Evolution of carbide precipitates in 2½Cr–1Mo steels in power industry: morphology and stability, and characterisation techniques

References

• H. K. D. H. Bhadeshia, A. Strang and D. J. Gooch: Terrific power plant steels: remanent life assessment and approach to equilibrium', Int. Mater. Rev., 1998, 43, (2), 45–68.
   Web of Science ®Google Scholar
• J. C. M. Farrar: 'The alloy tree — a guide to low-alloy steels, stainless steels and nickel-base alloys', 192; 2004, Cambridge, Woodhead Publishing Limited.
   Google Scholar
• R. Viswanathan: 'Damage mechanisms and life assessment of high-temperature components', Chap. 5 and 8, 183–264, 383–414, 1989; 2006, Materials Park, OH, ASM International.
   Google Scholar
• S. Chaudhuri: 'Some aspects of metallurgical assessment of boiler tubes — basic principles and case studies', Mater. Set Eng. A, 2006, A432, 90–99.
   Web of Science ®Google Scholar
• R. Viswanathan, K. Coleman and U. Rao: 'Materials for ultra-supercritical coal-fired power plant boilers', Int. J. Press. Vessel Pip., 2006, 83, 778–783.
   Web of Science ®Google Scholar
• H. K. D. H. Bhadeshia: `Microstructural stability of strong 9–12 wt% Cr steels,' Proc. Conf. on 'Super-high strength steels', Rome, Italy, November 2005, Associazione Italian di Metallurgica, 1–10.
   Google Scholar
• E. Letofsky and H. Cerjak: `Metallography of 9Cr steel power plant weld microstructures' Science & Technology of Welding & Joining, 2004, 9, 31–36.
   Web of Science ®Google Scholar
• N. Fujita and H. K. D.H. Bhadeshia: 'Advanced heat resistant steels for power generation', 223–233; 1998, San Sebastian, The Institute of Materials.
   Google Scholar
• H. K. D. H. Bhadeshia: 'Design of ferritic creep-resistant steels', in 'Trends in welding research', (ed. S. A. David, et al), 795–804; 1999, Materials Park, OH, ASM International.
   Google Scholar
• J. M. Race and H. K. D. H. Bhadeshia: 'Precipitation sequences during carburisation of Cr—Mo steel', Mater. Sci. Technol, 1992, 8, 875–882.
   Web of Science ®Google Scholar
• J. D. Robson and H. K. D. H. Bhadeshia: 'Kinetics of precipitation in power plant steels', Calphad, 1996, 20, (4), 447–460.
   Web of Science ®Google Scholar
• J. D. Robson and H. K. D. H. Bhadeshia: 'Modelling precipitation sequences in power plant steels. Part 1 — kinetic theory', Mater. Sci. Technol, 1997, 13, 631–639.
   Web of Science ®Google Scholar
• J. D. Robson and H. K. D. H. Bhadeshia: 'Modelling precipitation sequences in power plant steels. Part 2 — application of kinetic theory', Mater. Sci. Technol, 1997, 13, 640–644.
   Web of Science ®Google Scholar
• R. C. Thomson and H. K. D. H. Bhadeshia: 'Changes in chemical composition of carbides in 2-25Cr—lMo power plant steel. Part 1 — bainitic microstructure', Mater. Sci. Technol, 1994, 10, 193–203.
   Web of Science ®Google Scholar
• R. C. Thomson and H.K. D. H. Bhadeshia: 'Changes in chemical composition of carbides in 2-25Cr—lMo power plant steel. Part 2: mixed microstructure', Mater. Sci. Technol, 1994, 10, 205–208.
   Web of Science ®Google Scholar
• R. G. Baker and J. Nutting: 'The tempering of 21/4Cr-1Mo steel after quenching and normalizing', J. Iron Steel Inst., 1959, 192, 257–269.
   Google Scholar
• J. Yu: 'Carbide stability diagrams in 2-25Cr-1Mo steels', Metall Trans. A, 1989, 20A, 1561–1564.
   Web of Science ®Google Scholar
• R. C. Yang, Z. Li and K. Chen: 'Research on physical significance of the Larson—Miller parameter and its electron theory for heat-resistant steels', Key Eng. Mater., 2007, 353–358, 477–480.
   Google Scholar
• R. Viswanathan, J. R. Foulds and D. A. Roberts: 'Methods for estimating the temperature of reheater and superheater tubes in fossil boiler', Proc. Int. Conf. on 'Life extension and assessment', The Hague, The Netherlands, June 1988, Nederlands Instituut voor Lastechniek.
   Google Scholar
• R. Coade: 'Temperature determination based on microstructural changes occurring in 1%Cr-0.5%Mo steel', report no. SO/85/87, State Electricity Commission of Victoria, Melbourne, Australia, 1985.
   Google Scholar
• G. Vander Voort, E. Manilova and J. R. Michael: 'A study of selective etching of carbides in steel', 'Advances in instrumentation and techniques — metallography: preparation, application and evaluation for the 21st century', Proc. Conf. on 'Microscopy and microanalysis', Savannah, GA, USA, August 2004, Cambridge University Press.
   Google Scholar
• G. Vander Voort, E. Manilova and J. R. Michael and G. Lucas: 'Study of selective etching of carbides in steel', 2004, available at: http://www.dgm.de/past/2004/metallographie/download/686_60.pdf
   Google Scholar
• A. K. Ray, Y. N. Tiwari, P. K. Roy, S. Chaudhuri, S. C. Bose, R. N. Ghosha and J. D. Whittenberger: 'Creep rupture analysis and remaining life assessment of 2.25Cr—lMo steel tubes from a thermal power plant', Mater. Sei. Eng. A, 2007, A454—A455, 679–684.
   Web of Science ®Google Scholar
• V. A. Biss and T. Wada: `Microstructural changes in 1Cr-0.5Mo steel after 20 years of service', Metall Trans. A, 1985, 16A, 109–114.
   Web of Science ®Google Scholar