The Application of Fracture Mechanics to The Safety Assessment of Transport Casks For Radioactive Materials

REFERENCES

• International Atomic Energy Agency (IAEA). Regulations for the safe transport of radioactive material, 1996 edition (revised). Safety Standards Series No. TS-R-1 (Vienna: IAEA) (2000 ) ISBN 92–0–100500–8.
   Google Scholar
• Wieser, K. E., Droste, B., Helms, R., Ziebs, J. and Hemptenmacher, J. Gußeisen mit Kugelgraphit als Werkstoff für Transport- und Lagerbehälter bestrahlter Brennelemente. Amts- und Mitteilungsblatt BAM 15(1), 4–18 (1985).
   Google Scholar
• Aurich, D., Helms, R. and Wieser, K. Das sicherheitstechnische Konzept der BAM für SpharoguSbehalter. Amts- und Mitteilungsblatt BAM 17(4), 657–663 (1987).
   Google Scholar
• International Atomic Energy Agency (IAEA) Advisory material for the IAEA regulations for the safe transport of radioactive material. Draft Safe Transport IAEA Safety Guide TS-G-1.1 (ST-2) (Vienna: IAEA) (2002).
   Google Scholar
• Rehmer, B., Kühn, H., Weidlich, S. and Frenz, H. BAM production control programme for containers for transport and storage of nuclear materials. Int. J. Radioact. Mater. Transport (RAMTRANS) 6(2–3), 205–209 (1995).
   Google Scholar
• Federal Institute for Materials Research and Testing (BAM). Leitlinie zur Verwendung von Gusseisen mit Kugelgraphit für Transport- und Lagerbehälter für radioaktive Stoffe [Guidelines for the application of ductile cast iron for transport and storage casks for radioactive materials]. GGR 007 (Berlin: BAM) (2002 ). (Available at: http://www.bam.de/pdf/service/amtl_mitteilungen/gefahrgutrecht/regeln/ggr-007deu.pdf (in German).)
   Google Scholar
• Zencker, U., Volzke, H. and Droste, B. Entwicklung von Beurteilungsmethoden fur Transport- und Lagerbehälter mit erhöhten metallischen Reststoffanteilen (EBER). BMBF Research Project 02 S 7584, Final Report (Berlin: BAM) (1998 ). (Also published as BAM Research Report 240, ISBN 3–89701–523–4 (2001).)
   Google Scholar
• Federal Institute for Materials Research and Testing (BAM). Richtlinie für numerisch geführte Sicherheitsnachweise im Rahmen der Bauartprüfung von Transport- und Lagerbehältern für radioaktive Stoffe [Guidelines for the numerical safety analyses for the approval of transport and storage casks for radioactive materials ]. GGR 008 (Berlin: BAM) (2003 ). (Available at: http://www.bam.de/pdf/service/amtl_mitteilungen/gefahrgutrecht/regeln/ggr-008deu.pdf (in German).)
   Google Scholar
• Pusch, G., Udoh, A. and Rose, K. Einfluß von Temperatur und Beanspruchungsgeschwindigkeit auf die mechanischen Eigenschaften von GGG-40. Konstruieren + Gießen 22(1), 12–16 (1997).
   Google Scholar
• Kussmaul, K., Silcher, H. and Eisele, U. On the use of elastic-plastic material characteristics for linear-elastic component assessments. Int. J. Radioact. Mater. Transport (RAMTRANS) 6(2–3), 165–169 (1995).
   Google Scholar
• American Society for Testing and Materials. ASTM E 399–90 (reapproved 1997), standard test method for plane-strain fracture toughness of metallic materials. In: Annual Book of ASTM Standards, Section 3, Vol. 03.01 (Philadelphia, PA: ASTM) (2003).
   Google Scholar
• European Structural Integrity Society. ESIS P2–92, ESIS Procedure for Determining the Fracture Resistance of Ductile Materials, ESIS (1992). (Obtainable from: Professor K.-H. Schwalbe, GKSS-Forschungszentrum Geesthacht, 21502 Geesthacht, Germany.)
   Google Scholar
• American Society for Testing and Materials. ASTM E 1820–01, standard test method for measurement of fracture toughness. In: Annual Book of ASTM Standards, Section 3, Vol. 03.01 (Philadelphia, PA: ASTM) (2003).
   Google Scholar
• McConnell, P. Dynamic fracture toughness of ductile iron. In: Rapid Load Fracture Testing, ASTM STP 1130, Chona, R. and Corwin, W. R., Eds. (Philadelphia, PA: ASTM ) pp. 104–117 (1991).
   Google Scholar
• Zencker, U. and Müller, K. Modern safety assessment of cubic cast iron containers under mechanical impact. In: Proceedings of the 17th International Conference on Structural Mechanics in Reactor Technology (SMiRT 17), Prague, 17–22 August 2003 (CD-ROM) (2003). (To be published in Nucl. Eng. Design.)
   Google Scholar
• Müller, K., Schriever, S., Wossidlo, P., Hamann, A. and Lowe, P. Bruchmechanische Untersuchungen von Gusseisen mit Kugelgraphit bei Stoß- und Schlagbiege-Beanspruchung. DVM Report 233 (33. Tagung des DVM-AK Bruchvorgange, 20./ 21.02.2001, Paderborn), (Berlin: DVM ) pp. 267–274 (2001).
   Google Scholar
• Müller, K., Wossidlo, P. and Baer, W. Fracture toughness behaviour of thick-walled nodular cast iron at elevated loading rates. In: Transferability of Fracture Mechanical Characteristics, NATO Science Series II, Vol. 78, Dlouhy, I., Ed. (Dordrecht: Kluwer Academic Publishers ), pp. 283–290 (2002).
   Google Scholar