Constitutive Constants for Hot Working of Al-4.5 Mg - 0.35 Mn (AA5182)

REFERENCES

• H.J. McQueen and M.E. Kassner, Superplasticity in Aerospace II, T.R. McNelley, ed. TMS-AIME, Warrendale, PA., 1990, pp. 189–206.
   Google Scholar
• H.J. McQueen and J.J. Jonas, 2nd Intl. Conf. Properties of AlAlloys, C.Q. Chen, ed. Beijing, 1990, pp. 727–742.
   Google Scholar
• H.J. McQueen, E. Evangelista and M.E. Kassner, Z. Metallkde, 1991, Vol. 82, pp. 336–345.
   Google Scholar
• H.J. McQueen, Hot Deformation of Aluminum Alloys, T.G.Langdon et al. , eds., TMS-MME, Warrendale, PA., 1991, pp. 31–54.
   Google Scholar
• H.J.McQueen and O.C. Celliers, Can. Metal. Quart. , 1996,Vol. 35, pp. 303–319.
   Google Scholar
• M. E. Kassner, Hot Workability of Steels and Light Alloys-Composites, H.J. McQueen, E.V. Konopleva and N.D. Ryan, eds., Met. Soc. CIM, Montreal, 1996, pp. 217–226.
   Google Scholar
• Metals Handbook, Vol. 2, Properties and Selection of Non-ferrous Alloys, ASM International, Materials Park, OH., 10th Edition, 1990, pp. 16–122.
   Google Scholar
• F. Ostermann, Aluminum Material Technology For Automobile Construction, W.J. Bontz ed., Mech. Eng. Pub. Ltd., London, 1993.
   Google Scholar
• H.J. McQueen, J.J. Jonas, J. Appl. Metal Working, 1984-85,Vol. 3, pp. 233-241, 410-420.
   Google Scholar
• H.J. McQueen and D.L. Bourell, J. Met. , 1987, Vol. 39 [7], pp. 28–35.
   Google Scholar
• H.J. McQueen, Mat. Sci. Eng. , 1987, Vol. A101, pp. 149–160.
   Google Scholar
• H.J. McQueen, E. Evangelista and N.D. Ryan, Recrystallization ('90) in Metals and Materials, T. Chandra, ed., TMS-MME, Warrendale, PA., 1990, pp. 89–100.
   Google Scholar
• T. Sheppard, M.A. Zaidi, M.G. Tutcher and N.C. Parson, Microstructural Control in Al Alloy Processing, H. Chia and H.J. McQueen, eds., TMS-MME, Warrendale, PA., 1985, pp. 19-43, 123-154,155-178.
   Google Scholar
• N. Raghunathan, H.B. McShane, C.P. Lee and T. Sheppard, Hot Deformation of Aluminum Alloys, T.G. Langdon et al. , eds., TMS-MME, Warrendale, PA., 1991, pp 389-416.
   Google Scholar
• K.G. Gardiner and R. Grimes, Metal Sci. , 1979, Vol. 13, pp. 216–222.
   Google Scholar
• T. Sheppard, M.G. Tutcher, and H.M. Flower, Met. Sci. , 1979, Vol. 13, pp. 473–481.
   Google Scholar
• J.J. Urcola and C.M. Sellars, Acta Metal. , 1987, Vol. 35, pp. 2637–2669.
   Google Scholar
• M.R. Drury and F.J. Humphreys, Acta Metal. , 1986, Vol. 34, pp. 2259–2271.
   Google Scholar
• J.R. Cotner and W.J. McG. Tegart, J. Inst. Metals, 1969, Vol. 97, pp. 73–79.
   Google Scholar
• M. Ueki, S. Hone and T. Nakamura, Aluminum Alloys Physical and Mechanical Properties, E.A. Starke and T.H. Sanders, eds., EMAS, Warley UK, 1986, pp. 419–422.
   Google Scholar
• H.J. McQueen and N. Ryum, Scand. J. Met. , 1985, Vol. 14, pp. 183–194.
   Google Scholar
• E. Cerri, E. Evangelista and H.J. McQueen, High Temp .Mat.Proc. , 1999, Vol. 18, pp.227–240.
   Web of Science ®Google Scholar
• W. Blum, Q. Zhu, R. Merkel and H.J. McQueen, (ICAA5), Mat .Sci Forum, 1996, Vol. 217-222, pp.611-616.
   Google Scholar
• W. Blum, Q. Zhu, R. Merkel and H.J. McQueen, Mat. Sci. Eng. , 1996, Vol. A205, 1996, pp. 23–30.
   Google Scholar
• W. Blum, Q. Zhu, R. Merkel and H.J. McQueen, Z. Metalkde, 1996, Vol. 87, pp.14–23.
   Google Scholar
• H.J. McQueen, W.Blum, Q.Zhu and V.Demuth, Advances in Hot Deformation,Textures and Microstructures, J.J. Jonas et al. , eds., TMS-MME, Warrendale, PA., 1994, pp. 235–250.
   Google Scholar
• E.V. Konopleva, H.J. McQueen and W. Blum, Microstructural Science, 1995, Vol. 22, pp. 283–293.
   Google Scholar
• H.J. McQueen, H. Chia and E.A. Starke, Microstructural Control in Al Alloy Processing, H. Chia and H.J. McQueen, eds., T1VIS-MME, Warrendale, PA., 1985, pp. 1–18.
   Google Scholar
• F.J. Humphreys, Acta Metal. , 1977, Vol. 25, pp. 1323–1344.
   Google Scholar
• F.J. Humphreys and P. Kalu, Acta Metal. , 1987, Vol. 35, pp. 2815–2829.
   Google Scholar
• F.R. Castro-Fernandez and C.M. Sellars, Mat. Sci. Tech. , 1988, Vol. 4, pp. 621–627.
   Web of Science ®Google Scholar
• J.M. Belling, H.J. McQueen, B. Crawford and A.S. Malin, Recrystallization '90, T. Chandra, ed., TMS-AIME, Warrendale, PA., 1990, pp. 655–660.
   Google Scholar
• T. Sheppard and M.G. Tutcher, Met. Sci. , 1980, Vol. 14, pp. 579–589.
   Google Scholar
• T. Sheppard and M.G. Tutcher, Met. Tech. , 1981, Vol. 8, pp. 319–327.
   Google Scholar
• H.J. McQueen, E. Evangelista, J. Bowles and G. Crawford, Met. Sci. , 1984, Vol. 18, pp. 395–402.
   Google Scholar
• E. Evangelista, H.J. McQueen and E. Bonetti, Deformation of Multi-Phase and Particle Containing Materials, J. Bilde-Sorenson et al. , eds., Riso Natl. Lab., Roskilde, Denmark, 1983, pp. 243–250.
   Google Scholar
• G.A.Henshall, M.E. Kassner and H.J. McQueen, Metal. Trans. , 1992, Vol. 23A, pp. 881–889.
   Web of Science ®Google Scholar
• M.E. Kassner, M.M. Myshlyaev and H.J. McQueen, Mat. Sci. Eng. , 1989, Vol. A108, pp. 45–61.
   Google Scholar
• R. Grimes and R.G. Butler, Superplasticity in Aerospace, H.C. Heikkenen and T.R. McNelley, eds., TMS-AIME, Warrendale, PA., 1988, pp. 97–114.
   Google Scholar
• D.M.R. Taplin and R.F. Smith, Fracture 1988, (ICF4), D.M.R. Taplin, ed., Univ. of Waterloo, Ont., 1988, pp. 541–551.
   Google Scholar
• H.J.McQueen, Hot Deformation of Al Alloys II, T.R. Bieler et al. , eds., TMS-MME Warrendale PA., 1998, pp. 383–396.
   Google Scholar
• I. Poschmann and H.J. McQueen, Z. Metallkde. , 1997, Vol. 88, pp. 14–22.
   Google Scholar
• H.J. McQueen and I. Poschmann, THERMEC '97 (Woolongong, Australia), T. Chandra, ed., TMS-MME, Warendale, PA., 1997, pp. 951–957.
   Google Scholar
• M.A. Wells, R. Bolingbroke, I.V. Samarasekera, E.B. Hawbolt and J.K. Brimacombe, Light Metals Processing and Applications, C.Bickert et al, eds., Met. Soc. OM, Montreal, 1993, pp. 483–494.
   Google Scholar
• M.A. Wells, D.J. Lloyd, I.V. Samarasekera, J.K. Brimacombe and E.B. Hawbolt, Metal. Mater. Trans B, 1998, Vol. 29B, pp. 611–620.
   Web of Science ®Google Scholar
• M.A. Wells, D.J. Lloyd, I.V. Samarasekera, J.K. Brimacombe and E.B. Hawbolt, Metal. Mater. Trans B, 1998, Vol. 29B, pp. 621–632.
   Web of Science ®Google Scholar
• M.A. Wells, D.J. Lloyd, I.V. Samarasekera, J.K. Brimacombe and E.B. Hawbolt, Metal. Mater. Trans B, 1998, Vol. 29B, pp. 709–719.
   Web of Science ®Google Scholar
• J.R. Pickens, W. Precht and J.J. Mills, Hot Rolling Simulation by Torsion of EMC and DC 5182, Martin Marietta Labs, Baltimore, MD., 21227, 1984.
   Google Scholar
• W. Precht and J.R. Pickens, Met. Trans. , 1987, Vol. 18A, pp. 1603–1611.
   Web of Science ®Google Scholar
• T. Sheppard, Proc. 8th Light Metal Congress, J.Jeglitsch et
   Google Scholar
• T. Sheppard: Met. Tech. , 1981, Vol. 8, pp. 130–141.
   Google Scholar
• H.J. McQueen and P. Sakaris, Aluminum Alloys: Their Physical and Mechanical Properties - Proceedings ICAA3, L. Arnberg, E. Nes, O. Lohne, N. Ryum, eds., (TH-Sinteff, Trondheim, Norway, 1992, Vol. 2, pp. 179–184.
   Google Scholar
• H.J. McQueen and J. Belling, THERMEC '97 , Woolongong, Australia, T. Chandra, ed., TMS-AIME, Warendale, PA., 1997, Vol. 1, pp. 965–971.
   Google Scholar
• H.J. McQueen and J. Belling, J. Mat. Eng. Performance, 2000, (in press).
   Google Scholar
• H.J. McQueen and J. Belling, Light Metals, 1999 M. Bouchard and A. Faucher, eds., Met. Soc. CIM, Montreal, 1999, pp. 563–574.
   Google Scholar
• W.A. Wong and J.J. Jonas, Trans. Met. Soc. AIME, 1968, Vol. 242, pp. 2271–2280.
   Google Scholar
• S.R. Chen, M.G. Stout, U.F. Kocks, S.R. MacEwen and A.J. Beaudoin, Hot Deformation of Al Alloys II, T.R. Bieler et al. , eds., T1VIS-MME Warrendale PA., 1998, pp. 205–216.
   Google Scholar
• M.G. Stout, S.R. Chen, U.F. Kocks, A.J. Schwartz, S.R. MacEwen and A.J. Beaudoin, Hot Deformation of Al Alloys T.R. Bieler et al., eds., TMS-AIME Warrendale PA., 1998, 57, pp. 243–254.
   Google Scholar
• H.Weiss, D.H. Skinner, J.R.Everett, J. Phys, E (Sci. Instrum.), 1973, Vol. 6, pp. 709–714
   Web of Science ®Google Scholar
• I. Guttierez and M. Fuentes, Recrystallization '90, T. Chandra, ed., T1VIS-MME, Warrendale, PA., 1990, pp. 807–812.
   Google Scholar
• R.W. Evans and G.R. Dunstan, J. Inst. Metals '99, 1971, pp. 4–14.
   Google Scholar
• C.M. Sellars, A.M. Irisarri and E.S. Puchi, Microstructural Control of Al Alloys, E.H. Chia and H.J. McQueen, eds., Met. Soc. MME, Warrendale, PA., 1987, pp. 179–196.
   Google Scholar
• S. Martinez de la Puente, B. Verlinden and L. Delaey, J. Mat. Sci. , 1994, Vol. 29, pp. 6167–6174.
   Google Scholar
• M. Otsuka and R. Horiuchi, Creep and Fracture of Engineering Materials and Structures, B. Wilshire and D.R.J. Owens, eds., Pineridge Press, Swansea, U.K., 1984, pp. 157–168.
   Google Scholar
• T.G. Langdon, Strength of Metals and Alloys (ICSMA 5), R.C. Gains, ed., Pergamon Press, Oxford, 1982, pp. 1105–1120.
   Google Scholar