References
- Ren G, Hogg PJ, Woolstencroft DH: ‘Development of low cost ceramic moulding composites as fire barriers’, Adv. Appl. Ceram., 2009, 108, (5), 319–324.
- Banas RP: ‘Lessons learned from the development and manufacture of ceramic reusable surface insulation (RSI) materials for space shuttle orbiters’, Proc. NASA/LARC Conf. on ‘Shuttle performance lessons learned’, Hampton, VA, USA, March 1983, Langley Research Centre.
- Aveston D, Kelly A: ‘Theory of multiple fractures of fibrous composites’, J. Mater. Sci., 1973, 8, 352–362.
- Grayson M: ‘Encyclopaedia of glass, ceramics, clay and cement’, new edn, 198–230; 1985, Oxford, John Wiley & Sons, Inc.
- Mackenzie KJD, Brown IWM, Ranchod P, Meinhold RH: ‘Silicate bonding of inorganic materials. Part II – chemical reactions in sodium silicates at high temperature’, J. Mater. Sci., 1991, 26, 769–775.
- Ren G: ‘Fibre reinforced ceramic moulding composites, manufacturing and characterisation’, PhD thesis, Queen Mary University of London, UK, 2000.
- ‘Liquid silicates (079/074) and solid silicates (Crystal M (P60))’, Crosfield Co., Ripon, UK, 1994
- ‘FABUTIT 320, hardener for sodium silicate bonded masses and mortars’, Chemische Fabrik Budenheim KG, Budenheim, Germany, 2000.
- Mackenzie KJD, Meinhold RH: ‘A glass-bonded ceramic material from chrysotile (white asbestos)’, J. Mater. Sci., 1994, 29, 2775–2783.
- Ambroise J, Dejean J, Pera J: ‘Study of fibre matrix interfaces in metakaoline-OPC/blended cement GRC composites’, Proc. Materials Research Society Symp. on ‘Bonding in cementitious composites’, Boston, MA, USA,December 1987, Vol. 114, Materials Research Society, 175–176.
- Ren G, Hogg PJ, Woolstencroft DH: ‘Low cost ceramic moulding composites: materials and manufacturing technology’, Adv. Appl. Ceram., 2008, 107, 329–336.
- Ren G, Hogg PJ, Woolstencroft DH: ‘Low cost ceramic moulding composites: impact properties’, Br. Ceram. Trans., 2004, 103, 158–164.
- ‘Data sheets of AR glass fibre’, Cem-FIL International Ltd, Lancashire, UK, 1996.
- McCartney LN: ‘Mechanics of matrix cracking in brittle-matrix fibre-reinforced composites’, Proc. R. Soc. Lond. A, 1987, 409A, 329–350.
- Pape PG, Plueddemann EP: ‘Methods for improving the performance of silane coupling agents’, J. Adhes. Sci. Technol., 1991, 5, 831–842.
- Plueddemann EP: ‘Composites having ionomer bonds with silanes at the interface’, J. Adhes. Sci. Technol., 1989, 3, 131–139.
- Lee RJ, Phillips DC: ‘Fracture toughness testing of high performance laminates’, Proc. Int. Conf. on ‘Testing, evaluation and quality control of composites’, Butterworth Scientific Guildford, UK, Butterworth Scientific, September 1983, 12–26.
- Kwon YW, Berner JM: ‘Matrix damage of fibrous composites: effects of thermal residual stresses and layer sequences’, Comput. Struct., 1997, 64, 375–382.
- Schapery RA: ‘Thermal expansion coefficients of composite materials based on energy principles’, J. Compos. Mater., 1968, 2, 380–404.
- Brun MK, Singh RN: ‘Effect of thermal expansion mismatch and fiber coating on the fiber/matrix interfacial shear stress in ceramic matrix composites’, Adv. Ceram. Mater., 1988, 3, 506–509.
- ‘Managing our radioactive waste safely – CoRWM’s recommendations to government’, Final report, Document 700, CoRWM, London, UK, 2006
- Lee WE, Ojovan MI, Stennett MC, Hyatt NC: ‘Immobilisation of radioactive waste in glasses, glass composite materials and ceramics’, Adv. Appl. Ceram., 2006, 105, (1), 21–31.
- Covill A, Hyatt NC, Hill J, Collier NC: ‘Development of magnesium phosphate cements for encapsulation of radioactive waste’, Adv. Appl. Ceram., 2011, 110, (3), 151–156.