References
- G. J. Davies, J. W. Edington, C. P. Cutler, K. A. Padmanabhan, “Superplasticity: A Review”, J. Mat. Sc. 5 (1970) 1091. D. H. Avery and W. A. Backofen, “A Structural Basis for Superplasticity”, Trans. ASM 58 (1965) 551. D. Lee and W. A. Backofen, “Superplasticity of Some Titanium and Zirconium Alloys”, Trans. AIME 239 (1967) 1034. D. L. Holt and W. A. Backofen, “Superplasticity in the Al-Cu Eutectic Alloy”, Trans. A. S. M. 59 (1966) 755.
- D. A. Woodford, “Strain Rate Sensitivity as a Measure of Ductility”, Trans. ASM 62 (1969) 291.
- F. Garofalo, “Ductility in Creep”, Ductility: ASM Seminar October 1967, p. 87. D. A. Woodford, “Analysis of Creep Curves for a Mg-Zr Alloy”, J. Inst. Metals 96 (1968) 371.
- C. E. Coleman, “Tertiary Creep in Cold-Worked Zircaloy-2”, Nuc. Mat. 42 (1972) 180.
- E. F. Ibrahim, “The Stress-Rupture Properties of Heat-Treated Zr-2.5% Nb Alloy”, Atomic Energy of Canada Report AECL-3361, May 1969.
- P. A. Ross-Ross, V. Fidleris and D. E. Fraser, “Anisotropic Creep Behaviour of Zirconium Alloys in a Fast Neutron Flux”, Can. Met. Quart. 11 (1972) 101. E. F. Ibrahim, “In-Reactor Tubular Creep of Zircaloy-2 at 260 to 300°C”, J. Nuc. Mat. 46 (1973).
- B. Watkins and D. S. Wood, “The Significance of Irradiation Induced Creep on Reactor Performance of a Zircaloy-2 Pressure Tube”, ASTM STP 458 (1969). D. S. Wood and B. Watkins, “A Creep Limit Approach to the Design of Zircaloy-2 Reactor Pressure Tubes at 275°C”, J. Nuc. Mat. 41 (1971) 327.
- C. E. Coleman, D. Mills and J. Van der Kuur, “Deformation parameters of neutron irradiated Zircaloy-4 at 300°C”, Can. Met. Quart. 11 (1972) 91.
- V. Fidleris and C. D. Williams, “Influence of neutron irra-diation on the creep of Zircaloy-2 at 300°C”, J. Electro. Chem. Tech. 4 (1966) 258.
- F. A. Nichols, “Evidences for Enhanced Ductility During Irradiation Creep”, Mat. Sci. Eng. 6 (1970) 167.