Mechanical properties of cold sprayed titanium and nickel based coatings

References

• P. Cavaliere: ‘Cold spray coating technology for metallic components repairing’, in ‘Through-life engineering services: motivation theory and practice’, (ed. L. Redding and R. Roy), 175–184; doi 10.1007/978-3-319-12111-6_11 2015, Springer International Publishing.
   Google Scholar
• O. Nooririnah, A. Y. Khalil, M. S. Aludin, A. Rohana and R. R. Zuraidah: ‘Overview potential applications of Cold spray process for aviation industry in Malaysia’, Adv. Mater. Res., 2013, 701, 375–377. doi: 10.4028/www.scientific.net/AMR.701.375
   Google Scholar
• R. Jones, M. Krishnapillai, K. Cairns and N. Matthews: ‘Application of infrared thermography to study crack growth and fatigue life extension procedures’, Fatigue Fract. Eng. Mater. Struct., 2010, 33, (12), 871–884. doi: 10.1111/j.1460-2695.2010.01505.x
   Web of Science ®Google Scholar
• V. K. Champagne and D. J. Helfritch: ‘Mainstreaming cold spray – push for applications’, Surf. Eng., 2014, 30, (6), 396–403. doi: 10.1179/1743294414Y.0000000277
   Web of Science ®Google Scholar
• H. Koivuluoto and P. Vuoristo: ‘Structure and corrosion properties of cold sprayed coatings: a review’, Surf. Eng., 2014, 30, (6), 404–413. doi: 10.1179/1743294413Y.0000000201
   Web of Science ®Google Scholar
• S. Grigoriev, A. Okunkova, A. Sova, P. Bertrand and I. Smurov: ‘Cold spraying: from process fundamentals towards advanced applications’, Surf. Coat. Technol., 2014, http://dx.doi.org/10.1016/j.surfcoat.2014.09.060.
   Google Scholar
• A. Moridi, S. M. Hassani-Gangaraj, M. Guagliano and M. Dao: ‘Cold spray coating: review of material systems and future perspectives’, Surf. Eng., 2014, 30, (6), 369–395. doi: 10.1179/1743294414Y.0000000270
   Web of Science ®Google Scholar
• P. Cavaliere, A. Perrone and A. Silvello: ‘Mechanical and microstructural behavior of nanocomposites produced via cold spray’, Composites B, 2014, 67B, 326–331.
   Google Scholar
• P. Cavaliere, A. Perrone and A. Silvello: ‘Processing conditions affecting grain size and mechanical properties in nanocomposites produced via cold spray’, J. Therm. Spray Technol., 2014, 23, (7), 1089–1096. doi: 10.1007/s11666-014-0093-2
   Web of Science ®Google Scholar
• S. M. Hassani-Gangaraj, A. Moridi and M. Guagliano: ‘Critical review of corrosion protection by cold spray coatings’, Surf. Eng., DOI: http://dx.doi.org/10.1179/1743294415Y.0000000018.
   Google Scholar
• N. Bala, H. Singh, J. Karthikeyan and S. Prakash: ‘Cold spray coating process for corrosion protection: a review’, Surf. Eng., 2014, 30, (6), 414–421. doi: 10.1179/1743294413Y.0000000148
   Web of Science ®Google Scholar
• A. Sova, D. Pervushin and I. Smurov: ‘Development of multimaterial coatings by cold spray and gas detonation spraying’, Surf. Coat. Technol., 2010, 205, 1108–1114. doi: 10.1016/j.surfcoat.2010.07.092
   Web of Science ®Google Scholar
• M. Yandouzi, H. Bu, M. Brochu and B. Jodoin: ‘Nanostructured Al-based metal matrix composite coating production by pulsed gas dynamic spraying process’, J. Therm. Spray Technol., 2012, 21, (3-4), 609–619. doi: 10.1007/s11666-011-9727-9
   Web of Science ®Google Scholar
• R. Arrabal, A. Pardo, M. C. Merino, M. Mohedano, P. CasajU´ s and E. Matykina: ‘Corrosion of magnesium-aluminum alloys with Al-11Si/SiC thermal spray composite coatings in chloride solution’, J. Therm. Spray Technolnol., 2011, 20, (3), 569–579. doi: 10.1007/s11666-010-9574-0
   Web of Science ®Google Scholar
• L. Kong, B. Lu, X. Cui, H. Du, T. Li and T. Xiong: ‘Oxidation behavior of TiAl3/Al composite coating on orthorhombic-Ti2AlNb based alloy at different temperatures’, J. Therm. Spray Technol., 2010, 19, (3), 650–656. doi: 10.1007/s11666-010-9473-4
   Web of Science ®Google Scholar
• A. Siao, M. Ang, C. C. Berndt and P. Cheang: ‘Deposition effects of WC particle size on cold sprayed WC–Co coatings’, Surf. Coat. Technol., 2011, 205, 3260–3267.
   Web of Science ®Google Scholar
• R. S. Lima, J. Karthikeyan, C. M. Kay, J. Lindemann and C. C. Berndt: ‘Microstructural characteristics of cold-sprayed nanostructured WC–Co coatings’, Thin Solid Films, 2002, 416, 129–135.
   Google Scholar
• H. -K. Kang and S. B. Kang: ‘Tungsten/copper composite deposits produced by a cold spray’, Scr. Mater., 2003, 49, 1169–1174. doi: 10.1016/j.scriptamat.2003.08.023
   Web of Science ®Google Scholar
• P. Sudharshan Phani, V. Vishnukanthan and G. Sundararajan: ‘Effect of heat treatment on properties of cold sprayed nanocrystalline copper alumina coatings’, Acta Mater., 2007, 55, 4441–4451.
   Web of Science ®Google Scholar
• X. -T. Luo and C. -J. Li: ‘Thermal stability of microstructure and hardness of cold-sprayed cBN/NiCrAl nanocomposite coating’, J. Therm. Spray Technol., 2012, 21, (3-4), 578–585. doi: 10.1007/s11666-011-9719-9
   Web of Science ®Google Scholar
• X. -T. Luo, G. -J. Yang and C. -J. Li: ‘Multiple strengthening mechanisms of cold-sprayed cBNp/NiCrAl composite coating’, Surf. Coat. Technol., 2011, 205, 4808–4813. doi: 10.1016/j.surfcoat.2011.04.065
   Web of Science ®Google Scholar
• X. -T. Luo, E. -J. Yang, F. -L. Shang, G. -J. Yang, C. -X. Li and C. -J. Li: ‘Microstructure, mechanical properties, and two-body abrasive wear behavior of cold-sprayed 20 vol.-% cubic BN-NiCrAl nanocomposite coating’, J. Therm. Spray Technol., 2014, 23, (7), 1181–1190. doi: 10.1007/s11666-014-0092-3
   Web of Science ®Google Scholar
• M. Grujicic, C. L. Zhao, W. S. De Rosset and D. Helfritch: ‘Analyses of the impact velocity of powder particles in the cold-gas dynamic-spray process’, Mater. Sci. Eng. A, 2004, A368, 222–230. doi: 10.1016/j.msea.2003.10.312
   Web of Science ®Google Scholar
• M. Bashirzadeh, F. Azarmi, C. P. Leither and G. Karami: ‘Investigation on relationship between mechanical properties and microstructural characteristics of metal matrix composites fabricated by cold spraying technique’, Appl. Surf. Sci., 2013, 275, 208–216. doi: 10.1016/j.apsusc.2012.12.166
   Web of Science ®Google Scholar
• ASTM C633-13: ‘Standard test method for adhesion or cohesion strength of thermal spray coatings’. Book of Standards Volume: 02.05
   Google Scholar
• S. R. Bakshi, V. Singh, K. Balani, D. G. McCartney, S. Seal and A. Agarwal: ‘Carbon nanotube reinforced aluminum composite coating via cold spraying’, Surf. Coat. Tech., 2008, 202, 5162–5169. doi: 10.1016/j.surfcoat.2008.05.042
   Web of Science ®Google Scholar
• M. Grujicic, C. L. Zhao, W. S. DeRosset and D. Helfritch: ‘Adiabatic shear instability based mechanism for particle/ substrate bonding in the cold-gas dynamic-spray process’, Mater. Des., 2004, 25, 681–688. doi: 10.1016/j.matdes.2004.03.008
   Web of Science ®Google Scholar
• T. Yang, M. Yu, H. Chen, W. Y. Li and H. L. Liao: ‘Characterisation of cold sprayed Al5056/SiCp coating: effect of SiC particle size’, Surf. Eng., DOI: http://dx.doi.org/10.1179/1743294415Y.0000000042.
   Google Scholar
• T. Yang, M. Yu, H. Chen, W. Y. Li and H. L. Liao: ‘Effect of matrix/reinforcement combination on cold sprayed coating deposition behavior’, Surf. Eng., 2014, 30, (11), 796–800. doi: 10.1179/1743294414Y.0000000346
   Web of Science ®Google Scholar
• T. Hussain: ‘Cold spraying of titanium: a review of bonding mechanisms, microstructure and properties’, Key Eng. Mater., 2013, 533, 53–90.
   Google Scholar
• G. Bae, J. I. Jang and C. Lee: ‘Correlation of particle impact conditions with bonding, nanocrystal formation and mechanical properties in kinetic sprayed nickel’, Acta Mater., 2012, 60, (8), 3524–3535. doi: 10.1016/j.actamat.2012.03.001
   Web of Science ®Google Scholar
• M. Yandouzi, L. Ajdelsztajn and B. Jodoin: ‘WC-based composite coatings prepared by the pulsed gas dynamic spraying process: effect of the feedstock powders’, Surf. Coat. Technol., 2008, 202, 3866–3877. doi: 10.1016/j.surfcoat.2008.01.036
   Web of Science ®Google Scholar
• A. Siao, M. Ang, C. C. Berndt and P. Cheang: ‘Deposition effects of WC particle size on cold sprayed WC–Co coatings’, Surf. Coat. Technol., 2011a, 205, 3260–3267.
   Web of Science ®Google Scholar
• O. Meydanoglu, B. Jodoin and E. S. Kayali: ‘Microstructure, mechanical properties and corrosion performance of 7075 Al matrix ceramic particle reinforced composite coatings produced by the cold gas dynamic spraying process’, Surf. Coat. Technol., 2013, doi: 10.1016/j.surfcoat.2013.07.020.
   PubMed Web of Science ®Google Scholar
• H. X. Hu, S. L. Jiang, Y. S. Tao, T. Y. Xiong and Y. G. Zheng: ‘Cavitation erosion and jet impingement erosion mechanism of cold sprayed Ni–Al2O3 coating’, Nucl. Eng. Des., 2011, 241, 4929–4937. doi: 10.1016/j.nucengdes.2011.09.038
   Web of Science ®Google Scholar