References
- General Atomics (GA): ‘GA-4 legal weight truck from-reactor spent fuel shipping cask, safety analysis report for packaging (SARP)’, San Diego, CA, USA, 1998.
- Office of Civilian Radioactive Waste Management (OCRWM), US Department of Energy: ‘Multi-purpose canister (MPC) implementation program conceptual design phase report’, DOC ID A20000000–00811, 1993.
- US Department of Energy: ‘Characteristics of spent nuclear fuel, high-level waste, and other radioactive wastes which may require long-term isolation’, Office of Civilian Radioactive Waste Management, DOE/RW-0184, 1987.
- Nuclear Regulatory Commission (NRC): ‘Cladding considerations for the transportation and storage of spent fuel’, Interim Staff Guidance Report for the Spent Fuel Project Office of the US, ISG- 11 Rev. 3, 2005, available at www.nrc.gov
- M. Greiner, K. K. Gangadharan and M. Gudipati: ‘Use of fuel assembly/backfill gas effective thermal conductivity models to predict basket and fuel cladding temperatures within a rail package during normal transport’, Nuclear Technology, 2007, 160, 325–336.
- R. Unterzuber, R. D. Milnes, B. A. Marinkovich and G. M. Kubancsek: ‘Spent-fuel dry-storage testing at EMAD (March 1978 through March 1982)’, Prepared for the US DOE Commercial Spent Fuel Management Program Office at the Pacific Northwest Laboratory, B-D3339-A-G, 1982.
- R. D. Manteufel and N. E. Todreas: Nucl. Technol., 1994, 105, 421–440.
- R. H. Bahney and T. L. Lotz: ‘Spent nuclear fuel effective thermal conductivity report’, prepared for the US DOE, Yucca Mountain Site Characterization Project Office by TRW Environmental Safety Systems, Inc., DI: BBA000000-01717-5705-00010 REV 00, 1996.
- V. V. R. Venigalla and M. Greiner: Proc. ASME Pressure Vessels and Piping Division Conference, San Antonio, TX, USA, July 2007,, ASME, PVP2007–26242.
- US Department of Energy Office of Civilian Radioactive Waste Management: ‘Transportation, aging and disposal canister system performance specification, revision 0’, DOC ID: WMO-TADCS- 000001, 2007.
- M. Gudipati: ‘Computational fluid dynamics simulations of basket and fuel cladding temperatures within a rail cask during normal transport’, MS thesis, University of Nevada, Reno, NV, USA, 2007.
- S. V. Patankar: ‘Numerical heat transfer and fluid flow’; 1980, New York, Hemisphere Publishing Corp.
- US Nuclear Regulatory Commission: ‘Packaging and transportation of radioactive material’, Rules and Regulations, Title 10, Part 71, Code of Federal Regulations, 1992.
- F. P. Incropera and D. P. DeWitt: ‘Introduction to heat transfer’, 3rd edn; 1996, New York, John Wiley and Sons.
- P. M. Teertstra, M. M. Yovanovich and J. R. Culham: Proc. 38th Thermophysics Conference, Toronto, Ontario, Canada, June 2005, AIAA, Paper No. 2005–4685.