References
- Sims CT: ‘Cobalt-base alloys’, in ‘The superalloys’, (ed. C. T. Sims and W. C. Hagel), 150–174; 1972, New York, John Wiley & Sons.
- Donachie MJ and Donachie SJ: ‘Superalloys, a technical guide’, 2nd edn; 2002, Materials Park, OH, ASM International.
- Kofstad P: ‘High temperature corrosion’; 1988, London, Elsevier Applied Science.
- Young DJ: ‘High temperature oxidation and corrosion of metals’ 1st edn; 2008, Amsterdam, Elsevier Corrosion Series.
- Jonsson T, Pujilaksono B, Hallström S, Agren J, Svensson JE, Johansson LG and Halvarsson M: ‘An ESEM in situ investigation of the influence of H2O on iron oxidation at 500°C’, Corros. Sci., 2009, 51, 1914–1924.
- Pérez P: ‘On the influence of water vapour on the oxidation behaviour of pure Ti’, Corros. Sci., 2007, 49, 1172–1185.
- Chevalier S, Juzon P, Przybylski K and Larpin JP: ‘Water vapor effect on high-temperature oxidation behavior of Fe3Al intermetallics’, Sci. Technol. Adv. Mater., 2009, 10, 045006.
- Lin ZJ, Li MS, Wang JY and Zhou YC: ‘Influence of water vapor on the oxidation behavior of Ti3AlC2 and Ti2AlC’, Scr. Mater., 2008, 58, 29–32.
- Kaplin C and Brochu M: ‘Effects of water vapor on high temperature oxidation of cryomilled NiCoCrAlY coatings in air and low-SO2 environments’, Surf. Coat. Technol., 2011, 205, 4221–4227.
- Hellström K, Tang JE, Jonsson T, Halvarsson M, Pompe R, Sundberg M and Svensson JE: ‘Oxidation behaviour of a (Mo, W)Si2-based composite in dry and wet oxygen atmospheres in the temperature range 350–950°C’, J. Eur. Ceram. Soc., 2009, 29, 2105–2118.
- Yamauchi A, Yi XM, Akiyama T and Kurokawa K: ‘Oxidation behavior of β-SiAlON in H2O-containing atmosphere’, Mater. Sci. Forum, 2011, 696, 395–399.
- Saunders SRJ, Monteiro M and Rizzo F: ‘The oxidation behaviour of metals and alloys at high temperatures in atmospheres containing water vapour: a review’, Progr. Mater. Sci., 2008, 53, 775–837.
- Othman NK, Othman N, Zhang J and Young DJ: ‘Effects of water vapour on isothermal oxidation of chromia-forming alloys in Ar/O2 and Ar/H2 atmospheres’, Corros. Sci., 2009, 51, 3039–3049.
- Zurek J, Young DJ, Essuman E, Hänsel M, Penkalla HJ, Niewolak L and Quadakkers WJ: ‘Growth and adherence of chromia based surface scales on Ni-base alloys in high- and low-pO2 gases’, Mater. Sci. Eng. A, 2008, A477, 259–278.
- Michalik M, Hansel M, Zurek J, Singhheiser L and Quadakkers WJ: ‘Effect of water vapour on growth and adherence of chromia scales formed on Cr in high and low pO2-environments at 1000 and 1050°C’, Mater. High Temper., 2005, 22, 213–221.
- Jonsson T, Pujilaksono B, Heidari H, Liu F, Svensson J.-E, Halvarsson M and Johansson L.-G: ‘Oxidation of Fe-10Cr in O2 and in O2+H2O environment at 600°C: a microstructural investigation’, Corros. Sci., 2013, 75, 326–336.
- Halvarsson M, Tang JE, Asterman H, Svensson J.-E and Johansson L.-G: ‘Microstructural investigation of the breakdown of the protective oxide scale on a 304 steel in the presence of oxygen and water vapour at 600°C’, Corros. Sci., 2006, 48, 2014–2035.
- Berthod P: ‘Kinetics of high temperature oxidation and chromia volatilization for a binary Ni–Cr alloy’, Oxidat. Met., 2005, 64, (3/4), 235–252.
- Essuman E, Meier GH, Zurek J, Hänsel M, Norby T, Singheiser L and Quadakkers WJ: ‘Protective and non-protective scale formation of NiCr alloys in water vapour containing high- and low-pO2 gases’, Corros. Sci., 2008, 50, 1753–1760.