Low temperature synthesis of nano Ti(C,N) by novel mechanical and thermal activation method

References

• Sánchez J. M., Alvarez M., Rodriguez N. and Aristizabal M.: ‘Effect of Ni powder characteristics on the consolidation of ultrafine TiMoCN cermets by means of SPS and HIP technologies’, Mater. Sci. Eng. A, 2009, A500, 225–232.
   Google Scholar
• Xu Q. Z., Ai X., Zhao J., Qin W. Z., Wang Y. T. and Gong F.: ‘Comparison of Ti(C,N)-based cermets processed by hot-pressing sintering and conventional pressureless sintering’, J. Alloys Compd, 2015, 619, 538–543.
   Web of Science ®Google Scholar
• Jung J. and Kang S.: ‘Effect of ultra–fine powders on the microstructure of Ti(CN)–xWC–Ni cermets’, Acta Mater., 2004, 52, 1379–1386.
   Web of Science ®Google Scholar
• Lee D. W., Yu J. H., Yun J. Y., Kim Y. J., Turaey F. R. and Kim S. J.: ‘Metallathermic synthesis and consolidation of ultrafine TiCN particles’, J. Ceram. Process Res., 2009, 10, 212–215.
   Web of Science ®Google Scholar
• Zgalat-Lozynskyy O., Herrmann M. and Ragulya A.: ‘Spark plasma sintering of TiCN nanopowders in non-linear heating and loading regimes’, J. Eur. Ceram. Soc., 2011, 31, 809–813.
   Web of Science ®Google Scholar
• Archana M. S., Srikanth V. V. S. S., Joshi S. V. and Joardar J.: ‘Influence of applied pressure during field-assisted sintering of Ti(C,N)–WC–FeAl based nanocomposite’, Ceram. Int., 2015, 41, 1986–1993.
   Web of Science ®Google Scholar
• Monteverde F., Medri V. and Bellosi A.: ‘Synthesis of ultrafine titanium carbonitride powders’, Appl. Organomet. Chem., 2001, 15, 421–429.
   Web of Science ®Google Scholar
• Leparoux M., Kihn Y., Paris S. and Schreuders C.: ‘Microstructure analysis of RF plasma synthesized TiCN nanopowders’, Int. J. Refract. Metal Hard Mater., 2008, 26, 277–285.
   Web of Science ®Google Scholar
• Xiang J. H., Xie Z. P., Huang Y. and Xiao H. N.: ‘Synthesis of Ti(C,N) ultrafine powders by carbothermal reduction of TiO2 derived from sol–gel process’, J. Eur. Ceram. Soc., 2000, 20, 933–938.
   Web of Science ®Google Scholar
• Shen G. Z., Tang K. B., An C. H., Yang Q., Wang C. R. and Qian Y. T.: ‘Qian. A simple route to prepare nanocrystalline titanium carbonitride’, Mater. Res. Bull., 2002, 37, 1207–1211.
   Web of Science ®Google Scholar
• Lichtenberger O., Pippel E., Woltersdorf J. and Riedel R.: ‘Formation of nanocrystalline titanium carbonitride by pyrolysis of poly(titanylcarbodiimide)’, Mater. Chem. Phys., 2003, 81, 195–201.
   Web of Science ®Google Scholar
• Yuan Q., Zheng Y. and Yu H. Z.: ‘Rapid synthesis of Ti(C,N) powders by mechanical alloying and subsequent arc discharging’, Trans. Nonferrous Met. Soc. China, 2011, 21, 1545–1549.
   Web of Science ®Google Scholar
• Bhaskar U. K. and Pradhan S. K.: ‘One–step mechanosynthesis of nano structured Ti(CxN1 − x) cermets at room temperature and their microstructure characterization’, Mater. Chem. Phys., 2012, 134, 1088–1096.
   Web of Science ®Google Scholar
• Chicardi E., Córdoba J. M., Sayagués M. J. and Gotor F. J.: ‘Inverse core–rim microstructure in (Ti,Ta)(C,N)-based cermets developed by a mechanically induced self–sustaining reaction’, Int. J. Refract. Metal Hard Mater., 2012, 31, 39–46.
   Web of Science ®Google Scholar
• Xiang D. P., Liu Y., Tu M. J., Li Y. Y. and Chen W. P.: ‘Synthesis of nano Ti(C,N) powder by mechanical activation and subsequent carbothermal reduction–nitridation reaction’, Int. J. Refract. Metal Hard Mater., 2009, 27, 111–114.
   Web of Science ®Google Scholar
• Xiang D. P.: ‘Applied fundamental research on preparation of Ti(C,N) based oncarbothermal reduction–nitridation of nano–TiO2’. PhD thesis, Sichuan University, Chengdu, China, 2007..
   Google Scholar
• Klug H. P. and Alexander L. E.: ‘X-ray diffraction procedures for polycrystalline and amorphous materials’; 1954, London, John Wiley & Sons, Inc.
   Google Scholar
• Xiang D. P., Liu Y., Zhao Z. W., Cao H., Gao S. J. and Tu M. J.: ‘Reaction sequences and influence factors during preparation Ti(C,N) powders’, J. Alloys Compd, 2007, 429, 264–269.
   Web of Science ®Google Scholar
• Jha A. and Yoon S. J.: ‘Formation of titanium carbonitride phases via the reduction of TiO2 with carbon in the presence of nitrogen’, J. Mater. Sci., 1999, 34, 307–322.
   Web of Science ®Google Scholar