘Cold-sprayed Al coating for corrosion protection of sintered NdFeB’, J. Therm. Spray Technol., 2013, 23, 456–462. doi: 10.1007/s11666-013-9994-8
   Web of Science ®Google Scholar
• Krebs S., Gärtner F. and Klassen T.: ‘Cold spraying of Cu–Al–bronze for cavitation protection in marine environments’, J. Therm. Spray Technol., 2014, 45, 708–716.
   Google Scholar