996
Views
6
CrossRef citations to date
0
Altmetric
RESEARCH PAPER

Glass optical fibre sensors for detection of through thickness moisture diffusion in glass reinforced composites under hostile environments

, , , , , , , , & show all
Pages S76-S83 | Received 27 Feb 2015, Accepted 27 May 2015, Published online: 14 Jul 2015

References

  • RH Martin: ‘Degradation of polymer matrix composites’ Vol. 3, ‘Shreir's corrosion’ 2387–2406; 2010, Amsterdam, Elsevier.
  • M. E. Hossain: ‘The current and future trends of composite materials: an experimental study’, J. Comp. Mater., 2011, 45, (20), 2133–2144.
  • K. Nali: ‘Avoiding internal corrosion with glass reinforced plastic’, Pipeline Gas J., 2012, 239, (3), 1–3.
  • A. M. Maffezzoli, L. Peterson, J. C. Seferis, J. Kenny and L. Nicolais: ‘Dielectric characterization of water sorption in epoxy resin matrices’, Polym. Eng. Sci., 1993, 33, (2), 75–82.
  • M. Majumder, T. K. Gangopadhyay, A. K. Chakraborty, K. Dasgupta and D. K. Bhattacharya: ‘Fibre Bragg gratings in structural health monitoring—Present status and applications’, Sens. Actuators A Phys., 2008, 147, 150–164.
  • H Tsuda and J-R Lee: ‘Strain and damage monitoring of CFRP in impact loading using a fiber Bragg grating sensor system’, Compos. Sci. Technol., 2007, 67, 1353–1361.
  • Y. J. Yan and L. H. Yam: ‘Online detection of crack damage in composite plates using embedded piezoelectric actuators/sensors and wavelet analysis’, Compos. Struct., 2002, 58, 29–38.
  • T Loutas and V Kostopoulos: ‘Health monitoring of carbon/carbon, woven reinforced composites. Damage assessment by using advanced signal processing techniques. Part I. Acoustic emission monitoring and damage mechanisms evolution’, Compos. Sci. Technol., 2009, 69, 265–272.
  • T. J. Swait, A. Rauf, R. Grainger, P. B. S. Bailey, A. D. Lafferty, E. J. Fleet, R. J. Hand and S. A. Hayes: ‘Smart composite materials for self-sensing and self-healing’, Plast. Rubber Compos., 2012, 41, 215–224.
  • K. S. C. Kuang, R. Kenny, M. P. Whelan, W. J. Cantwell and P. R. Chalker: ‘Embedded fibre Bragg grating sensors in advanced composite materials’, Compos. Sci. Technol., 2001, 61, 1379–1387.
  • A. Papantoniou, G. Rigas and N. D. Alexopoulos: ‘Assessment of the strain monitoring reliability of fiber Bragg grating sensor (FBGs) in advanced composite structures’, Compos. Struct., 2011, 93, 2163–2172.
  • DA Krohn: ‘Fiber optic sensors: fundamentals and applications’, 3rd edn, ‘ Research Triangle Park, NC, Instrumentation, Systems and Automation Society’., 109–154; 2000.
  • Y-J. Rao: ‘Recent progress in fiber-optic extrinsic Fabry–Perot interferometric sensors’, Opt. Fiber Technol., 2006, 12, 227–237.
  • O. S. Wolfbeis: ‘Fiber-optic chemical sensors and biosensors’, Anal. Chem., 2004, 76, 3269–3283.
  • C. McDonagh, C. S. Burke and B. D. MacCraith: ‘Optical chemical sensors’, Chem. Rev., 2008, 108, 400–422.
  • A Neri, M Parvis, G Perrone, S Grassini, E Angelini and D Mombello: ‘Low-cost fiber optic H2S gas sensor, 2008 IEEE Sensors’, IEEE, 2008, 313–316.
  • U. Willer, D. Scheel, I. Kostjucenko, C. Bohling, W. Schade and E. Faber: ‘Fiber-optic evanescent-field laser sensor for in-situ gas diagnostics’, Spectrochim. Acta Mol. Biomol. Spectrosc., 2002, 58, 2427–2432.
  • RS Mahendran, VR Machavaram, L Wang, JM Burns, D Harris, SN Kukureka and F Fernando: ‘Proc. SPIE 7293, Smart Sensor Phenomena, Technology, Networks, and Systems 2009’, 2009, 72930C–9.
  • MJ Lodeiro, T Young and MRL Gower: ‘Feasibility of moisture and humidity determination using optical fibre sensing in polymer matrix composites’, ‘ NPL Report MN 11’; 2013.
  • LP Canal, R Sarfaraz, G Violakis, V Michaud, J Botsis and HG Limberger: ‘Experimental and numerical study of the moisture diffusion in adhesive composite joints’, ‘ Proc. 16th Europena Conference on Composite Materials (ECCM-16), Seville, Spain, 22–26 June 2014, Paper 456’
  • TJ Young, MJ Lodeiro, MRL Gower and MB Sassi: ‘Systematic approach for the calibration of humidity sensitive polyimide recoated fibre Bragg gratings for measuring humidity and temperature and their application for measuring moisture absorption in polymers’, Meas. Sci. Technol., 2013, 24, 085101.
  • A. Armin, M. Soltanolkotabi and P. Feizollah: ‘On the pH and concentration response of an evanescent field absorption sensor using a coiled-shape plastic optical fiber’, Sens. Actuators A Phys., 2011, 165, 181–184.
  • S. K. Khijwania and B. D. Gupta: ‘Fiber optic evanescent field absorption sensor: effect of fiber parameters and geometry of the probe’, Opt. Quantum Electron., 1999, 31, 625–636.
  • C. L. Linslal, P. M. Syam Mohan, A. Halder and T. K. Gangopadhyay: ‘Analysis and modeling of an optical fiber loop resonator and an evanescent field absorption sensor for the application for chemical detection’, Sens. Actuators A Phys., 2013, 194, 160–168.
  • B. Lee: ‘Review of the present status of optical fiber sensors’, Opt. Fiber Technol., 2003, 9, 57–79.
  • ASTM D1141 - 98(2013) Standard Practice for the Preparation of Substitute Ocean Water.
  • B Milsom, M Olivero, D Milanese, M Roseman, S Giannis, R Martin, A Terenzi and M Ferraris: ‘Development and integration of innovative glass fibre sensors into advanced composites for applications in hostile environments’, Proc. 16th European Conference on Composite Materials (ECCM-16), Seville, Spain, 22–26 June 2014, Paper 611.