References
- Akman E, Demir A, Canel T, Sinmazçelik T: ‘Laser welding of Ti6Al4V titanium alloys’, J. Mater. Process. Technol., 2009, 209, (8), 3705–3713.
- Short AB: ‘Gas tungsten arc welding of α+β titanium alloys: a review’, Mater. Sci. Technol., 2009, 25, 309–324.
- Yunlian Q, Ju D, Quan H, Liying Z: ‘Electron beam welding, laser beam welding and gas tungsten arc welding of titanium sheet’, Mater. Sci. Eng. A, 2000, A280, (1), 177–181.
- Caiazzo F, Curcio F, Daurelio G, Minutolo FMemola Capece: ‘Ti6Al4V sheets lap and butt joints carried out by CO2 laser: mechanical and morphological characterization’, J. Mater. Process. Technol., 2004, 149, (1–3), 546–552.
- Ion JC: ‘Laser processing of engineering materials; principles, procedure and industrial application’; 2005, Oxfrod, Elsevier Butterworth-Heinemann.
- Dilthey U, Fuest D, Scheller W: ‘Laser welding with filler wire’, Opt. Quantum Electron., 1995, 27, (12), 1181–1191.
- Cao X, Jahazi M, Immarigeon JP, Wallace W: ‘A review of laser welding techniques for magnesium alloys’, J. Mater. Process. Technol., 2006, 171, (2), 188–204.
- Donachie MJ: ‘Titanium: a technical guide’; 1989, Materials Park, OH, ASM International.
- ASM International: ‘ASM handbook’, Vol. 6, ‘Welding, brazing, and soldering’; 1993, Materials Park, OH, ASM International.
- Kabir ASH: ‘Nd:YAG laser welding of Ti–6Al–4V alloy’, MSc thesis, Concordia University, Montreal, Que., Canada, 2011.
- Dawes C: ‘Laser welding’; 1992, New York, McGraw-Hill, Inc.
- Cao X, Debaecker G, Poirier E, Marya S, Cuddy J, Birur A, Wanjara P: ‘Tolerances of joint gaps in Nd:YAG laser welded Ti–6Al–4V alloy with the addition of filler wire’, J. Laser Appl., 2011, 23(1), 012004(1–10).
- Pastor M, Zhao H, Martukanitz RP, DebRoy T: ‘Porosity, underfill and magnesium loss during continuous wave Nd:YAG laser welding of thin plates of aluminum alloys 5182 and 5754’, Weld. J., 1999, 78, 207s–216s.
- Cao X, Jahazi M: ‘Effect of welding speed on butt joint quality of Ti–6Al–4V alloy welded using a high-power Nd:YAG laser’, Opt. Lasers Eng., 2009, 47, (11), 1231–1241.
- AWS: ‘Specification for fusion welding for aerospace application’, AWS D17·1, American Welding Society, Miami, FL, USA, 2001.
- Khaled Z: ‘An investigation of pore cracking in titanium welds’, J. Mater. Eng. Perform., 1994, 3, (3), 419–434.
- Tsay L, Shan YP, Chao YH, Shu W: ‘The influence of porosity on the fatigue crack growth behavior of Ti–6Al–4V laser welds’, J. Mater. Sci., 2006, 41, (22), 7498–7505.
- Duley WW: ‘Laser welding’; 1998, New York, Wiley-Interscience.
- Cao X, Wallace W, Poon C, Immarigeon JP: ‘Research in laser welding of wrought aluminum alloys. II. Metallurgical microstructures, defects, and mechanical properties’, Mater. Manuf. Processes, 2003, 18, (1), 23–49.