Characteristics of cold sprayed dendritic Cu coatings

References

• C. Borchers, F. Gartner, T. Stoltenhoff, H. Assadi and H. Kreye: ‘Microstructural and macroscopic properties of cold sprayed copper coatings’, J. Appl. Phys., 2003, 93, 10064–10070. doi: 10.1063/1.1573740
   Web of Science ®Google Scholar
• M. Grujicic, J. R. Saylor, D. E. Beasley, W. S. DeRosset and D. Helfritch: ‘Computational analysis of the interfacial bonding between feed-powder particles and the substrate in the cold-gas dynamic-spray process’, Appl. Surf. Sci., 2003, 219, 211–227. doi: 10.1016/S0169-4332(03)00643-3
   Web of Science ®Google Scholar
• S. Barradas, R. Molins, M. Jeandin, M. Arrigoni, M. Boustie, C. Bolis, L. Berthe and M. Ducos: ‘Application of laser shock adhesion testing to the study of the interlamellar strength and coating–substrate adhesion in cold-sprayed copper coating of aluminum’, Surf. Coat. Technol., 2005, 197, 18–27. doi: 10.1016/j.surfcoat.2004.08.222
   Web of Science ®Google Scholar
• W. Y. Li, H. Liao, C. J. Li, G. Li, C. Coddet and X. Wang: ‘On high velocity impact of micro-sized metallic particles in cold spraying’, Appl. Surf. Sci., 2006, 253, 2852–2862. doi: 10.1016/j.apsusc.2006.05.126
   Web of Science ®Google Scholar
• X. J. Ning, J. H. Jang and H. J. Kim: ‘The effects of powder properties on in-flight particle velocity and deposition process during low pressure cold spray process’, Appl. Surf. Sci., 2007, 253, 7449–7455. doi: 10.1016/j.apsusc.2007.03.031
   Web of Science ®Google Scholar
• P. Sudharshan Phani, D. Srinivasa Rao, S. V. Joshi and G. Sundararajan: ‘Effect of process parameters and heat treatments on properties of cold sprayed copper coatings’, J. Therm. Spray Technol., 2007, 16, 425–434. doi: 10.1007/s11666-007-9048-1
   Web of Science ®Google Scholar
• W. Y. Li, C. Zhang, X. P. Guo, G. Zhang, H. L. Liao, C. J. Li and C. Coddet: ‘Effect of standoff distance on coating deposition characteristics in cold spraying’, Mater. Des., 2008, 29, 297–304. doi: 10.1016/j.matdes.2007.02.005
   Web of Science ®Google Scholar
• Y. K. Han, N. Birbilis, K. Spencer, M. X. Zhang and B. C. Muddle: ‘Investigation of Cu coatings deposited by kinetic metallization’, Mater. Charact., 2010, 61, 1167–1186. doi: 10.1016/j.matchar.2010.07.011
   Web of Science ®Google Scholar
• B. Wielage, T. Grund, C. Rupprecht and S. Kuemmel: ‘New method for producing power electronic circuit boards by cold-gas spraying and investigation of adhesion mechanisms’, Surf. Coat. Technol., 2010, 205, 1115–1118. doi: 10.1016/j.surfcoat.2010.06.020
   Web of Science ®Google Scholar
• W. Y. Li, C. J. Li and H. Liao: ‘Significant influence of particle surface oxidation on deposition efficiency, interface microstructure and adhesive strength of cold-sprayed copper coatings’, Appl. Surf. Sci., 2010, 256, 4953–4958. doi: 10.1016/j.apsusc.2010.03.008
   Web of Science ®Google Scholar
• J. F. Li, P. A. Agyakwa, C. M. Johnson, D. Zhang, T. Hussain and D. G. McCartney: ‘Characterization and solderability of cold sprayed Sn–Cu coatings on Al and Cu substrates’, Surf. Coat. Technol., 2010, 204, 1395–1404. doi: 10.1016/j.surfcoat.2009.09.025
   Web of Science ®Google Scholar
• C. J. Li, H. T. Wang, Q. Zhang, G. J. Yang, W. Y. Li and H. L. Liao: ‘Influence of spray materials and their surface oxidation on the critical velocity in cold spraying’, J. Therm. Spray Technol., 2010, 19, 95–101. doi: 10.1007/s11666-009-9427-x
   Web of Science ®Google Scholar
• H. Koivuluoto and P. Vuoristo: ‘Effect of powder type and composition on structure and mechanical properties of Cu+Al2O3 coatings prepared by using low-pressure cold spray process’, J. Therm. Spray Technol., 2010, 19, 1081–1092. doi: 10.1007/s11666-010-9491-2
   Web of Science ®Google Scholar
• H. Nakano, M. Yamada, M. Fukumoto and E. Yamaguchi: ‘Microstructure of interfacial region between cold-sprayed copper coating and AlN substrate coated with sputtered titanium and copper’, J. Therm. Spray Technol., 2011, 20, 407–411. doi: 10.1007/s11666-010-9522-z
   Web of Science ®Google Scholar
• L. Venkatesh, N. M. Chavan and G. Sundararajan: ‘The influence of powder particle velocity and microstructure on the properties of cold sprayed copper coatings’, J. Therm. Spray Technol., 2011, 20, 1009–1021. doi: 10.1007/s11666-011-9614-4
   Web of Science ®Google Scholar
• P. D. Eason, J. A. Fewkes, S. C. Kennett, T. J. Eden, K. Tello, M. J. Kaufman and M. Tiryakioglu: ‘On the characterization of bulk copper produced by cold gas dynamic spray processing in as fabricated and annealed conditions’, Mater. Sci. Eng. A, 2011, A528, 8174–8178. doi: 10.1016/j.msea.2011.07.012
   Web of Science ®Google Scholar
• K. H. Ko, J. O. Choi and H. Lee: ‘Intermixing and interfacial morphology of cold-sprayed Al coatings on steel’, Mater. Lett., 2014, 136, 45–47. doi: 10.1016/j.matlet.2014.07.142
   Web of Science ®Google Scholar