References
- Arivazhagan B, Prabhu R, Albert SK, Kamaraj M, Sundaresan S: ‘Microstructure and mechanical properties of 9Cr-1Mo steel weld fusion zones as a function of weld metal composition’, ASM International, July 2008.
- Czyrska-Filemonowicz A, Aielinska-Lipiec, Ennis PJ: ‘Modified 9% Cr steels for advanced power generation: microstructure and properties’, J. Achiev. Mater. Manuf. Eng., 2006, 19, (2), 43–48.
- Kang HG, Bae SY: ‘Fatigue crack growth rate in low ΔK range according to the microstructure and temperature in P122 alloy steel’, Graduate School of Mechanical Engineering, Sungkyunkwan University, Korea, 2006.
- Kenji H, Tomoya K, Takao O, Rinsei I, Kotaro H: ‘Steel products for construction, industrial machinery and plant’, JFE Technical Report no. 2, 2004.
- Blume R, Leich KE, Heuser H, Meyer FW: Stainless Steel Europe, Apr. 1995, 49–53.
- Dittrich S, Gross V, Heuser H: Proc. Nat. Welding Seminar, Jamshedpur, 1994.
- Alto P: ‘Optimal hardness of P91 weldments’, CA:1004702, Electric Power Research Institute, EPRI, 2003.
- Sikka VK, Ward CT, Thomas KC: Proc. Int. Conf. on ‘Ferritic steels for high temperature applications’, (ed. , Khare A K, ed), 65–84; 1983, Metals Park, OH, ASM.
- Jones WB: Proc. Int. Conf. on ‘Ferritic steels for high temperature applications’, A. (ed. K. Khare), 116–130; 1983, Metals Park, OH, ASM.
- Jones WB, Hills CR, Polonis DH: Metall. Trans. A, 1991, 22A, 1049–1058.
- Panait C, Bendick W, Fuchsmann A, Gourgues F, Besson J: ‘Study of the microstructure of the Grade 91 steel after more than 100,000h of creep exposure at 600°C’, Int. J. Pressure Vessels Pip., 2010, 87, 326–335.
- Bhadeshia HKDH: ‘Design of ferritic creep resistant steel’, ISIJ Int., 2001, 41, (6), 626–640.
- Arivazhagan B, Srinivasan G, Albert SK, Bhaduri AK: ‘A study on influence of heat input variation on microstructure of reduced activation ferritic martensitic steel weld metal produced by GTAW process’, Fusion Eng. Des., 2011, 86, 192–197.
- KlasWeman: ‘Welding processes handbook’; 2003, New York, CRC Press LLC.
- Di Gianfrancesco A, Cipolla L, Cirilli F, Sviluppo C, Cumino G, Caminada S, Dalmine T: ‘Microstructural stability and creep data assessment of Tenaris grades 91 and 911’, Italy, 2005.
- Guntz G, Julien M, Kottmann G, Pellicani F, Pouilly A, Vaillant JC: ‘The T91 book’, Vallourec Industries, France, 1990.
- Maile K: ‘Evaluation of microstructural parameters in 9–12% Cr steels’, Int. J. Pressure Vessels Pip., 2007, 84, 62–68.
- Milovic L, Vuherer T, Zrilic M, Momcilovic D, Putic S: ‘Microstructural analysis of simulated heat affected zone in creep resisting steel’, Proc. 3rd Int. Conf. on ‘Deformation processing and structure of materials’, Belgrade, Serbia, September 2007, Association of Metallurgical Engineers of Serbia. Internet: http://elektron.tmf.bg.ac.rs/dpsm2007/articles.htm
- Abd El-Rahman M, El-koussy MR, El-Mahallawi I: ‘Influence of heat input and post-weld heat treatment on boiler steel P91 (9Cr-1Mo-V-Nb) weld joints, II. Mechanical properties’, Int. Heat Treat. Surf. Eng., 2013, 7, 32–37.