Publication Cover
Advances in Applied Ceramics
Structural, Functional and Bioceramics
Volume 110, 2011 - Issue 1
318
Views
46
CrossRef citations to date
0
Altmetric
Research Article

TEM investigation of hot pressed ‐10 vol.%SiC–ZrB2 composite

, , , , &
Pages 1-7 | Received 10 Feb 2010, Accepted 26 Apr 2010, Published online: 22 Nov 2013

References

  • Zhu MA, Wang YG: ‘Pressureless sintering ZrB2–SiC ceramics at low temperatures’, Mater. Lett., 2009, 63, (23), 2035–2037.
  • Liu Q, Han WN, Hu P: ‘Microstructure and mechanical properties of ZrB2–SiC nanocomposite ceramic’, Scr. Mater., 2009, 61, (7), 690–692.
  • Zhang XH, Wang Z, Hu P, Han WB, Hong CQ: ‘Mechanical properties and thermal shock resistance of ZrB2–SiC ceramic toughened with graphite flake and SiC whiskers’, Scr. Mater., 2009, 61, (8), 809–812.
  • Marschall J, Pejakovic DA, Fahrenholtz WG, Hilmas GE, Zhu SM, Ridge J, Fletcher DG, Asma CO, Thomel J: ‘Oxidation of ZrB2–SiC ultrahigh‐temperature ceramic composites in dissociated air’, J. Thermophys. Heat Transf., 2009, 23, (2), 267–278.
  • Zhang SC, Hilmas GE, Fahrenholtz WG: ‘Pressureless sintering of ZrB2–SiC ceramics’, J. Am. Ceram. Soc., 2008, 91, (1), 26–32.
  • Zhang SC, Hilmas GE, Fahrenholtz WG: ‘Pressureless densification of zirconium diboride with boron carbide additions’, J. Am. Ceram. Soc., 2006, 89, (5), 1544–1550.
  • Zhang XH, Weng L, Han J, Meng SH, Han WB: ‘Preparation and thermal ablation behavior of HfB2–SiC‐based ultra‐high‐temperature ceramics under severe heat conditions’, Int. J. Appl. Ceram. Technol., 2009, 6, (2), 134–144.
  • Weng L, Zhang XH, Han JC, Han WB, Hong CQ: ‘The effect of B4C on the microstructure and thermo‐mechanical properties of HfB2‐based ceramics’, J. Alloys Compd, 2009, 473, (1–2), 314–318.
  • Han JC, Hu P, Zhang XH, Meng SH: ‘Characteristics and mechanisms of dynamic oxidation for ZrB2–SiC based UHTC’, High‐Perform. Ceram. V, 2008, 368–372, 1722–1726.
  • Guo SQ, Kagawa Y, Nishimura T, Chung D, Yang JM: ‘Mechanical and physical behavior of spark plasma sintered ZrC–ZrB2–SiC composites’, J. Eur. Ceram. Soc., 2008, 28, (6), 1279–1285.
  • Qu Q, Han JC, Han WB, Zhang XH, Hong CQ: ‘In situ synthesis mechanism and characterization of ZrB2–ZrC–SiC ultra high‐temperature ceramics’, Mater. Chem. Phys, 2008, 110, (2–3), 216–221.
  • Zhang XH, Qu Q, Han JC, Han WB, Hong CQ: ‘Microstructural features and mechanical properties of ZrB2–SiC–ZrC composites fabricated by hot pressing and reactive hot pressing’, Scr. Mater., 2008, 59, (7), 753–756.
  • Licheri R, Orru R, Musa C, Locci AM, Cao G: ‘Consolidation via spark plasma sintering of HfB2/SiC and HfB2/HfC/SiC composite powders obtained by self‐propagating high‐temperature synthesis’, J. Alloys Compd, 2009, 478, (1–2), 572–578.
  • Sciti D, Silvestroni L, Guicciardi S, Fabbriche DD, Bellosi A: ‘Processing, mechanical properties and oxidation behavior of TaC and HfC composites containing 15 vol% TaSi2 or MoSi2’, J. Mater. Res., 2009, 24, (6), 2056–2065.
  • Li HB, Zhang LT, Cheng LF, Wang YG: ‘Ablation resistance of different coating structures for C/ZrB2–SiC composites under oxyacetylene torch flame’, International J. Appl. Ceram. Technol., 2009, 6, (2), 145–150.
  • Pavese A, Fino P, Badini C, Ortona A, Marino G: ‘HfB2/SiC as aprotective coating for 2D C‐f/SiC composites: effect of high temperature oxidation on mechanical properties’, Surf. Coat. Technol., 2008, 202, (10), 2059–2067.
  • Russo G, Marino G: ‘The USV program and UHTC development’, Proc. 4th Eur. Workshop on ‘Hot structures and thermal protection systems for space vehicles’, 29–38; 2003, Palermo, ESA Publications.
  • Guo WM, Zhang GJ, Wang PL: ‘Microstructural evolution and grain growth kinetics in ZrB2–SiC composites during heat treatment’, J. Am. Ceram. Soc., 2009, 92, (11), 2780–2783.
  • Zhang H, Yan YJ, Huang ZR, Liu XJ, Jiang DL: ‘Properties of ZrB2–SiC ceramics by pressureless sintering’, J. Am. Ceram. Soc., 2009, 92, (7), 1599–1602.
  • Zhu T, Xu L, Zhang XH, Han WB, Hu P, Weng L: ‘Densification, microstructure and mechanical properties of ZrB2–SiCw ceramic composites’, J. Eur. Ceram. Soc., 2009, 29, (13), 2893–2901.
  • Zhu T, Li WJ, Zhang XH, Hu P, Hong CQ, Weng L: ‘Damage tolerance and R‐curve behavior of ZrB2–ZrO2 composites’, Mater. Sci. Eng. A, 2009, A516, (1–2), 297–301.
  • Chen DJ, Li WJ, Zhang XH, Hu P, Han JC, Hong CQ, Han WB: ‘Microstructural feature and thermal shock behavior of hot‐pressed ZrB2–SiC–ZrO2 composite’, Mater. Chem. Phys., 2009, 116, (2–3), 348–352.
  • Liang J, Wang C, Wang Y, Jing L, Luan X: ‘The influence of surface heat transfer conditions on thermal shock behavior of ZrB2–SiC–AlN ceramic composites’, Scr. Mater., 2009, 61, (6), 656–659.
  • Zhang XH, Wang Z, Sun X, Han WB, Hong CQ: ‘Thermal shock behavior of ZrB2–20 vol.% SiC–15 vol.% graphite flake by hot pressing’, Int. J. Modern Phys. B, 2009, 23B, (6–7), 1160–1165.
  • Li WJ, Zhang Y, Zhang XH, Hong CQ, Han WB: ‘Thermal shock behavior of ZrB2–SiC ultra‐high temperature ceramics with addition of zirconia’, J. Alloys Compd, 2009, 478, (1–2), 386–391.
  • Guo WM, Zhang GJ, Kan YM, Wang PL: ‘Oxidation of ZrB2 powder in the temperature range of 650–800°C’, J. Alloys Compd, 2009, 471, (1–2), 502–506.
  • Parthasarathy TA, Rapp RA, Opeka M, Kerans RJ: ‘Effects of phase change and oxygen permeability in oxide scales on oxidation kinetics of ZrB2 and HfB2’, J. Am. Ceram. Soc., 2009, 92, (5), 1079–1086.
  • Carney CM: ‘Oxidation resistance of hafnium diboride‐silicon carbide from 1400 to 2000°C’, J. Mater. Sci., 2009, 44, (20), 5673–5681.
  • Karlsdottir SN, Halloran JW: ‘Oxidation of ZrB2–SiC: ‘Influence of SiC content on solid and liquid oxide phase formation’, J. Am. Ceram. Soc., 2009, 92, (2), 481–486.
  • Lee SJ, Kim DK: ‘The oxidation behavior of ZrB2–based mixed boride’, SiAIONs Non‐oxides, 2009, 403, 253–255.
  • Zhang G.‐J, Deng Z.‐Y, Kondo N, Yang J.‐F, Ohji T: ‘Reactive hot pressing of ZrB2–SiC composites’, J. Am. Ceram. Soc., 2000, 83, (9), 2330–2332.
  • Yan Y: ‘Pressureless sintering of high‐density ZrB2–SiC ceramic composites’, J. Am. Ceram. Soc., 2006, 89, (11), 3589–3592.
  • Hwang S: ‘Improved processing, and oxidation‐resistance of ZrB2 ultra‐high temperature ceramics containing SiC nanodispersoids’, Mater. Sci. Eng. A, 2007, A464, (1–2), 216–224.
  • Wu WW, Zhang GJ, Kan YM, Wang PL, Vanmeensel K, Vleugels J, van der Biest O: ‘Synthesis and microstructural features of ZrB2–SiC‐based composites by reactive spark plasma sintering and reactive hot pressing’, Scr. Mater., 2007, 57, (4), 317–320.
  • Monteverde F: ‘Resistance to thermal shock and to oxidation of metal diborides‐SiC ceramics for aerospace application’, J. Am. Ceram. Soc., 2007, 90, (4), 1130–1138.
  • Monteverde F, Bellosi A: ‘Oxidation of ZrB2‐based ceramics in dry air’, J. Electrochem. Soc., 2003, 150, (11), B552–B559.
  • Monteverde F, Bellosi A: ‘The resistance to oxidation of an HfB2–SiC composite’, J. Eur. Ceram. Soc., 2005, 25, (7), 1025–1031.
  • Han J: ‘Oxidation‐resistant ZrB2–SiC composites at 2200°C’, Compos. Sci. Technol., 2008, 68, (3–4), 799–806.
  • Zimmermann JW, Hilmas GE, Fahrenholtz WG, Monteverde F, Bellosi A: ‘Fabrication and properties of reactively hot pressed ZrB2–SiC ceramics’, J. Eur. Ceram. Soc., 2007, 27, (7), 2729–2736.
  • Zhang SC, Hilmas GE, Fahrenholtz WG: ‘Pressureless sintering of ZrB2–SiC ceramics’, J. Am. Ceram. Soc., 2008, 91, (1), 26–32.
  • Anishchik VM, Dorozhkin NN: ‘Electronic structure of TiB2 and ZrB2’, Phys. Status Solidi B, 2006, 160B, (1), 173–177.
  • Ching WY, Xu YN, Rulis P, Ouyang L: ‘The electronic structure and spectroscopic properties of 3C, 2H, 4H, 6H, 15R and 21R polymorphs of SiC’, Mater Sci. Eng. A, 2006, A422, 147–156.
  • Geng L, Zhang J: ‘A study of the crystal structure of a commercial b‐SiC whisker by high‐resolution TEM’, Mater. Chem. Phys., 2004, 84, (2–3), 243–246.
  • Hong MM: ‘Stacking fault energy of 6H‐SiC and 4H‐SiC single crystals’, Philos. Mag. A, 2000, 80A, (4), 919.
  • Gunnaes AA: ‘Morphology and structure of airborne β‐SiC fibres produced during the industrial production of non‐fibrous silicon carbide’, J. Mater. Sci., 2005, 40, (22), 6011.
  • Champion Y, Hagege S: ‘HREM analysis of a cubic‐hexagonal (ZrB–ZrB2) interface using the coincidence approach’, Acta Mater., 1997, 45, (6), 2621–2631.
  • Champion Y, Hagege S, Masse M: ‘Structural analysis of phases and heterophase interfaces in the zirconium‐boron system’, J. Mater. Sci., 1998, 33, (16), 4035–4041.
  • Champion Y, Hagege S: ‘Experimental determination and symmetry related analysis of orientation relationships in heterophase interfaces: a case study in the Zr–B system’, Acta Mater., 1996, 44, (10), 4169–4179.
  • Kieffer PEAR, Gugel E, Schmidt A: Mater. Res. Bull., 1968, 4, 153.
  • Kackell P, Furthmuller J, Bechstedt F: ‘Polytypic transformations in SiC: an ab initio study’, Phys. Rev. B, 1999, 60B, (19), 13261–13264.
  • Pirouz PP: ‘Polytypic transformations in silicon carbide: the role of TEM’, Ultramicroscopy, 1993, 51, (1), 189.
  • Vlaskina SI, Shin DH: ‘6H to 3C polytype transformation in silicon carbide’, Jpn J. Appl. Phys., 1998, 38, L27–L29.
  • Champion Y, Hagege S: ‘A study of composite interfaces in the Zr–ZrB2 system’, J. Mater. Sci. Lett., 1992, 11, 290–293.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.