References
- Kelly JR: ‘Ceramics in restorative and prosthetic dentistry’, Annu. Rev. Mater. Sci., 1997, 27, 443–468.
- Lawn BR, Pajares A, Zhang Y, Deng Y, Polack MA, Lloyd IK, Rekow ED, Thompson VP: ‘Materials design in the performance of all-ceramic crowns’, Biomaterials, 2004, 25, 2885–2892.
- Höland W, Schweiger M, Rheinberger VM, Kappert H: ‘Bioceramics and their application for dental restoration’, Adv. Appl. Ceram., 2009, 108, 373–380.
- Jin L, Wang SH, Wang ZY, Chen LL, Wang XH: ‘Fabrication of nanosized 3Y-TZP ceramic dental restoration frameworks on gypsum models by aqueous electrophoretic deposition’, Adv. Appl. Ceram., 2008, 107, 34–36.
- Guazzato M, Albakry M, Ringer SP, Swain MV: ‘Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II: zirconia-based dental ceramics’, Dent. Mater., 2004, 20, 449–456.
- Smuk B, Szutkowska M, Walter J: ‘Alumina ceramics with partially stabilized zirconia for cutting tools’, J. Mater. Process. Technol., 2003, 133, 195–198.
- Luo XP, Tian JM, Zhang YL, Wang L: ‘Strength and fracture of MgO-modified glass infiltrated alumina for CAD/CAM’, Dent. Mater., 2002, 18, 216–220.
- Ma J, Zhao K, Shi B, Zhang XD, Chao Y, Li XD: ‘Preparation of nano-ceramic composite as dental prosthetic material’, Key Eng. Mater., 2007, 342–343, 645–648.
- Wang H, Liao YM, Chao YL, Liang X: ‘Shrinkage and strength characterization of an alumina-glass interpenetrating phase composite for dental use’, Dent. Mater., 2007, 23, 1108–1113.
- Harmer MP, Brook RJ: ‘The effect of MgO additions on the kinetics of hot pressing in Al2O3’, J. Mater. Sci., 1980, 15, 3017–3024.
- Azhar AZA, Mohamad H, Ratnam MM, Ahmad ZA: ‘The effects of MgO addition on microstructure, mechanical properties and wear performance of zirconia-toughened alumina cutting inserts’, J. Alloys Compd, 2010, 497, 316–320.
- Bagley RD, Cutler IB, Johnson DL: ‘Effect of TiO2 on initial sintering of Al2O3’, J. Am. Ceram. Soc., 1970, 53, 136–141.
- Hwang CS, Chang YJ: ‘Effects of TiO2 on the microstructure and mechanical properties of Al2O3/ZrO2 composites’, J. Mater. Res., 1996, 11, 1545–1551.
- Wu HH, Li DC, Tang YP, Sun B, Xu DY: ‘Gelcasting of alumina based ceramic cores containing yttria for single crystal and directional solidification blades’, Adv. Appl. Ceram., 2009, 108, 406–411.
- Srdić VV, Radonjić L: ‘Transformation toughening in sol-gel-derived alumina-zirconia composites’, J. Am. Ceram. Soc., 1997, 80, 2056–2060.
- Huang XW, Wang SW, Huang XX: ‘Microstructural and mechanical properties of ZTA fabricated by liquid phase sintering’, Ceram. Int., 2003, 29, 765–769.
- Dey AK, Biswas K: ‘Dry sliding wear of zirconia-toughened alumina with different metal oxide additives’, Ceram. Int., 2009, 35, 997–1002.
- Maitra S, Das S, Sen A: ‘The role of TiO2 in the densification of low cement Al2O3–MgO spinel castable’, Ceram. Int., 2007, 33, 239–243.