Freeze lining formation in continuous converting calcium ferrite slags. I

References

• Goto M., Kawakita S., Kikumoto N. and Iida O.: ‘High intensity operation at Naoshima Smelter’, JOM, 1986, 38, (9), 43–46.
   Web of Science ®Google Scholar
• Takeda Y., Nakazawa S. and Yazawa A.: ‘Thermodynamics of calcium ferrite slags at 1200 and 1300°C’, Can. Metall. Q., 1980, 19, (3), 297–305.
   Web of Science ®Google Scholar
• Takeda Y., Ishiwata S. and Yazawa A.: ‘Distribution equilibria of minor elements between liquid copper and calcium ferrite slag’, Trans. Jpn. Inst. Met., 1983, 24, (7), 518–528.
   Google Scholar
• Zhao B., Hayes P. and Jak E.: ‘Effect of SiO2, Al2O3, MgO and Na2O on spinel liquidus in calcium ferrite slags with Cu and fixed PO2’. Proc. of Copper 2010, Vol II, GDMB GmbH, 1297–1312; 2010, Clausthal-Zellerfeld, Germany.
   Google Scholar
• Henao H., Nexhip C., George-Kennedy D., Hayes P. and Jak E.: ‘Investigation of liquidus temperatures and phase equilibria of copper smelting slags in the FeO–Fe2O3–SiO2–CaO–MgO–Al2O3 system at PO2 10−8 atm’, Metall. Mater. Trans. B, 2010, 41B, (4), 767–779.
   Web of Science ®Google Scholar
• Yazawa A., Takeda Y.: ‘Equilibrium relations between liquid copper and calcium ferrite slag’, Trans. Jpn. Inst. Met., 1982, 23, (6), 328–333.
   Google Scholar
• Ilyushechkin A., Hayes P.C. and Jak E.: ‘Liquidus temperatures in calcium ferrite slags in equilibrium with molten copper’, Metall. Mater. Trans. B, 2004, 35B, (2), 203–215.
   Web of Science ®Google Scholar
• Asteljoki J.A., Bailey L.K., George D.B. and Rodolff D.W.: ‘Flash converting – continuous converting of copper mattes’, JOM, 1985, 37, (5), 20–23.
   Web of Science ®Google Scholar
• Newmann C.J. and Weawer M.M.: ‘Kennecott flash converting furnace design improvements -2001’, in ‘Sulfide Smelting 2002’, (ed. Stephens R. L. .), 317–328; 2002, Warrendale, PA, TMS.
   Google Scholar
• Edwards J.S. and Alvear G.R.: ‘Converting using IsaSmelt™ Technology’, in Proc. of Cu2007-Vol. III (Book 2), (ed. A. Warner, C. Newman, A. Vahed, D. B. George, P. Mackey and A. Warczok), 17–28; 2007, Montreal (Canada), MetSoc.
   Google Scholar
• Matusewicz R., Hughes S. and Hoang J.: ‘The Ausmelt continuous copper converting (C3) process’, in Proc. of Cu2007-Vol. III (Book 2), (ed. A. Warner, C. Newman, A. Vahed, D. B. George, P. Mackey and A. Warczok), 29–47; 2007, Montreal (Canada), MetSoc.
   Google Scholar
• Jansson J., Taskinen P. and Kaskiala M.: ‘Freeze lining formation in continuous converting calcium ferrite slags. Part II’, Accepted for publication in Can. Metall. Q., May 27, 2013.
   Google Scholar
• Taskinen P., Kaskiala M., Hietanen P., Miettinen K. and Forsström A.: ‘Microstructure and formation kinetics of a freeze lining in an industrial copper FSF slag’, Miner. Process. Extr. Metall., 2011, 120, (3), 147–155.
   Google Scholar
• Taskinen P., Kaskiala M., Miettinen K. and Jansson J.: ‘Freeze-lining formation and microstructure in a direct-to-blister flash smelting slag’, ‘MOLTEN12’, Ninth International Conference On Molten Slags, Fluxes and Salts, 27 – 30; 2012, Beijing, China, CD-ROM proceedings, paper WO87.
   Google Scholar
• Pouchou J. -L and Pichoir F.: ‘Advanced quantitative procedures for analytical SEM and EPMA: X-ray microanalysis of light elements and layered specimens’, ‘10th European Congress on Electron Microscopy (EUREM 92)’, September 7–11, 1992, Granada, Spain.
   Google Scholar
• Davies R.H., Dinsdale A.T., Gisby J.A., Robinson J.A.J. and Martin S.M.: ‘MTDATA – Thermodynamic and phase equilibrium software from the national physical laboratory’, CALPHAD Comput. Coupling Phase Diagr. Thermochem., 2002, 26, (2), 229–271.
   Web of Science ®Google Scholar
• Gisby JA., Dinsdale A.T., Barton-Jones I., Gibbon A. and Taskinen P.A.: ‘Predicting phase equilibria in oxide and sulphide systems’, in ‘Sulfide Smelting 2002’ (ed. Stephens R. L. .), 533–545; 2002, Warrendale, PA, TMS.
   Google Scholar
• Phillips B. and Muan A.: ‘Stability relations of calcium ferrites: phase equilibria in the system 2CaO–Fe2 O3–FeO–Fe2O3–Fe2O3 above 1135°C’, Trans. Metall. Soc. AIME, 1960, 218, (6), 1112–1118.
   Google Scholar
• Liu X., Henao H., Hayes P. and Jak E.: ‘Subsolidus Phase Equilibria of System Cu–Ca–Fe–O’, ‘High Temperature Processing Symposium 2011’, 52; 2011, Melbourne (Australia), Swinburne University of Technology. Abstract only.
   Google Scholar
• Coursol P.: ‘Diagramme d’Equilibre du Systéme Ca2+,Na+//SO42−,O2−,AsO43−,SbO43− par Expérimentation et Modélisation et ses Applications dans l’Affinage du Cuivre’, PhD Thesis, Ècole Polytechnique de Montréal, Canada, 2004, 243 p.
   Google Scholar
• Campforts M., Verscheure K., Boydens E., van Rompaey T., Blanpain B. and Wollants P.: ‘On the microstructure of a freeze lining of an industrial nonferrous slag’, Metall. Mater. Trans. B, 2007, 38B, (6), 841–851.
   Web of Science ®Google Scholar
• Verscheure K., Kyllo A.K., Filzwieser A., Blanpain B. and Wollants P.: ‘Furnace cooling technology in pyrometallurgical processes’, in ‘Sohn International Symposium’, Vol. 4 (ed. Kongoli F. .), 139–154; 2006, Warrendale, TMS.
   Google Scholar
• Newmann C.J., Probert T.I. and Weddick A.J.: ‘Kennecott Utah Copper smelter modernization’, in ‘Sulfide Smelting ’98’ (ed. Asteljoki J. A. .), 205–215; 1998,Warrendale, PA, TMS.
   Google Scholar
• Asteljoki J. and Kytö M.: ‘Minor element behaviour in flash converting’, a paper presented in TMS Annual Meeting 1986 New Orleans (LA), TMS Technical Paper No A86–57, 13 p.
   Google Scholar
• Coursol P., Pelton A.D., Chartrand P. and Zamalloa M.: ‘The CaSO4–CaO–Ca3(AsO4)2 phase diagram’, Can. Metall. Q., 2005, 44, (4), 547–554.
   Web of Science ®Google Scholar
• Coursol P., Stubina N.M.: ‘Solid-solid reactions in the Ca3(AsO4)2–Ca2SiO3–CaSO4 ternary system at elevated temperatures’, Metall. Mater. Trans. B, 2006, 37B, (1), 141–143.
   Web of Science ®Google Scholar
• Padvet P., Tesarek P. and Plachy T.: ‘Evolution of mechanical properties of gypsum in time’, Int. J. Mechan., 2011, 5, (1), 1–9.
   Google Scholar
• Walton R., Foster R. and George-Kennedy D.: ‘An update on flash converting at Kennecott Utah Copper Corporation’, in ‘Converter and Fire Refining Practices’ (ed. Ross A. .), 283–294; 2005, Warrendale, PA, TMS.
   Google Scholar
• Voermann N., Ham F., Merry J., Veenstra R. and Hutchinson K.: ‘Furnace cooling design for modern, high-intensity pyrometallurgical processes’, in ‘Copper-Cobre 99 Int. Conf.’, Vol V-Smelting Operations and Advances (ed. George D. B. .), 573–582;1999, Warrendale, PA, TMS.
   Google Scholar