References
- V. K. Champagne: ‘The cold spray materials deposition process: fundamentals and applications’, 25–27; 2007, New York, Woodhead Publishing.
- G. E. J. Poinern, S. Brundavanam and D. Fawcett: ‘Biomedical magnesium alloys: a review of material properties, surface modifications and potential as a biodegradable orthopaedic implant’, J. Biomed. Eng., 2012, 6, 218–240.
- A. Choudhuri, P. S. Mohanty and J. Karthikeyan: ‘Bio-ceramic composite coatings by cold spray technology’, Proc. Int. Conf. on ‘Thermal spray’, Las Vegas, NV, USA, May 2009, ASM International, 391–396.
- R. S. Lima, A. Kucuk, C. C. Berndt, J. Karthikeyan, C. M. Kay and J. Lindemann: ‘Deposition efficiency, mechanical properties and coating roughness in cold-sprayed titanium’, J. Mater. Sci., 2002, 21, 1687–1689.
- C. Li and W. Li: ‘Deposition characteristics of titanium coating in cold spraying’, Surf. Coat. Technol., 2003, 167, 278–283.
- H. K. Kang and S. B. Kang: ‘Tungsten/copper composite deposits produced by a cold spray’, Scr. Mater., 2013, 49, 1169–1174.
- H. Lee, S. Jung, S. Lee, Y. You and Y. Ko: ‘Correlation between Al2O3 particles and interface of Al–Al2O3 coatings by cold spray’, Appl. Surf. Sci., 2005, 252, 1891–1898.
- T. Van Steenkiste: ‘Kinetic sprayed rare earth iron alloy composite coatings’, J. Therm. Spray Technol., 2006, 15, 501–506.
- X. Zheng, M. Huang and C. Ding: ‘Bond strength of plasma sprayed hydroxyapatite/Ti composite coatings’, Biomaterials, 2000, 21, 841–849.
- P. King, S. Zahiri and M. Jahedi: ‘Rare earth/metal composite formation by cold spray’, J. Therm. Spray Technol., 2007, 17, 221–227.
- C. W. Abdullah, H. Zuhailawati, V. Aishvarya and B. K. Dhindaw: ‘Hydroxyapatite-coated magnesium-based biodegradable alloy: cold spray deposition and simulated body fluid studies’, J. Mater. Eng. Perform., 2013, 10, 2997–3004.
- C. D. Montgomery: ‘Design and analysis of experiments’, 7th edn; 2009, New York, John Wiley & Son.
- J. F. Li, H. L. Lioa, C. X. Ding and C. Coddet: ‘Optimizing the plasma spray process parameters of yttria stabilized zirconia coatings using a uniform design of experiments’, J. Mater. Process. Technol., 2005, 160, 34–42.
- A. I. Khuri and J. A. Cornell: ‘Response surface: design and analyses’, 2nd edn, 105–110; 1996, New York, Marcel Dekker.
- J. O. Klieman, H. Gutzman, F. Gartner, T. Klassen and I. Jursic: ‘Formation of cold sprayed ceramic titanium dioxide layers on metal surfaces’, J. Therm. Spray Technol., 2010, 20, 292–298.
- S. Tarasov, V. Rubtsov and A. Kolubaev: ‘Subsurface shear instabilities and nanostructuring of metals in sliding’, Wear, 2010, 268, 1–2, 59–66.
- E. M. Savitsky: ‘The influence of temperature on the mechanical properties of metals and alloys’; 1957, Moscow, Publishing House of the Academy of Sciences.
- H. Y. Lee, Y. H. Yu, Y. P. Hong and K. H. Ko: ‘Thin film coatings of WO by cold gas dynamic spray’, J. Therm. Spray Technol., 2005, 14, 183–186.
- H. Assadi, T. Schmidt, H. Richter, J. O. Kliemann, K. Binder, F. Gartner, T. Klassen and H. Kreye: ‘On parameter selection in cold spraying’, J. Therm. Spray Technol., 2011, 6, 1161–1176.
- A. Moridi, S. M. H. Gangaraj, M. Guagliano and M. Dao: ‘Cold spray coating: review of material systems and future perspectives’, Surf. Eng., 2014, 36, 369–395.