References
- Yen T. F., Oil Shale (Developments in Petroleum Science, 5), Elsevier, Amsterdam, 1976. ISBN 9780444414083.
- World Energy Council. Survey of energy resources executive summary, (2010) ISBN 978 0 946121 021. URL http://www.worldenergy.org/.
- Howarth R. W., Ingraffea A. and Engelder T.: Natural gas: Should fracking stop?, Nature, 2011, 477, 271–273.
- Aunela-Tapola L. A., Frandsen F. J. and Hasanen E. K.: Trace metal emissions from the Estonian oil shale fired power plant, Fuel Process. Technol., 1998, 57, 1–24.
- Adamson J., Irha N., Adamson K., Steinnes E. and Kirso U.: Effect of oil shale ash application on leaching behavior of arable soils: an experimental study. Oil Shale, 2010, 27, 250–257.
- Blinova I., Bityukova L., Kasemets K., Ivask A., Käkinen A., Kurvet I., Bondarenko O., Kanarbik L., Sihtmäe M., Aruoja V., Schvede H. and Kahru A.: Environmental hazard of oil shale combustion fly ash, J. Hazard. Mater., 2012, 229–230, 192–200.
- World Energy Council: ‘Survey of energy resource’, 2007. http://www.worldenergy.org/.
- Ots A.: Oil shale as a power fuel, Oil Shale, 2006, 22, 367–368.
- Gorokhovsky A. V., Gorokhovsky V. A., Mescheryakov D. V., Mendez-Nonell J., Escalante-Garcia J. I., Pech-Canul M. I. and Vargas-Gutierrez G.: Inorganic wastes in manufacturing of glass-ceramics: slurry of phosphorous fertilizer production and oil shale ash, Mater. Lett., 2001, 51, 281–284.
- Gorokhovskii A. V., Gorokhovskii V. A., Mescheryakov D. V. and Kopchekchi A. A.: Glass-ceramics based on oil shale ash. Glass Ceram., 2002, 59, 191–193.
- Gorokhovsky A. V., Escalante-Garcia J. I., Mendez-Nonell J., Gorokhovsky V. A. and Mescheryakov D. V.: Foamed glass-ceramic materials based on oil shale by-products. Glass Sci. Technol., 2002, 75, 259–262.
- Luan J., Li A., Su T. and Cui X.: Synthesis of nucleated glass-ceramics using oil shale fly ash. J. Hazard. Mater., 2010, 173, 427–432.
- Höland W. and Beall G.: ‘Glass-ceramic technology’; 2002, Westerville, OH, The American Ceramic Society.
- Hreglich S. and Cioffi F.: Continuous glass fibres from waste and their application in reinforced materials. Adv. Appl. Ceram., 2009, 108, 22–26.
- Fernandes H. R., Tulyaganov D. U. and Ferreira J. M. F.: Production and characterisation of glass ceramic foams from recycled raw materials, Adv. Appl. Ceram., 2009, 108, 9–13.
- Vasilopoulos K. C., Tulyaganov D. U., Agathopoulos S., Karakassides M. A., Ribeiro M., Ferreira J. M. F. and Tsipas D.: Vitrification of low silica fly ash: Suitability of resulting glass ceramics for architectural or electrical insulator applications. Adv. Appl. Ceram., 2009, 108, 27–32.
- Bernardo E., Pontikes Y. and Angelopoulos G. N.: Optimisation of low temperature sinter crystallisation of waste derived glass. Adv. Appl. Ceram., 2012, 108, 472–478.
- Bernardo E.: Fast sinter-crystallization of a glass from waste materials. J. Non-Cryst. Solids, 2008, 354, 3486–3490.
- Gutzow I., Pascova R., Karamanov A. and Schmelzer J.: The kinetics of surface induced sinter-crystallization and the formation of glass-ceramic materials. J. Mater. Sci., 1998, 33, 5265–5273.
- Karamanov A.: Granite like materials from hazardous wastes obtained by sintercrystallisation of glass frits. Adv. Appl. Ceram., 2009, 108, 14–21.
- Kuusik R., Uibu M. and Kirsimäe K.: Characterization of oil shale ashes formed at industrial-scale CFBC boilers. Oil Shale, 2005, 22, 407–419.
- Barsoum M. W.: ‘Fundamentals of ceramics’; 2003, London, Institute of Physics.
- Rasband W. S.: ImageJ, 1997–2011, US National Institutes of Health, Bethesda, MA, USA. http://imagej.nih.gov/ij/
- “Manual sampling and preparation and analysis of eluates” UNI 10802, 2004. “Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)” UNI EN 12457-2, 2004.
- Bernardo E.: Fast sinter-crystallization of a glass from waste materials. J. Non-Cryst. Solids, 2008, 354, 3486–3490.
- Bernardo E., Scarinci G., Edme E., Michon U. and Planty N.: Fast Sintered Gehlenite Glass-Ceramics from Plasma-Vitrified Municipal Solid Waste Incinerator Fly Ashes. J. Am. Ceram. Soc., 2009, 92, 528–530.
- Bernardo E. and Scarinci G.: Fast sinter crystallisation of waste glasses. Adv. Appl. Ceram., 2008, 107, 344–349.
- Ring T. A.: ‘Fundamentals of ceramic powder processing and synthesis’; 1996, San Diego, CA, Academic Press.
- Shackelford J. F. and Doremus R. H.: ‘Ceramic and glass materials’; 2010, New York, Springer.
- Bernardo E., Bonomo E. and Dattoli A.: Optimisation of sintered glass-ceramics from an industrial waster glass. Ceram. Int., 2010, 36, 1675–1680.
- Han S., Kim C. and Kwon D.: Thermal/oxidative degradation and stabilization of polyethylene glycol, Polymer, 1997, 38, 317–323.
- Chen X., Chadwick T. C., Wilson R. M., Hill R. G. and Cattell M. J.: Crystallization and flexural strength optimization of fine-grained leucite glass-ceramics for dentistry, Dent. Mater., 2011, 27, 1153–1161.
- Quinn G. D.: Weibull Strength Scaling for Standardized Rectangular Flexure Specimens. J. Am. Ceram. Soc., 2003, 86, 508–10.
- ‘Ceramic tiles – Part 4: determination of modulus of rupture and breaking strength’, ISO 10545-4:2004, ISO, Geneva, Switzerland, 2004.
- ‘Criteria for acceptance of waste at landfills according to Italian regulation’, D. M. 28 September 2010.
- Bernardo E. and Dal Maschio R.: Glass-ceramics from vitrified sewage sludge pyrolysis residues and recycled glasses, Waste Manage., 2011, 31, 2245–2252.