References
- ISO Memento, 1969, p. 3 (Geneva: International Organisation for Standardisation)
- DIN 50900: 1960, Corrosion of Metals (English translation)
- BSCP 2008: 1966, Protection of Iron and Steel Structures from Corrosion
- AS-MA 1.5, part 5: 1967, Protection of Steel from Corrosion
- BS 2569, part 1: 1964, Protection of Iron and Steel by Alu-minium and Zinc against Atmospheric Corrosion
- BS 2569, part 2: 1965, Protection of Iron and Steel against Corrosion and Oxidation at Elevated Temperatures
- 'Corrosion and its prevention at bimetallic contacts'. Inter-Service Metallurgical Research Council, London, 1956. Revised and reprinted 1963 (London: H.M.S.0.)
- NZS 2146: 1967, Safety Frames and Safety Cabs for attach-ment to Agricultural Wheeled Tractors
- BSCP 131.101: 1951, Flues for Domestic Appliances burning Solid Fuel
- NZS 1900, chapter 10: 1964, Non-structural External Wallings
- Kennett, A. C., Chemy Ind., N.Z., 1966, 2, 315
- CS.G 110. 8: 1968, Corrosion-resisting and Heat-resisting Wire
- AS-H3—H8: 1968 (Various standards for brass bars, sections, forgeings, sheets, strip and foil)
- ASTM, Index to Standards,1967, p. 37
- NZS 1900, chapter 7: 1964, Small Chimneys and Appliance Installation
- BS 1449, part 4: 1967, Stainless Steel and Heat-resisting Plate, Sheet and Strip
- BS 3531: 1962, Metal Surgical -Implants, Drills and Screw-drivers used in Bone Surgery
- BS 3871, part 1: 1965, Miniature and Moulded Case Circuit Breakers. Miniature Air-break Circuit Breakers for a.c. circuits
- NZGP 50: 1967, Automatic Fire-alarm Systems
- NZS 2139: 1967, Heat-actuated Fire Detectors
- BS 1133, section 2: 1967, Packaging Code. Storage of Packaging Materials
- BS 1133, section 19: 1953, Packaging Code. Use of Desic-cants in Packaging
- NZSR 19: 1966, Packaging, Marking and Identification of Goods
- BS 1170: 1968, Treatment of Water for Marine Boilers
- BS 2486: 1968, Treatment of Water for Land Boilers
- BS 3150: 1959, Corrosion-inhibited Ethanediol Anti-freeze for Water-cooled Engines. Type A. Triethanolammonium ortho-phosphate and sodium mercaptobenzothiazole inhibited
- BS 3151: 1959, Corrosion-inhibited Ethanediol Anti-freeze for Water-cooled Engines. Type B. Sodium benzoate and sodium nitrite inhibited
- BS 3152: 1959, Corrosion-inhibited Ethanediol Anti-freeze for Water-cooled Engines. Type C. Sodium tetraborate inhibited
- BS 1133, section 6: 1966, Temporary Protection of Metal Surfaces against Corrosion
- AS-CK9, parts I—VH: 1965 to 1967, Code of Recommended Practice for Preparation and Pretreatment of Metal Surfaces Prior to Protective Coating
- SIS 05 59 00: 1967, Rust Grades for Steel Surfaces and Preparation Grades Prior to Protective Coating
- ASTM D 1730: 1967, Preparation of Aluminium and Alu-minium-alloy Surfaces for Painting
- ASTM B 322: 1968, Cleaning Metals Prior to Electroplating
- ASTM B 253: 1968, Recommended Practice for Preparation and Electroplating on Aluminium Alloys
- NZS 2239: 1968, Recommendations for the Painting of Buildings
- BSCP 231: 1966, Painting of Buildings
- DG 8: 1969, Treatments for the Protection of Metal Parts of Service Stores and Equipment against Corrosion
- NZS 2226 P: 1968, Provisional Standard. Arc Butt-welded Steel Pipes and Fittings for Water, Sewage and Town Gas
- AS-A 126: 1965, Coal-tar Primer for Steel Pipes
- AS-A 127: 1965, Coal-tar Enamel for Steel Pipes
- AS-CA 36: 1965, Code of Recommended Practice for the Coating and Lining of Steel Pipes with Coal-tar Enamel
- BSCP 3003, part 1: 1967, Lining of Vessels and Equipment for Chemical Processes. Rubber
- BSCP 3003, part 4: 1965, Lining of Vessels and Equipment for Chemical Processes. Plasticised PVC
- BSCP 3003, part 5: 1966, Lining of Vessels and Equipment for Chemical Processes. Epoxide Resins
- BSCP 3003, part 6: 1966, Lining of Vessels and Equipment for Chemical Processes. Phenolic Resins
- BSCP 3003, part 2: 1966, Lining of Vessels and Equipment for Chemical Processes. Glass Enamel
- BSCP 114: 1957, Structural Use of Reinforced Concrete in Buildings
- AS-CA 41: 1965, Code of Recommended Practice for the Cement Mortar Lining of Steel Pipes and Fittings
- DEF 151: 1965, Anodising of Aluminium and Aluminium Alloys
- BS 1615: 1961, Anodic Oxidation Coatings on Aluminium
- BS AU 89: 1965, Anodised Aluminium for Automobile Use
- BS 3189: 1959, Phosphate Treatment of Iron and Steel for Protection against Corrosion.
- ASTM B 449: 1968, Recommended Practice for Chromate Treatments on Aluminium
- DEF 130: 1961, Chromate Passivation of Cadmium and Zinc Surfaces
- DTD 911C: 1963, Protection of Magnesium-rich Alloys against Corrosion
- AS-CK 10: 1965, Code of Recommended Practice for the Formation of Irridescent Chromate Passivation Films on Zinc
- BS 1706: 1960, Electroplated coatings of cadmium and zinc on iron and steel
- BS 1224: 1965, Electroplated coatings of nickel and chromium
- ISO Draft Recommendation 1456: 1968, Electroplated coat-ings of Nickel plus Chromium
- ISO Draft Recommendation 1457: 1968, Electroplated coat-ings of Copper plus Nickel plus Chromium on Steel
- ISO Draft Recommendation 1458: 1968, Electroplated coat-ings of Nickel
- BS 1872: 1964, Electroplated coatings of tin
- BS 2816: 1957, Electroplated coatings of silver for engineering purposes
- ASTM B 242: 1954, Preparation of high-carbon steel for electroplating
- ASTM B 252: 1961, Preparation of zinc-base die castings for electroplating
- ASTM B 253: 1968, Preparation of and electroplating on aluminium alloys
- ASTM B 254: 1961, Preparation of and electroplating on stain-less steel
- ASTM B 281: 1958, Preparation of copper and copper-based alloys for electroplating
- ISO Draft Recommendation 1459: 1968, Guiding Principles for Protection against Corrosion by Hot-dip Galvanising
- ISO Draft Recommendation 1461: 1968, Requirements for Hot-dip Galvanised Coatings on Fabricated Ferrous Products
- NZS 1343: 1960, Galvanised Sheets (Plain and Corrugated)
- CS G 164: 1965, Hot-dip Galvanising of Irregularly-shaped Articles
- BS 2920: 1969, Cold-reduced Tin-plate and Cold-reduced Back-plate
- BS STA 23: 1943, Services Specification for Terne-plate.
- CS G 189: 1966, Sprayed Metal Coatings for Atmospheric Corrosion Protection
- BS 1822: 1952, Nickel-clad Steel Plates
- BS 3740: 1964, Steel Plate Clad with Corrosion-resisting Steel
- ASTM B 432: 1966, Copper and Copper Alloy Clad Steel Plate
- BSCP 3003, part 3: 1965, Lining of Vessels and Equipment for Chemical Processes. Lead
- BSCP 3003, part 9 (Draft, 1968), Lining of Vessels and Equip-ment for Chemical Processes. Titanium
- DEF 150: 1965, Sherardising
- BSI Document No. 69/4906: 1969, Draft British Standard Specification for Metallic Zinc-rich Priming Paint
- ISO Draft Recommendation 1460: 1968, Determination of the Weight per unit Area of Hot-dip Galvanised Coatings on Ferrous Materials by Chemical Dissolution of the Coating —Gravimetric Method
- BS 729: 1961, Zinc Coatings on Iron and Steel Articles
- BS 3597: 1963, Electroplated Coatings of 65/35 tin—nickel
- ISO Draft Recommendation 1463: 1968, Measurement of Metal and Oxide Coating Thicknesses by Microscopic Examination of Cross-sections
- ASTM B 244: 1968, Measuring Thickness of Anodic Coatings on Aluminium with Eddy Current Instruments
- Morriset, P., Courr. Norm., 1968, 35, 545
- BS 443: 1961, Galvanised Coatings on Wire
- Morriset, P., Courr. Norm., 1968, 35, 542
- AFNOR, NF X41-002: 1966, Essai au Brouillard Salin
- BS 1391: 1952, Performance Tests for Protective Schemes used in the Protection of Light Gauge Steel and Wrought Iron against Corrosion
- BS 3745: 1964, Evaluation of Results of Accelerated Corrosion Tests on Metallic Coatings
- AFNOR FD A 91–020: 1963, Revêtements Métalliques. Clichés-étalons pour Essais de Corrosion.
- ISO Draft Recommendation 1462: 1968, Method for the Evaluation of Results of Accelerated Corrosion Tests on Coatings other than those Anodic to the Base Metal
- BS 3900: 1965–1969, Methods of Test for Paints
- DIN 50940: 1952, Rust Protection. Testing of Chemical Derusting Agents and Inhibitors for Iron and Steel. Labora-tory Tests. (English translation)
- ASTM D 1384: 1965, Glassware Corrosion Test for Engine Anti-freezes
- ASTM D 2570T: 1966, Simulated Service Corrosion Testing of Engine Anti-freezes.
- DIN 50909: 1954, Testing of Metallic Materials: Corrosion Tests in Soil in the absence of Electric Earth Currents
- DIN 50910: 1955, Testing of Metallic Materials: Influences Affecting Corrosion in Soil in the presence of Electric Earth Currents, and Methods of Measuring such Influences
- ASTM D 1385: 1967, Hydrazine in Industrial Water.
- ASTM D 1942: 1968, Morpholine in Industrial Water
- ASTM D 2328T: 1965, Corrosivity Test of Industrial Cooling Water. (Coupon Test Method)
- ASTM D 2688: 1968, Test for Corrosivity of Water in the absence of Heat Transfer
- ASTM D 807: 1965, Corrosivity Test of Industrial Water (USBM Embrittlement Detector Method)
- ASTM B 78: 1965, Accelerated Life Test of Iron-Chromium-Aluminium Alloys for Electrical Heating
- ASTM A 393: 1963, Recommended Practice for Conducting Acidified Copper Sulphate Test for Intergranular Attack on Austenitic Stainless Steel
- Champion, F. A., 'Corrosion Testing Procedures', 1963, chapter 13 (London: Chapman & Hall)
- Morriset, P., Electroplg. Metal Finish., 1964, p. 343
- LaQue, F. L., & Copson, H. R., 'Corrosion Resistance of Metals and Alloys', 1963 (New York: Reinhold Publishing Corporation)