Advanced search
Publication Cover
Advances in Applied Ceramics
Structural, Functional and Bioceramics
Volume 110, 2011 - Issue 1
Journal homepage
132
Views
23
CrossRef citations to date
0
Altmetric
Original Article

Residual stress and mechanical properties of Al2O3/ZrO2 functionally graded material prepared by EPD from 2‐butanone based suspension

M Mehrali Department of Mechanical EngineeringUniversity of Malaya, Kuala Lumpur, Malaysia
,
H Wakily Department of Mechanical EngineeringUniversity of Malaya, Kuala Lumpur, Malaysia
&
I H S C Metselaar Department of Mechanical EngineeringUniversity of Malaya, Kuala Lumpur, MalaysiaCorrespondence[email protected]
Pages 35-40 | Received 19 Jan 2010, Accepted 30 Jul 2010, Published online: 22 Nov 2013

References

  • Put S, Vleugels J, van der Biest O: ‘Microstructural engineering of functionally graded materials by electrophoretic deposition’, J. Mater. Process. Technol., 2003, 143–144, 572–577.
  • Vanmeensel K, Anné G, Jiang D, Vleugels J, van der Biest O: ‘Processing of a graded ceramic cutting tool in the Al2O3–ZrO2–Ti(C,N) system by electrophoretic deposition’, Mater. Sci. Forum, 2005, 492–493, 705–710.
  • Anné KVG, Vleugels J, van der Biest O: ‘Electrophoretic deposition as a novel near net shaping technique for functionally graded biomaterials’, Key Eng. Mater., 2006, 314, 213–218.
  • Put JVS, van der Biest O: ‘Functionally graded WC–Co materials produced by electrophoretic deposition’, Scr. Mater., 2001, 2001, 1139–1145.
  • Put S, Vleugels J, van der Biest O: ‘Electrophortic shaping of functionally graded hard metals’, Sci. Technol. Brief, 2001, 3, 14–17.
  • Anné G, Vanmeensel K, Vleugels J, van der Biest O: ‘Electrophoretic deposition as a novel near net shaping technique for functionally graded biomaterials’, Mater. Sci. Forum, 2005, 492–493, 213–218.
  • Chicatún F, Cho J, Schaab S, Brusatin G, Colombo P, Roether JA, Boccaccini AR: ‘Carbon nanotube deposits and CNT/SiO2 composite coatings by electrophoretic deposition’, Adv. Appl. Ceram., 2007, 106, 186–195.
  • Uchikoshi YST: ‘Phosphate esters as dispersants for the cathodic electrophoretic deposition of alumina suspension’, Am. Ceram. Soc., 2008, 91, 1923–1926.
  • Heavens SN: ‘Electrophoretic deposition as a processing route for ceramics’ in ‘Advanced ceramic processing and technology’, (ed. , Binner J G P), 255–283; 1990, Park Ridge, NJNoyes Publications.
  • Boccaccini AR, Zhitomirsky I: ‘Application of electrophoretic and electrolytic deposition techniques in ceramics processing’, Curr. Opin. Solid State Mater. Sci., 2002, 6, 251–260.
  • Vleugels J, Anné G, Put S, van der Biest O: ‘Thick plate‐shaped Al2O3/ZrO2 composites with continuous gradient processed by electrophoretic deposition’, Mater. Sci. Forum, 2003, 423–425, 171–176.
  • Hvizdoš P, Jonsson D, Anglada M, Anné G, van der Biest O: ‘Mechanical properties and thermal shock behaviour of an alumina/zirconia functionally graded material prepared by electrophoretic deposition’, J. Eur. Ceram. Soc., 2007, 27, 1365–1371.
  • Anné KVG, Neirinck B, van der Biest O, Vleugels J: ‘Ketone‐amine based suspensions for electrophoretic deposition of Al2O3 and ZrO2’, Eur. Ceram. Soc., 2006, 26, 3531–3537.
  • morell R: ‘Handbook of properties of technical and engineering ceramics Part 1’;. 1985, LondonHMSO.
  • Casellas D, Nagl MM, Llanes L, Anglada M: ‘Fracture toughness of alumina and ZTA ceramics: microstructural coarsening effects’, J. Mater. Process. Technol., 2003, 143–144, 148–152.
  • de Moraes MCCSB, Filho JD, de Oliveira LG: ‘Mechanical properties of alumina–zirconia composites for ceramic abutments’, Mater. Res., 2003, 7, 643–649.
  • Anstis GR, Chantikul P, Lawn BR, Marshall DB: ‘A critical evaluation of indentation techniques for measuring fracture toughness. Part I: direct crack measurements’, J. Am. Ceram. Soc., 1981, 64, 533–538.
  • Krell A: ‘Load dependence of hardness in sintered submicrometer Al2O3 and ZrO2’, J. Am. Ceram. Soc., 1995, 78, 1417–1419.
  • Celli A, Tucci A, Esposito L, Palmonari C: ‘Fractal analysis of cracks in alumina‐zirconia composites’, J. Eur. Ceram. Soc., 2003, 23, 469–479.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.