REFERENCES
- P. BOUTIN: Rev. Chi. Orthop., 1972, 58, 229.
- G. WILLMANN, H. J. FRUIT, and H.-G. PFAFF: Bio Materials, 1996, 17, 2157–2162.
- W. PURL (ed.): Proc. Conf. '1st CERASIV', Stuttgart, Germany, March 1996, Enke Verlag.
- 'ISO 6474: Implants for surgery — ceramic materials based on alumina', 2nd edn; 1994, Genève, International Organisation for Standardisation.
- ASTM F-603: Standard for specification for high purity dense alumina oxide for surgical implant application': 1988, West Conshohocken, PA, ASTM.
- I. C. CLARKE and G. WILLMANN: in 'Bone implant interface', (ed. H. U. Cameron); 1994, St Louis, MO, Mosby.
- 'EN 843–1: Hochleistungskeramik — Bestimmung der Biegefestigkeif; 1994, Brussels, European Committee for Standardisation.
- ASTM C-1611–94: Standard test method for flexural strength of advanced ceramics at ambient temperature': 1994, West Conshohocken, PA, ASTM.
- 'DIN 51 110 Teil 1 (Entwurf ): Prtifung von Keramischen Hochleistungswerkstoffen: 4-Punkt-Biegeversuch bei Raumtemp-eratur'; 1991, Berlin.
- M. SEMLITSCH and W. DAWIHL: in 'Technical principles, design, and safety of joint implants', (ed. G. H. Buchhorn and H.-G. Willert); 1994, Göttingen, Hogrefe and Huber Publ.
- H. R. MAIER, A. KRAUTH, N. STäRK, and A. ZEIBIG: in ‘Biomaterials 1980’ 1982, London, Wiley.
- J. MIDDLETON, G. N. PANDE, H. G. RICHTER, and G. WILLMANN: J. Mater. Sci: Mater. Med., 1994, 5, 503–506.
- H. RICHTER, U. SEIDELMANN, and U. SOLTESZ: in Tiomaterials 1980'; 1982, London, Wiley.
- H. FESSLER and D. C. FRICKER: Proc. Inst. Mech. Eng. H, J. Eng. Med., 1989, 203, 15–30.
- A. 0. ANDRISANO, E. DRAGONI, and A. STROZZI: Proc. Inst. Mech. Eng. H, J. Eng. Med., 1990, 204, 157–167.
- 'FDA guidance document for the preparation of premarket notifications for ceramic ball hip systems', US Food and Drug Administration, Washington, DC, 1989.
- 'ISO 7206–5: Implants for surgery — partial and total hip joint prostheses. Part 5: determination of resistance to static load of head and neck region of stemmed femoral components'; 1992, Genève, International Organisation for Standardisation.
- 'ISO 9001: Quality systems — model for quality assurance in design/development, production, installation, and servicing'; 1987, Genève, International Organisation for Standardisation.
- G. WILLMANN, H. G. PFAFF, and H. RICHTER: Biomed. Technik., 1995, 40, 342–346.
- G. WILLMANN: Br. Ceram. Trans., 1995, 94, 38–41.
- M. SEMLITSCH, H. WEBER, and R. STEGER: Biomed. Technik., 1995, 40, 347–355.
- A. G. EVANS and S. M. WIEDERHORN: Int. J. Fract., 1974, 10, 379–392.
- R. SCHäFER, U. SOLTESZ, and D. SIEGELE: `Entwicklung von Proof-Test-Konzepten fur Hfiftgelenk-Kugelköpfe aus Keramik', IWM Report T 18/89, Fraunhofer-Institut fur Werkstoffmechanik, Freiburg, Germany, 1989.