Natural convection/radiation heat transfer simulations of enclosed array of vertical rods

References

• US Department of Energy, Office of Civilian Radioactive Waste Management (OCRWM): ‘Characteristics of spent nuclear fuel,high-level waste, and other radioactive wastes which may require long-term isolation’, DOE/RW-0184, 1987.
   Google Scholar
• J. H. Saling and A. W. Fentiman: ‘Radioactive waste management’, 2nd edn, 2001, New York, NY, Taylor and Francis.
   Google Scholar
• NRC: ‘Cladding considerations for the transportation and storage of spent fuel’, Interim Staff Guidance Report for the Spent Fuel Project Office of the US NRC, ISG-11 R3, 2005, available at: www.nrc.gov
   Google Scholar
• General Atomics (GA): ‘GA-4 legal weight truck from-reactor spent fuel shipping cask, safety analysis report for packaging (SARP)’, San Diego, CA, USA, 92186–5608, 1998.
   Google Scholar
• Office of Civilian Radioactive Waste Management (OCRWM), US Department of Energy: ‘Multi-purpose canister (MPC) implementation program conceptual design phase report’, DOC ID A20000000–00811, 1993.
   Google Scholar
• M. Greiner, K. K. Gangadharan and M. Gudipati: ‘Use of fuel assembly/backfill gas effective thermal conductivity models to predict basket and fuel cladding temperatures within a rail package during normal transport’, Nuclear Technol., 2007, 160, 325–336.
   Web of Science ®Google Scholar
• R. Unterzuber, R. D. Milnes, B. A. Marinkovich and G. M. Kubancsek: ‘Spent-fuel dry-storage testing at E-MAD (March 1978 through March 1982)’, prepared for the US DOE Commercial Spent Fuel Management Program Office at the Pacific Northwest Laboratory, B-D3339-A-G, 1982.
   Google Scholar
• R. D. Manteufel and N. E. Todreas: ‘Effective thermal conductivity and edge conductance model for a spent-fuel assembly’, Nuclear Technol., 1994, 105, 421–440.
   Web of Science ®Google Scholar
• R. H. Bahney and T. L. Lotz: ‘Spent nuclear fuel effective thermal conductivity report’, US DOE, Yucca Mountain Site Characterization Project Office, DI BBA000000–01717–5705- 00010 REV 00, 1996.
   Google Scholar
• P. E. A. Gomez and M. Greiner: ‘2D natural convection and radiation heat transfer simulations of a PWR fuel assembly within a constant temperature support structure PVP2006-ICPVT-11- 93332’, Proc. PVP2006-ICPVT-11, 2006 ASME Pres. Ves. Pip. Div. Conf., Vancouver, BC, Canada, July 2006, ASME.
   Google Scholar
• P. E. Araya and M. Greiner: ‘Use of regular rod arrays to model heat transfer from BWR fuel assemblies inside transport casks’, Packag., Transp., Stor. Secur. Radioact. Mater., 2007, 18, 171–179.
   Google Scholar
• V. V. R. Venigalla and M. Greiner: ‘CFD simulations of natural convection/radiation heat transfer within the fuel regions of a truck cask for normal transport’, PVP2007–26242, Proc. 2007 ASME Pres. Ves. Pip. Div. Conf., July 2007, San Antonio, TX, USA, ASME.
   Google Scholar
• M. Gudipati and M. Greiner: ‘CFD simulations of fuel cladding and basket surface temperatures in an MPC rail cask during normal transport’, Proc. 15th Int. Symp. on ‘Packaging and transportation of radioactive materials (PATRAM)’, Miami, FL, USA, October 2007, Institute of Nuclear Materials Management.
   Google Scholar
• P. M. Lovett: ‘An experiment to simulate the heat transfer properties of a dry, horizontal spent nuclear fuel assembly’, MS thesis, Nuclear Eng., Massachusetts Institute of Technology, MA, USA, 1991.
   Google Scholar
• P. E. A. Gomez and M. Greiner: ‘Benchmark natural convection/ radiation simulations within an enclosed array of horizontal heat rods’, PVP2006-ICPVT-11–94021, Proc. PVP2006-ICPVT-11, 2006 ASME Pres. Ves. Pip. Div. Conf., Vancouver, BC, Canada, July 2006, ASME.
   Google Scholar
• S. Arya: ‘Convective heat transfer in a sealed vertical storage cask containing spent fuel canisters’, MS thesis, Mechanical Engineering Department, University of Tennessee, Knoxville, TN, USA, 1990.
   Google Scholar
• S. Arya and M. Keyhani: ‘Convective heat transfer in a sealed vertical storage cask containing spent fuel canisters’, Nuclear Sci. Eng., 1990, 105, 391–403.
   Web of Science ®Google Scholar
• US Department of Energy, Richland Operations Office: ‘Integral monitored retrievable storage (MRS) facility-conceptual design report’, prepared by The Ralph M. Parsons Company of Delaware, Westinghouse Electric Corporation, and Golden Associates, Report No. MRS 11, contract no. DE-AC06–84RL 10436, 1985.
   Google Scholar
• B. A. Hands and V. D. Arp: ‘A correlation of thermal conductivity data for helium’, Cryogenics, 1981, 21, 697–703, available at http://webbook.nist.gov/chemistry/fluid/, as of 04-10-2006.
   Web of Science ®Google Scholar
• R. D. McCarty and V. D. Arp: ‘A new wide range equation of state for helium’, Adv. Cryo. Eng., 1990, 35, 1465–1475, available at http://webbook.nist.gov/chemistry/fluid/, as of 04-10-2006.
   Google Scholar
• V. D. Arp, R. D. McCarty and D. G. Friend: ‘Thermophysical properties of helium-4 from 0–8 to 1500 K with pressures to 2000 MPa’, Technical Note 1334, National Institute of Standards and Technology, Boulder, 1998, available at: http://webbook.nist.gov/chemistry/fluid/, as of 04-10-2006.
   Google Scholar