Measuring the strength of brittle materials by depth-of-penetration testing

References

• Z. Rosenberg, Y. Yeshurun, S. J. Bless and K. Okajima: ’A new definition of ballistic efficiency of brittle materials based on the use of thick backing plates’, in ’Impact loading and dynamic behaviour of materials’, (ed. C. Y. Chiem et al.), 491–498; 1988, Oberursel, DGM Informationsgesellschaft mbH.
   Google Scholar
• Z. Rosenberg and Y. Yeshurun: ’The relationship between ballistic efficiency and compressive strength of ceramic tiles’, Int. J. Impact Eng., 1988, 7, (3), 357–362.
   Web of Science ®Google Scholar
• R. L. Woodward and B. J. Baxter: ’Ballistic evaluation of ceramics: influence of test conditions’, Int. J. Impact Eng., 1994, 15, (2), 119–124.
   Web of Science ®Google Scholar
• C. Roberson and P. J. Hazell: ’Resistance of silicon carbide to penetration by a tungsten carbide cored projectile’, Ceram. Trans., 2003, 151, 165–174.
   Google Scholar
• R. Klement, S. Rolc, R. Mikulikova and J. Krestan: ’Transparent armour materials’, J. Eur. Ceram. Soc., 2008, 28, (5), 1091–1095.
   Web of Science ®Google Scholar
• P. J. Hazell, C. Roberson and M. Moutinho: ’The design of mosaic armour: the influence of tile-size on the ballistic performance’, Mater. Des., 2008, 29, (8), 1497–1503.
   Google Scholar
• P. J. Hazell, N. A. Fellows and J. G. Hetherington: ’A note on the behind armour effects from perforated alumina/aluminium targets’, Int. J. Impact Eng., 1998, 21, 589–595.
   Web of Science ®Google Scholar
• D. Ray, R. Flinders, A. Anderson and R. Cutler: ’Effect of room-temperature hardness and toughness on the ballistic performance of SiC-based ceramics’, Ceram. Sci. Eng. Proc., 2005, 26, (7), 131–142.
   Google Scholar
• C. E. Anderson, Jr and S. A. Royal-Timmons: ’Ballistic performance of confined 99.5%-A1203 ceramic tiles’, Int. J. Impact Eng., 1997, 19, (8), 703–713.
   Web of Science ®Google Scholar
• R. R. Franzen, D. L. Orphal and C. E. Anderson, Jr: ’The influence of experimental design on depth-of-penetration (DOP) test results and derived ballistic efficiencies’, Int. J. Impact Eng., 1997, 19, (8), 727–737.
   Web of Science ®Google Scholar
• B. James: ’The influence of material properties of alumina on ballistic performance’, Proc. 15th Int. Symp. on Ballistics, Jerusalem, Israel, May 1995, ADPA 3–9.
   Google Scholar
• V. Hohler, K. Weber, R. Tham, B. James, A. Barker and I. Pickup: ’Comparative analysis of oblique impact on ceramic composite systems’, Int. J. Impact Eng., 2001, 26, 333–344.
   Web of Science ®Google Scholar
• B. James: ’Depth of penetration testing’, Ceram. Trans., 2002, 134, 165–172.
   Google Scholar
• M. J. Normandia and W. A. Gooch: ’An overview of ballistic testing methods of ceramic materials’, Ceram. Trans., 2002, 134, 113–138.
   Google Scholar
• S. M. Walley: ’Historical review of high strain rate and shock properties of ceramics relevant to their application in armour’, Adv. Appl. Ceram., (2010), 109, 446–466.
   Web of Science ®Google Scholar
• Z. Rosenberg, Y. Yesherun and J. Tsaliah: ’More on the thick-backing screening technique for ceramic tiles against AP projec-
   Google Scholar
• R. L. Woodward, W. A. Gooch, Jr, R. G. O’Donnell, W. J. Perciballi, B. J. Baxter and S. D. Pattie: ’A study of fragmentation
   Google Scholar
• T. J. Holmquist and G. R. Johnson: ’Response of silicon carbide to high velocity impact–, J. Appl. Phys., 2002, 91, (9), 5858–5866.
   Web of Science ®Google Scholar
• http://www.matweb.com
   Google Scholar
• M. R. Edwards and A. Mathewson: ’The ballistic properties of tool
   Google Scholar
• F. C. Lea: ’Hardness of metals’, 4; 1936, London, Charles Griffin
   Google Scholar
• D. E. Grady: ’Span strength of condensed matter’, J. Mech. Phys.
   Web of Science ®Google Scholar
• T. J. Holmquist, A. M. Rajendran, D. W. Templeton and K. D. Bishnoi: ’A ceramic armor material database’, Report 13754, US Tank-Automotive Research, Development and Engineering Center, Warren, MI, USA, 1999.
   Google Scholar
• D. A. Shockey, A. H. Marchand, S. R. Skaggs, G. E. Cort, M. W. Burkett and R. Parker: ’Failure phenomenology of confined ceramic targets and impacting rods’, Int. J. Impact Eng., 1990, 9, (3), 263 – 275.
   Google Scholar
• C. F. Cline and M. L. Wilkins: ’The importance of material properties in ceramic armor’, Proc. Ceram. Armour Technol. Symp., Columbus, OH, USA, January 1969, 13 – 18.
   Google Scholar
• T. J. Holmquist and G. R. Johnson: ’Modeling prestressed ceramic and its effect on ballistic performance’, Int. J. Impact Eng., 2005, 31, (2), 113–127.
   Google Scholar
• A. Prengal: ’High-speed photography of the penetration of face-covered glass blocks’, Military Vehicle Technology MSc Course, Royal Military College of Science, Shrivenham, UK, 1999.
   Google Scholar
• G. R. Johnson and T. J. Holmquist: ’Some observations on the strength of failed ceramic’, Ceram. Eng. Sci. Proc., 2005, 26, (7), 3 – 10.
   Google Scholar
• M. Hallas: ’Shattered ceramic and their effectiveness as armour’, No. 1 Defence Technology MSc Course, Royal Military College of Science, Shrivenham, UK, 1997.
   Google Scholar