Synthesis and consolidation of zirconium diboride: review

References

• Fahrenholtz WG, Hilmas GE: ‘Refractory diborides of zirconium and hafnium’, J. Am. Ceram. Soc., 2007, 90, (5), 1347–1364.
   Web of Science ®Google Scholar
• Bauccio ML: ‘ASM engineered materials reference book’; 1994, Materials Park, OH, ASM International.
   Google Scholar
• Upadhyay K, Yang JM, Hoffman WP: ‘Materials for ultrahigh temperature structural application’, Am. Ceram. Soc. Bull., 1997, 76, 51–56.
   Web of Science ®Google Scholar
• Opeka MM, Talmy IG, Zaykoski JA: ‘Oxidation-based materials selection for 2000°C+hypersonic aerosurfaces: theoretical considerations and historical experience’, J. Mater. Sci., 2004, 39, 5887–5904.
   Web of Science ®Google Scholar
• Levine SR, Opila EJ, Halbig MC, Kiser JD, Singh M, Salem JA: ‘Evaluation of ultra-high temperature ceramics for aeropropulsion use’, J. Eur. Ceram. Soc., 2002, 22, 2757–2767.
   Web of Science ®Google Scholar
• Mroz C: ‘Annual mineral review: zirconium diboride’, Am. Ceram. Soc. Bull., 1995, 74, 164–165.
   Web of Science ®Google Scholar
• Mroz C: ‘Annual mineral review: zirconium diboride’, Am. Ceram. Soc. Bull., 1994, 73, 141–142.
   Web of Science ®Google Scholar
• Zaw HM, Fuh JYH, Nee AYC, Lu L: ‘Formation of a new EDM electrode material using sintering techniques’, J. Mater. Process. Technol., 1999, 89–90, 182–186.
   Web of Science ®Google Scholar
• Khanra AK, Sarkar BR, Bhattacharya B, Pathak LC, Godkhindi MM: ‘Performance of ZrB2–Cu composite as an EDM electrode’, J. Mater. Process. Technol., 2007, 83, 122–126.
   Web of Science ®Google Scholar
• Matkovich VI: ‘Boron and refractory borides’; 1977, New York, Springer-Verlag.
   Google Scholar
• Peshev P, Bliznakov G: ‘On the borothermic preparation of titanium, zirconium and hafnium diborides’, J. Less Common Met., 1968, 14, 23–32.
   Google Scholar
• Zhao H, He Y, Jin Z: ‘Preparation of zirconium boride powder’, J. Am. Ceram. Soc., 1995, 78, (9), 2534–2536.
   Web of Science ®Google Scholar
• Setoudeh N, Welham NJ: ‘Formation of zirconium diboride (ZrB2) by room temperature mechanochemical reaction between ZrO2, B2O3 and Mg’, J. Alloys Compd, 2006, 420, 225–228.
   Web of Science ®Google Scholar
• Nishiyama K, Nakamur T, Utsumi S, Sakai H, Abe M: ‘Preparation of ultrafine boride powders by metallothermic reduction method’, J Phys. Conf. Ser., 2009, 176, 012043.
   Google Scholar
• Mishra SK, Das S, Pathak LC: ‘Defect structures in zirconium diboride powder prepared by self-propagating high-temperature synthesis’, Mater. Sci. Eng. A, 2004, A364, 249–255.
   Web of Science ®Google Scholar
• Camurlu HE, Maglia F: ‘Preparation of nano-size ZrB2 powder by self-propagating high-temperature synthesis’, J. Eur. Ceram. Soc., 2009, 29, 1501–1506.
   Web of Science ®Google Scholar
• Chamberlain AL, Fahrenholtz WG, Hilmas GE: ‘Reactive hot pressing of zirconium diboride’, J. Eur. Ceram. Soc., 2009, 29, 3401–3408.
   Web of Science ®Google Scholar
• Tsuchida T, Yamamoto S: ‘Mechanical activation assisted self-propagating high-temperature synthesis of ZrC and ZrB2 in air from Zr/B/C powder mixtures’, J. Eur. Ceram. Soc., 2004, 24, 45–51.
   Web of Science ®Google Scholar
• Radev DD, Marinov M: ‘Properties of titanium and zirconium diborides obtained by self-propagated high-temperature synthesis’, J. Alloys Compd, 1996, 244, (1–2), 48–51.
   Web of Science ®Google Scholar
• Brochu M, Gauntt BD, Boyera L, Loehmanb RE: ‘Pressureless reactive sintering of ZrB2 ceramic’, J. Eur. Ceram. Soc., 2009, 29, 1493–1499.
   Web of Science ®Google Scholar
• Millet P, Hwang T: ‘Preparation of TiB2 and ZrB2 – influence of a mechanochemical treatment on the borothermic reduction of titania and zirconia’, J. Mater. Sci., 1996, 31, 351–355.
   Web of Science ®Google Scholar
• Ran S, Biest OV, Vleugels J: ‘ZrB2 powders synthesis by borothermal reduction’, J. Am. Ceram. Soc., 2010, 93, (6), 1586–1590.
   Web of Science ®Google Scholar
• Sonber JK, Murthy TSRCh, Subramanian C, Kumar S, Fotedar RK, Suri AK: ‘Investigations on synthesis of ZrB2 and development of new composites with HfB2 and TiSi2’, Int. J. Refract. Met. Hard Mater., 2011, 29, 21–30.
   Web of Science ®Google Scholar
• Guo WM, Zhang GJ: ‘Reaction processes and characterization of ZrB2 powder prepared by boro/carbothermal reduction of ZrO2 in vacuum’, J. Am. Ceram. Soc., 2009, 92, (1), 264–267.
   Web of Science ®Google Scholar
• Zhang GJ, Guo WM, Ni DW, Kan YM: ‘Ultrahigh temperature ceramics (UHTCs) based on ZrB2 and HfB2 systems: powder synthesis, densification and mechanical properties’, J. Phys. Conf. Ser., 2009, 176, 012041.
   Google Scholar
• Funke VF, Yudkovskii SI: ‘Preparation of zirconium boride’, Soviet Powder Metall. Met. Ceram., 1964, 2, (4), 293–296.
   Google Scholar
• Rupa PKP, Sharma P, Mohanty RM, Balasubramanian K: ‘Microstructure and phase composition of composite coatings formed by plasma spraying of ZrO2 and B4C powders’, J. Therm. Spray Technol., 2010, 19, (4), 816–823.
   Web of Science ®Google Scholar
• Spring A, Guo WM, Zhang GJ, Wang PL, Krsticy VD: ‘Fabrication and characterization of ZrB2-based ceramic using synthesized ZrB2–LaB6 powder’, J. Am. Ceram. Soc., 2008, 91, (8), 2763–2765.
   Web of Science ®Google Scholar
• Kosolapova TY, Serebryakova TI, Popova I, Babich VI: ‘Impurities in ZrB2 prepared by different methods’, J. Less Common Met., 1979, 6–7, 303–307.
   Google Scholar
• Khanra AK, Pathak LC, Mishra SK, Godkhindi MM: ‘Sintering of ultrafine zirconium diboride powder prepared by modified SHS technique’, Adv. Appl. Ceram., 2005, 104, (6), 282–284.
   Web of Science ®Google Scholar
• Mishra SK, Das SK: ‘Sintering and microstructural behaviour of SHS produced zirconium diboride powder with the addition of C and TiC’, Mater. Lett., 2005, 59, 3467–3470.
   Web of Science ®Google Scholar
• Mishra SK, Pathak LC: ‘Effect of carbon and titanium carbide on sintering behaviour of zirconium diboride’, J. Alloys Compd, 2008, 465, 547–555.
   Web of Science ®Google Scholar
• Mishra SK, Das SK, Ramachandrarao P, Belov DY, Mamyan S: ‘Synthesis of zirconium diboride-alumina composite by the self-propagating, high-temperature synthesis process’, Metall. Mater. Trans. A, 2003, 34A, 1979.
   Web of Science ®Google Scholar
• Mishra SK, Das SK, Sherbacov V: ‘Fabrication of Al2O3–ZrB2 in situ composite by SHS dynamic compaction: a novel approach’, Compos. Sci. Technol., 2007, 67, 2447–2453.
   Web of Science ®Google Scholar
• Lee YB, Park HC, Oh KD, Bowen CR, Stevens R: ‘Self-propagating high-temperature synthesis of ZrB2 in the system ZrO2–B2O3–Fe2O3–Al’, J. Mater. Sci. Lett., 2000, 19, 469–471.
   Google Scholar
• Khanra AK, Pathak LC, Godkhindi MM: ‘Carbothermal synthesis of zirconium diboride (ZrB2) whiskers’, Adv. Appl. Ceram., 2007, 106, (3), 155–160.
   Web of Science ®Google Scholar
• Yan Y, Huang Z, Dong S, Jiang D: ‘New route to synthesize ultra-fine zirconium diboride powders using inorganic–organic hybrid precursors’, J. Am. Ceram. Soc., 2006, 89, (11), 3585–3588.
   Web of Science ®Google Scholar
• Xie Y, Sanders TH, Speyerw RF: ‘Solution-based synthesis of submicrometer ZrB2 and ZrB2–TaB2’, J. Am. Ceram. Soc., 2008, 91, (5), 1469–1474.
   Web of Science ®Google Scholar
• Frazer EJ, Anthony KE, Welch BJ: ‘Electrodeposition of zirconium diboride from oxides dissolved in molten cryolite’, Electrodepos. Surf. Treat., 1975, 3, 169–177.
   Google Scholar
• Devyatkin SV: ‘Electrosynthesis of zirconium boride from cryolite-alumina melts containing zirconium and boron oxides’, Rus. J. Electrochem., 2001, 37, (12), 1308–1311.
   Web of Science ®Google Scholar
• Su K, Sneddon LG: ‘Polymer-precursor routes to metal borides: syntheses of TiB2, and ZrB2’, Chem. Mater., 1991, 3, 10–12.
   Web of Science ®Google Scholar
• Su K, Sneddon LG: ‘A polymer precursor route to metal borides’, Chem. Mater., 1993, 5, 1659–1668.
   Web of Science ®Google Scholar
• Motojima S, Funahashi K, Kurosawa K: ‘ZrB2 coated on copper plate by chemical vapour deposition, and its corrosion and oxidation stabilities’, Thin Solid Films, 1990, 189, 73–79.
   Web of Science ®Google Scholar
• Wang A, Male G: ‘Experimental system investigation of the Zr–B–Cl–H CVD’, J. Eur. Ceram. Soc., 1993, 11, 241–251.
   Google Scholar
• Chen L, Gu Y, Yang Z, Shi L, Ma J, Qian Y: ‘Preparation and some properties of nanocrystalline ZrB2 powders’, Scr. Mater., 2004, 50, 959–961.
   Web of Science ®Google Scholar
• Pierson JF, Belmonte T, Czerwiec T, Hertz D, Michel H: ‘Low temperature ZrB2 remote plasma enhanced chemical vapor deposition’, Thin Solid Films, 2000, 359, 68–76.
   Web of Science ®Google Scholar
• Berthon S, Male G: ‘Infiltration of zirconium diboride by ICVI in porous materials’, Compos. Sci. Technol., 1997, 57, 217–227.
   Web of Science ®Google Scholar
• Wayda AL, Scnneemeyer F, Oplla RL: ‘Low temperature deposition of zirconium and hafnium boride films by thermal decomposition of the metal borohydrides (M[BH4]4)’, Appl. Phys. Lett., 1988, 53, (5), 361–363.
   Web of Science ®Google Scholar
• Reich S, Hnrald S, Klhra H, Laszlri S: ‘Deposition of thin films of zirconium and hafnium boride by plasma enhanced chemical vapor deposition’, Adv. Mater., 1992, 4, (10), 650–653.
   Web of Science ®Google Scholar
• Randich S, Allred DD: ‘Chemically vapor-deposited ZrB2 as a selective solar absorber’, Thin Solid Films, 1981, 83, 393–398.
   Web of Science ®Google Scholar
• Fahrenholtz WG, Hilmas GE, Zhang SC, Zhu S: ‘Pressureless sintering of zirconium diboride: particle size and additive effects’, J. Am. Ceram. Soc., 2008, 91, (5), 1398–1404.
   Web of Science ®Google Scholar
• Chamberlain AL, Fahrenholtz WG, Hilmas GE: ‘Pressureless sintering of zirconium diboride’, J. Am. Ceram. Soc., 2006, 89, (2), 450–456.
   Web of Science ®Google Scholar
• Zhu S, Fahrenholtz WG, Hilmas GE, Zhang SC: ‘Pressureless sintering of carbon-coated zirconium diboride powders’, Mater. Sci. Eng. A, 2007, A459, 167–171.
   Web of Science ®Google Scholar
• Zhang SC, Hilmas GE, Fahrenholtz WG: ‘Improved oxidation resistance of zirconium diboride by tungsten carbide additions’, J. Am. Ceram. Soc., 2008, 91, (11), 3530–3535.
   Web of Science ®Google Scholar
• Zhang H, Yan Y, Huang Z, Liu X, Jiang D: ‘Properties of ZrB2–SiC ceramics by pressureless sintering’, J. Am. Ceram. Soc., 2009, 92, (7), 1599–1602.
   Web of Science ®Google Scholar
• Sciti D, Monteverde F, Guicciardi S, Pezzotti G, Bellosi A: ‘Microstructure and mechanical properties of ZrB2–MoSi2 ceramic composites produced by different sintering techniques’, Mater. Sci. Eng. A, 2006, A434, 303–309.
   Web of Science ®Google Scholar
• Wang XG, Guo WM, Zhang GJ: ‘Pressureless sintering mechanism and microstructure of ZrB2–SiC ceramics doped with boron’, Scr. Mater., 2009, 61, 177–180.
   Web of Science ®Google Scholar
• Mishra SK, Das SK, Ray AK, Ramachandrarao P: ‘Effect of Fe and Cr addition on the sintering behavior of ZrB2 produced by self-propagating high-temperature synthesis’, J. Am. Ceram. Soc., 2002, 85, (11), 2846–2848.
   Web of Science ®Google Scholar
• Cheng YM, Gadalla AM: ‘Synthesis and analysis of ZrB2-based composites’, Mater. Manuf. Process., 1996, 11, (4), 575–587.
   Web of Science ®Google Scholar
• Yan Y, Huang Z, Dong S, Jiang D: ‘Pressureless sintering of high-density ZrB2–SiC ceramic composites’, J. Am. Ceram. Soc., 2006, 89, (11), 3589–3592.
   Web of Science ®Google Scholar
• Khanra AK, Godkhindi MM: ‘Effect of Ni additives on pressureless sintering of SHS ZrB2’, Adv. Appl. Ceram., 2005, 104, (6), 273.
   Web of Science ®Google Scholar
• Sciti D, Brach M, Bellosi A: ‘Long-term oxidation behavior and mechanical strength degradation of a pressurelessly sintered ZrB2–MoSi2 ceramic’, Scr. Mater., 2005, 53, 1297–1302.
   Web of Science ®Google Scholar
• Zou J, Zhang GJ, Kan YM, Wang PL: ‘Pressureless densification of ZrB2–SiC composites with vanadium carbide’, Scr. Mater., 2008, 59, (3), 309–312.
   Web of Science ®Google Scholar
• Guo SQ, Kagava Y, Nishimura T, Tanaka H: ‘Pressureless sintering and physical properties of ZrB2- based composites with ZrSi2 additive’, Scr. Mater., 2008, 58, 579–582.
   Web of Science ®Google Scholar
• Zhu M, Wang Y: ‘Pressureless sintering ZrB2–SiC ceramics at low temperatures’, Mater. Lett., 2009, 63, 2035–2037.
   Web of Science ®Google Scholar
• Brochu M, Gauntt B, Zimmerly T, Ayala A, Loehman R: ‘Fabrication of UHTCs by conversion of dynamically consolidated Zr+B and Hf+B powder mixtures’, J. Am. Ceram. Soc., 2008, 91, (9), 2815–2822.
   Web of Science ®Google Scholar
• Chamberlain AL, Fahrenholtz WG, Hilmas GE: ‘High strength zirconium diboride based ceramics’, J. Am. Ceram. Soc., 2004, 87, (6), 1170–1172.
   Web of Science ®Google Scholar
• Monteverde F, Bellosi A, Guicciardi S: ‘Processing and properties of zirconium diboride-based composites’, J. Eur. Ceram. Soc., 2002, 22, 279–288.
   Web of Science ®Google Scholar
• Sciti D, Silvestroni L, Celotti G, Melandri C, Guicciardi S: ‘Sintering and mechanical properties of ZrB2–TaSi2 and HfB2–TaSi2 ceramic composites’, J. Am. Ceram. Soc., 2008, 91, (10), 3285–3291.
   Web of Science ®Google Scholar
• Guo SQ, Nishimura T, Mizuguchi T, Kagawa Y: ‘Mechanical properties of hot-pressed ZrB2–MoSi2–SiC composites’, J. Eur. Ceram. Soc., 2008, 28, 1891–1898.
   Web of Science ®Google Scholar
• Monteverde F, Bellosi A: ‘Effect of the addition of silicon nitride on sintering behaviour and microstructure of zirconium diboride’, Scr. Mater., 2002, 6, 223–228.
   Web of Science ®Google Scholar
• Han W, Li G, Zhang X, Han J: ‘Effect of AlN as sintering aid on hot-pressed ZrB2–SiC ceramic composite’, J. Alloys Compd, 2009, 471, 488–491.
   Web of Science ®Google Scholar
• Monteverde F: ‘Beneficial effects of an ultra-fine α-SiC incorporation on the sinterability and mechanical properties of ZrB2’, Appl. Phys. A, 2006, 82A, 329–337.
   Web of Science ®Google Scholar
• Guo SQ, Yang JM, Tanaka H, Kagawa Y: ‘Effect of thermal exposure on strength of ZrB2-based composites with nano-sized SiC particles’, Compos. Sci. Technol., 2008, 68, 3033–3040.
   Web of Science ®Google Scholar
• Zhou S, Wang Z, Sun X, Han J: ‘Microstructure, mechanical properties and thermal shock resistance of zirconium diboride containing silicon carbide ceramic toughened by carbon black’, Mater. Chem. Phys., 2010, 122, 470–473.
   Web of Science ®Google Scholar
• Tian WB, Kan YM, Zhang GJ, Wang PL: ‘Effect of carbon nanotubes on the properties of ZrB2–SiC ceramics’, Mater. Sci. Eng. A, 2008, A487, 568–573.
   Web of Science ®Google Scholar
• Yang F, Zhang X, Han J, Du S: ‘Processing and mechanical properties of short carbon fibers toughened zirconium diboride-based ceramics’, Mater. Des., 2008, 29, 1817–1820.
   Web of Science ®Google Scholar
• Zhu T, Xua L, Zhang X, Hana W, Hua P, Weng L: ‘Densification, microstructure and mechanical properties of ZrB2–SiCw ceramic composites’, J. Eur. Ceram. Soc., 2009, 29, 2893–2901.
   Web of Science ®Google Scholar
• Li W, Zhang X, Hong C, Han W, Han J: ‘Preparation, microstructure and mechanical properties of ZrB2–ZrO2 ceramics’, J. Eur. Ceram. Soc., 2009, 29, 779–786.
   Web of Science ®Google Scholar
• Zhang X, Li W, Hong C, Han W: ‘Microstructure and mechanical properties of ZrB2-based composites reinforced and toughened by zirconia’, Int. J. Appl. Ceram. Technol., 2008, 5, (5), 499–504.
   Web of Science ®Google Scholar
• Zhang X, Li X, Hana J, Hana W, Honga C: ‘Effects of Y2O3 on microstructure and mechanical properties of ZrB2–SiC ceramics’, J. Alloys Compd, 2008, 465, 506–511.
   Web of Science ®Google Scholar
• Guo WM, Vleugels J, Zhang GJ, Wang PL, Biest OV: ‘Effects of Re2O3 (Re = La, Nd, Y and Yb) addition in hot-pressed ZrB2–SiC ceramics’, J. Eur. Ceram. Soc., 2009, 29, 3063–3068.
   Web of Science ®Google Scholar
• Monteverde F, Guicciardi S, Bellosi A: ‘Advances in microstructure and mechanical properties of zirconium diboride based ceramics’, Mater. Sci. Eng. A, 2003, A346, 310–319.
   Web of Science ®Google Scholar
• Martinez JJM, Rodriguez AD, Monteverde F, Melandri C, Portu GD: ‘Characterization and high temperature mechanical properties of zirconium diboride based materials’, J. Eur. Ceram. Soc., 2002, 22, 2543–2549.
   Web of Science ®Google Scholar
• Zhang X, Hong WLC, Han W, Han J: ‘Microstructure and mechanical properties of hot pressed ZrB2–SiCp–ZrO2 composites’, Mater. Lett., 2008, 62, 2404–2406.
   Web of Science ®Google Scholar
• Zhang X, Hu P, Han J, Xu L, Meng S: ‘The addition of lanthanum hexaboride to zirconium diboride for improved oxidation resistance’, Scr. Mater., 2007, 57, 1036–1039.
   Web of Science ®Google Scholar
• Sun X, Han W, Hu P, Wang Z, Zhang X: ‘Microstructure and mechanical properties of ZrB2–Nb composite’, Int. J. Refract. Met. Hard Mater., 2010, 28, 472–474.
   Web of Science ®Google Scholar
• Wang H, Chen D, Wang CN, Zhang R, Fang D: ‘Preparation and characterization of high-toughness ZrB2/Mo composites by hot pressing process’, Int. J. Refract. Met. Hard Mater., 2009, 27, 1024–1026.
   Web of Science ®Google Scholar
• Wu H, Zhan W: ‘Fabrication and properties of ZrB2–SiC–BN machinable ceramics’, J. Eur. Ceram. Soc., 2010, 30, 1035–1042.
   Web of Science ®Google Scholar
• Li W, Zhang X, Hong C, Han W, Han J: ‘Microstructure and mechanical properties of zirconia-toughened ZrB2–MoSi2 composites prepared by hot-pressing’, Scr. Mater., 2009, 60, 100–103.
   Web of Science ®Google Scholar
• Rezaie A, Fahrenholtz WG, Hilmas GE: ‘Effect of hot pressing time and temperature on the microstructure and mechanical properties of ZrB2–SiC’, J. Mater. Sci., 2007, 42, 2735–2744.
   Web of Science ®Google Scholar
• Fahrenholtz WG, Hilmas GE, Chamberlain AL, Zimmermann JW: ‘Processing and characterization of ZrB2-based ultra-high temperature monolithic and fibrous monolithic ceramics’, J. Mater. Sci., 2004, 39, 5951–5957.
   Web of Science ®Google Scholar
• Liu G, Meng S, An J, Sun S, Ding X: ‘The evaluation of reliability for zirconium diboride composite with additives of graphite’, Int. J. Refract. Met. Hard Mater., 2009, 27, 868–871.
   Web of Science ®Google Scholar
• Guo SQ, Nishimura T, Kagawa Y, Yang JM: ‘Spark plasma sintering of zirconium diborides’, J. Am. Ceram. Soc., 2008, 91, (9), 2848–2855.
   Web of Science ®Google Scholar
• Venkateswaran T, Basu B, Raju GB, Kimb DY: ‘Densification and properties of transition metal borides-based cermets via spark plasma sintering’, J. Eur. Ceram. Soc., 2006, 26, 2431–2440.
   Web of Science ®Google Scholar
• Akin I, Hotta M, Sahin FC, Yucel O, Goller G, Goto T: ‘Microstructure and densification of ZrB2–SiC composites prepared by spark plasma sintering’, J. Eur. Ceram. Soc., 2009, 29, 2379–2385.
   Web of Science ®Google Scholar
• Carney CM, Mogilvesky P, Parthasarathy TA: ‘Oxidation behavior of zirconium diboride silicon carbide produced by the spark plasma sintering method’, J. Am. Ceram. Soc., 2009, 92, (9), 2046–2052.
   Web of Science ®Google Scholar
• Song J, Li J, Song J, Zhang L: ‘Mechanism of sintering YAG/ZrB2 multiphase ceramics with spark plasma sintering’, Mater. Manuf. Process., 2008, 23, 475–478.
   Web of Science ®Google Scholar
• Balbo A, Sciti D: ‘Spark plasma sintering and hot pressing of ZrB2–MoSi2 ultra-high-temperature ceramics’, Mater. Sci. Eng. A, 2008, A475, 108–112.
   Web of Science ®Google Scholar
• Sciti D, Silvestroni L, Nygren M: ‘Spark plasma sintering of Zr- and Hf-borides with decreasing amounts of MoSi2 as sintering aid’, J. Eur. Ceram. Soc., 2008, 28, 1287–1296.
   Web of Science ®Google Scholar
• Hu C, Sakka Y, Tanaka H, Nishimura T, Guo S, Grasso S: ‘Microstructure and properties of ZrB2–SiC composites prepared by spark plasma sintering using TaSi2 as sintering additive’, J. Eur. Ceram. Soc., 2010, 30, (12), 2625–2631.
   Web of Science ®Google Scholar
• Zhao Y, Wang LJ, Zhang GJ, Jiang W, Chen LD: ‘Effect of holding time and pressure on properties of ZrB2–SiC composite fabricated by the spark plasma sintering reactive synthesis method’, Int. J. Refract. Met. Hard Mater., 2008, 27, (1), 177–180.
   Web of Science ®Google Scholar
• Cao M, Wang S, Han W: ‘Influence of nanosized SiC particle on the fracture toughness of ZrB2-based nanocomposite ceramic’, Mater. Sci. Eng. A, 2010, A527, 2925–2928.
   Web of Science ®Google Scholar
• Bellosi A, Monteverde F, Sciti D: ‘Fast densification of ultra-high-temperature ceramics by spark plasma sintering’, Int. J. Appl. Ceram. Technol., 2006, 3, (1), 32–40.
   Web of Science ®Google Scholar
• Guo WM, Vleugels J, Zhang GJ, Wang PL, Biest OV: ‘Effect of heating rate on densification, microstructure and strength of spark plasma sintered ZrB2-based ceramics’, Scr. Mater., 2010, 62, 802–805.
   Web of Science ®Google Scholar
• Ikegami M, Matsumura K, Guo SQ, Kagawa Y, Yang JM: ‘Effect of SiC particle dispersion on thermal properties of SiC particle-dispersed ZrB2 matrix composites’, J. Mater. Sci., 2010, 45, (19), 5420–5423.
   Web of Science ®Google Scholar
• Licheri R, Orru R, Musa C, Cao G: ‘Fabrication of fully dense ZrB2 and HfB2 based ultra high temperature ceramics by combining self propagating high temperature synthesis and spark plasma sintering’, Chem. Eng. Trans., 2009, 17, 1705–1710.
   Google Scholar
• Zhu S, Fahrenholtz WG, Hilmas GE, Zhang SC, Yadlowsky EJ, Keitz MD: ‘Microwave sintering of a ZrB2–B4C particulate ceramic composite’, Composites Part A, 2008, 39, 449–453.
   Web of Science ®Google Scholar
• Sun CN, Gupta MC: ‘Laser sintering of ZrB2’, J. Am. Ceram. Soc., 2008, 91, (5), 1729–1731.
   Web of Science ®Google Scholar
• Sun CN, Baldridge T, Gupta MC: ‘Fabrication of ZrB2–Zr cermet using laser sintering technique’, Mater. Lett., 2009, 63, 2529–2531.
   Web of Science ®Google Scholar