Advanced search
Publication Cover
Advances in Applied Ceramics
Structural, Functional and Bioceramics
Volume 112, 2013 - Issue 7
Journal homepage
304
Views
12
CrossRef citations to date
0
Altmetric
Original Article

Synthesis and mechanism of ternary carbide Ti3AlC2 by in situ hot pressing process in TiC–Ti–Al system

T Ai School of Materials Science and EngineeringShaanxi University of Science & Technology, Xi’an710021, China; School of Materials Science and EngineeringShaanxi University of Technology, Hanzhong723003, ChinaCorrespondence[email protected]
,
F Wang School of Materials Science and EngineeringShaanxi University of Science & Technology, Xi’an710021, China
,
Y Zhang School of Materials Science and EngineeringShaanxi University of Technology, Hanzhong723003, China
,
P Jiang School of Materials Science and EngineeringShaanxi University of Technology, Hanzhong723003, China
&
X Yuan School of Materials Science and EngineeringShaanxi University of Technology, Hanzhong723003, China
Pages 424-429 | Received 01 May 2013, Accepted 24 Jun 2013, Published online: 18 Nov 2013

References

  • Liu GH, Li JT: ‘Effect of reaction atmosphere on combustion synthesis of Ti2AlN’, Adv. Appl. Ceram., 2012, 111, 196–201.
  • Wang XH, Zhou YC: ‘Solid–liquid reaction synthesis of layered machinable Ti3AlC2 ceramic’, J. Mater. Chem., 2002, 12, 455–460.
  • Tzenov NV, Barsoum MW: ‘Synthesis and characterization of Ti3AlC2’, J. Am. Ceram. Soc., 2000, 83, 825–832.
  • Wang XH, Zhou YC: ‘Microstructure and properties of Ti3AlC2 prepared by the solid–liquid reaction synthesis and simultaneous in-situ hot pressing process’, Acta Mater., 2002, 50, 3141–3149.
  • Xiao QD, Lv ZL: ‘Current carrying friction and wear characteristics of Ti3AlC2 by novel method of infiltration sintering’, Adv. Appl. Ceram., 2012, 111, 202–207.
  • Pietzka MA, Schuster JC: ‘Summary of constitutional data on the Al–C–Ti system’, J. Phase Equilib., 1994, 15, 392–400.
  • Zou Y, Sun ZM, Tada S, Hashimoto H: ‘Synthesis reactions for Ti3AlC2 through pulse discharge sintering Ti/Al4C3/TiC powder mixture’, Scr. Mater., 2006, 55, 767–770.
  • Zou Y, Sun ZM, Hashimoto H, Tada S: ‘Mechanical behavior of Ti3AlC2 prepared by pulse discharge sintering method’, Mater. Trans., 2007, 48, 2432–2435.
  • Zou Y, Sun ZM, Tada S, Hashimoto H: ‘Rapid synthesis of single-phase Ti3AlC2 through pulse discharge sintering a TiH2/Al/TiC powder mixture’, Scr. Mater., 2007, 56, 725–728.
  • Zou Y, Sun ZM, Hashimoto H, Tada S: ‘Low temperature synthesis of single-phase Ti3AlC2 through reactive sintering Ti/Al/C powders’, Mater. Sci. Eng. A, 2008, A473, 90–95.
  • Zou Y, Sun ZM, Hashimoto H, Cheng L: ‘Synthesis reactions for Ti3AlC2 through pulse discharge sintering TiH2/Al/C powder mixture’, J. Alloys Compd, 2009, 468, 217–221.
  • Ge ZB, Chen KX, Guo JM, Zhou HP, Ferreira JMF: ‘Combustion synthesis of ternary carbide Ti3AlC2 in Ti–Al–C system’, J. Eur. Ceram. Soc., 2003, 23, 567–574.
  • AI TT: ‘High-temperature oxidation behavior of un-dense Ti3AlC2 material at 1000°C in air’, Ceram. Int., 2012, 38, 2537–2541.
  • Xu XW, Fu CK, Li YX, Zhu JQ, Mei BC: ‘Fabrication of monolithic bulk Ti3AlC2 and impurity measurement by K-value method’, Trans. Nonferr. Met. Soc. China, 2006, 16, s490–s493.
  • Zhou YC, Sun ZM: ‘Microstructure and mechanism of damage tolerance for Ti3SiC2 bulk ceramics’, Mater. Res. Innov., 1999, 2, 360–363.
  • Zhou YC, Wang XH: ‘Deformation of polycrystalline Ti2AlC under compression’, Mater. Res. Innov., 2001, 5, 87–93.
  • Peng CQ, Wang CA, Song Y, Huang Y: ‘A novel simple method to stably synthesize Ti3AlC2 powder with high purity’, Mater. Sci. Eng. A, 2006, A428, 54–58.
  • Liu GH, Chen KX, Zhou HP, Guo JM, Ren KG, Ferreira JMF: ‘Layered growth of Ti2AlC and Ti3AlC2 in combustion synthesis’, Mater. Lett., 2007, 61, 779–784.
  • Barsoum MW, Brodkin D, El-Raghy T: ‘Layered machinable ceramics for high temperature applications’, Scr. Mater., 1997, 36, 535–541.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.