Effect of chromium powder suspended dielectric on surface roughness in PMEDM process

References

• Ojha K, Garg RK, Singh KK: ‘MRR improvement in sinking electrical discharge machining: a review’, J. Miner. Mater. Charact. Eng., 2010, 9, (8), 709–739.
   Google Scholar
• Garg RK, Singh KK, Sachdeva A, Sharma VS, Ojha K, Singh S: ‘Review of research work in sinking EDM and WEDM on metal matrix composite materials’, Int. J. Adv. Manuf. Technol., 2010, 50, (5–8), 611–624.
   Web of Science ®Google Scholar
• Lin YC, Wang AC, Wang DA, Chen CC: ‘Machining performance and optimizing machining parameters of Al2O3–TiC ceramics using EDM based on the Taguchi method’, Mater. Manuf. Processes, 2009, 24, (6), 667–674.
   Web of Science ®Google Scholar
• Abdulkareem S, Khan AA, Konneh M: ‘Cooling effect on electrode and process parameters in EDM’, Mater. Manuf. Processes, 2010, 25, (6), 462–466.
   Web of Science ®Google Scholar
• Somashekhar KP, Ramachandran N, Mathew J: ‘Optimization of material removal rate in micro-EDM using artificial neural network and genetic algorithms’, Mater. Manuf. Processes, 2010, 25, (6), 467–475.
   Web of Science ®Google Scholar
• Yeo SH, Aligiri E, Tan PC, Zerepour H: ‘A new pulse discriminating system for micro-EDM’, Mater. Manuf. Processes, 2009, 24, (12), 1297–1305.
   Web of Science ®Google Scholar
• Sarkar S, Ghosh K, Mitra S, Bhattacharyya B: ‘An integrated approach to optimization of WEDM combining single-pass and multipass cutting operation’, Mater. Manuf. Processes, 2010, 25, (8), 799–807.
   Web of Science ®Google Scholar
• Kansal HK, Singh S, Kumar P: ‘Technology and research developments in powder mixed electric discharge machining (PMEDM)’, J. Mater. Process. Technol., 2007, 184, (1–3), 32–41.
   Web of Science ®Google Scholar
• Kumar A, Maheshwari S, Sharma C, Beri N: ‘Research developments in additives mixed electrical discharge machining (AEDM): a state of art review’, Mater. Manuf. Processes, 2010, 25, (10), 1166–1180.
   Web of Science ®Google Scholar
• Cogun C, Ozerkan B, Karacay T: ‘An experimental investigation on the effect of powder mixed dielectric on machining performance in electrical discharge machining’, Proc. Inst. Mech. Eng. B: J. Eng. Manufact., 2006, 220, 1035–1050.
   Web of Science ®Google Scholar
• Kansal HK, Singh S, Kumar P: ‘Effect of silicon powder mixed EDM on machining rate of AISI D2 die steel’, J. Manuf. Processes, 2007, 9, (1), 13–22.
   Google Scholar
• Peças P, Henriques E: ‘Effect of the powder concentration and dielectric flow in the surface morphology in electrical discharge machining with powder-mixed dielectric (PMD-EDM)’, Int. J. Adv. Manuf. Technol., 2008, 37, 1120–1132.
   Web of Science ®Google Scholar
• Peças P, Henriques E: ‘Electrical discharge machining using simple and powder-mixed dielectric: the effect of the electrode area in the surface roughness and topography’, J. Mater. Process. Technol., 2008, 200, 250–258.
   Web of Science ®Google Scholar
• Prihandana GS, Mahardika M, Hamdi M, Wong YS, Mitsui K: ‘Effect of micro-powder suspension and ultrasonic vibration of dielectric fluid in micro-EDM processes – Taguchi approach’, Int. J. Mach. Tools Manuf., 2009, 49, 1035–1041.
   Web of Science ®Google Scholar
• Furutani K, Sato H, Suzuki M: ‘Influence of electrical conditions on performance of electrical discharge machining with powder suspended in working oil for titanium carbide deposition process’, Int. J. Adv. Manuf. Technol., 2009, 40, 1093–1101.
   Web of Science ®Google Scholar
• Kung KY, Horng JT, Chiang KT: ‘Material removal rate and electrode wear ratio study on the powder mixed electrical discharge machining of cobalt-bonded tungsten carbide’, Int. J. Adv. Manuf. Technol., 2009, 40, 95–104.
   Web of Science ®Google Scholar
• Ojha K, Garg RK, Singh KK: ‘The effect of nickel micro powder suspended dielectric on EDM performance measures of EN-19 steel’, J. Eng. Appl. Sci., 2011, 6, (1), 27–37.
   Google Scholar
• Shen B, Sun FH, Xue HG, Chen M, Zhang ZM: ‘Study on fabrication and cutting performance of high quality diamond coated PCB milling tools with complicated geometries’, Surf. Eng., 2009, 25, (1), 70–76.
   Web of Science ®Google Scholar
• Lesage J, Chicot D, Nosei L, Feugeas J: ‘Prediction of hardness–depth profile from indentations at surface of materials’, Surf. Eng., 2009, 25, (2), 93–96.
   Web of Science ®Google Scholar
• Guo RH, Jiang SQ, Yuen CWM, Ng MCF: ‘Surface characterization of electroless copper plated polyester fibers’, Surf. Eng., 2009, 25, (2), 101–105.
   Web of Science ®Google Scholar
• Zumelzu E, Rull F, Ortega C: ‘Titanium dioxide performance in polyethylene teraphthalate protective coatings on electrolytic chromium coated steels’, Surf. Eng., 2009, 25, (2), 111–115.
   Web of Science ®Google Scholar
• Yao JK, Huang HL, Xu C, Ma JY, He HB, Shao JD, Jin YX, Zhao YA, Fan ZX, Zhang F, Wu ZY: ‘Investigation on thermal stability of TiO2 films for application at high temperature’, Surf. Eng., 2009, 25, (2), 116–119.
   Web of Science ®Google Scholar
• Ashrafi A, Golozar MA, Mallakpour S: ‘Corrosion behaviour of 316L stainless steel coated by amorphous and semicrystalline polypyrrole’, Surf. Eng., 2009, 25, (2), 120–126.
   Web of Science ®Google Scholar
• Abdeli M, Ahmadi PN, Khosroshahi RA: ‘Study of chemical composition and heat treatment of electroless Ni–B–Tl alloy coating on AISI 316 stainless steel’, Surf. Eng., 2009, 25, (2), 127–130.
   Web of Science ®Google Scholar
• Wang H, Chen CZ, Wang DG: ‘Effect of heating rate on structure of HA coating prepared by sol–gel’, Surf. Eng., 2009, 25, (2), 131–135.
   Web of Science ®Google Scholar
• Gil LE, Liscano S, Goudeau P, Bourhis EL, Puchi-Cabrera ES, Staia MH: ‘Effect of TiAlN PVD coatings on corrosion performance of WC–6%Co’, Surf. Eng., 2010, 26, 7, 562–566.
   Google Scholar
• Arslan E, Totik Y, Çelik A, Efeoğlu İ: ‘Effect of annealing on adhesion of TiB2 films deposited by pulsed magnetron sputtering’, Surf. Eng., 2010, 26, (7), 567–570.
   Google Scholar
• Wang YF, Ma SL, Chu PK: ‘Toughness characteristics of arc enhanced magnetron sputtered SiCN hard films’, Surf. Eng., 2010, 26, (7), 571–577.
   Google Scholar
• Yıldız F, Alsaran A, Çelik A, Efeoğlu İ: ‘Multipass scratch test behaviour of TiAlN thin film deposited on 316L stainless steel and Ti6Al4V alloy with dc biased and pulsed magnetron sputtering’, Surf. Eng., 2010, 26, (7), 578–583.
   Google Scholar
• Ali MY, Mohammad AS: ‘Effect of conventional EDM parameters on the micro machined surface roughness and fabrication of a hot embossing master micro tool’, Mater. Manuf. Processes, 2009, 24, (4), 454–458.
   Web of Science ®Google Scholar
• Patel KM, Pandey PM, Rao PV: ‘Determination of an optimum parametric combination using a surface roughness prediction model for EDM of Al2O3/SiCw/TiC ceramic composite’, Mater. Manuf. Processes, 2009, 24, (6), 675–682.
   Web of Science ®Google Scholar
• Montgomery DC: ‘Design and analysis of experiments’, 7th edn; 2008, New York, Wiley.
   Google Scholar
• Keskin Y, Selçuk Halkacı H, Mevlüt K: ‘An experimental study for determination of the effects of machining parameters on surface roughness in electrical discharge machining (EDM)’, Int. J. Adv. Manuf. Technol., 2006, 28, 1118–1121.
   Web of Science ®Google Scholar
• Zeid OAAbu: ‘The role of pulse off time in electrodischarge machined AISI T1 high speed steel’, J. Mater. Process. Technol., 1996, 61, 287–291.
   Web of Science ®Google Scholar
• Zhao WS, Meng QG, Wang ZL: ‘The application of research on powder mixed EDM in rough machining’, J. Mater. Process. Technol., 2002, 129, 30–33.
   Web of Science ®Google Scholar
• Haron CHChe, Deros BMd, Ginting A, Fauziah M: ‘Investigation on influence of machining parameters when machining tool steel using EDM’, J. Mater. Process. Technol., 2001, 116, 84–87.
   Web of Science ®Google Scholar