Scratch Test for Coating/Substrate Systems – A Literature Review

References

• P. Hedenqvist and S. Hogmark, “Experiences from Scratch Testing of Tribological PVD Coatings”, Tribology International, 1997, vol. 30, pp. 507–516.
   Web of Science ®Google Scholar
• J. Valli and U. M&elä, “Applications of the Scratch Test Method for Coating Adhesion Assessment”, Wear, 1987, vol. 115, pp. 215–221.
   Web of Science ®Google Scholar
• J. Sekler, P.A. Steinmann and HE. Hintermann, “The Scratch Test: Different Critical Load Determination Techniques”, Surface and Coating Technology, 1988, vol. 36, pp. 519–529.
   Web of Science ®Google Scholar
• K. Holmberg, A Laukkanen, H. Ronkainen, K. Wallin and S. Varjus, “A Model for Stresses, Crack Generation and Fracture Toughness Calculation in Scratched TiN-coated Steel Surfaces”, Wear, 2003, vol. 254, pp. 278–291.
   Web of Science ®Google Scholar
• Advanced Technical Ceramics-Methods of Tests for Ceramic Coatings. Part 3. Determination of Adhesion and Other Mechanical Failure Modes by Scratch Test, European Standard, 1999, prEN1071-3, pp. 42.
   Google Scholar
• K. Holmberg, A. Matthewst and H. Ronkainen, “Coatings Tribology — Contact Mechanisms and Surface Design”, Tribology International, 1998, vol. 31, pp. 107–120.
   Web of Science ®Google Scholar
• K. Holmberg, “The Basic Material Parameters That Control Friction and Wear of Coated Surfaces Under Sliding”, Tribologia — Finnish Journal of Tribology, 2000, vol. 19, pp. 3–18.
   Google Scholar
• F. P. Bowden and D. Tabor, Friction and Lubrication of Solids, 1950, Clarendon Press, Oxford, pp. 374.
   Google Scholar
• T. Spalvins and H. E. Sliney, “Frictional Behaviour and Adhesion of Ag and Au Films Applied to Aluminum Oxide by Oxygen-ion Assisted Screen Cage Ion Plating”, Surface and Coatings Technology, 1994, vol. 68-69, pp. 482–488.
   Google Scholar
• B. Bhushan, B. K. Gupta and M. H. Azarian, “Nanoindentation, Microscratch, Friction and Wear Studies of Coatings for Contact Recording Applications”, Wear, 1995, vol. 181-183, pp. 743–758.
   Google Scholar
• S. Jahanmir, D. E. Deckman, L. K. Ives, A. Feldman and E. Farabaugh, “Tribological Characteristics of Synthesized Diamond Films on Silicon Carbide”, Wear, 1989, vol. 133, pp. 73–81.
   Web of Science ®Google Scholar
• P. J. Burnett and D. S. Rickerby, “The Mechanical Properties of Wear-resistant Coatings I: Modeling of Hardness Behaviour”, Thin Solid Films, 1987, vol. 148, pp. 41–51.
   Web of Science ®Google Scholar
• I. P. Hayward, LL. Singer and L.E. Seizman, “Effect of Roughness on the Friction of Diamond on CVD Diamond Coatings”, Wear, 1992, vol. 157, pp. 215–227.
   Web of Science ®Google Scholar
• J. A. Sue and H.H. Troue, “Friction and Wear Properties of Titanium Nitride Coating in Sliding Contact with AISI 01 Steel”, Surface and Coating Technology, 1990, vol. 43-44, pp. 709–720.
   Google Scholar
• Y. Y. Guu, J. E Lin and C.-E Ai, “The Tribological Characteristics of Titanium Nitride Coatings. Part I Coating Thickness Effects”, Wear, 1996, vol. 194, pp. 12–21.
   Web of Science ®Google Scholar
• Y. Y. Guu, IF. Lin and C.-E Ai, “The Tribological Characteristics of Titanium Nitride Coatings. Part II Comparison of Two Deposition Processes”, Wear, 1996, Vol. 194, pp. 22–29.
   Web of Science ®Google Scholar
• P. A. Steinmann, Y. Tardy and H.E. Hintermann, “Adhesion Testing by the Scratch Test Method: The Influence of Intrinsic and Extrinsic Parameters on the Critical Load”, Thin Solid Films, 1987, vol. 154, pp. 333–349.
   Web of Science ®Google Scholar
• A. S. Argon, “Mechanical Properties of Near-surface Material in Friction and Wear”, Fundamentals of Tribology, 1980, eds. N.P. Suh and N. Saka. MIT Press, London, pp. 103–125.
   Google Scholar
• N. P. Suh, Tribophysics, 1986, Prentice-Hall, Englewood Cliffs, NJ, pp. 489.
   Google Scholar
• M. Gee and N.M. Jennett, “High Resolution Characterization of Tribochemical Films on Alumina,” Wear, 1995, vol. 193, pp. 133–145.
   Web of Science ®Google Scholar
• J. A. Harrison, C. T. White, R. J. Colton and D. W. Brenner, “Molecular-dynamics Simulations of Atomic-scale Friction of Diamond Surfaces”, The American Physical Society, Physical Review B, 1992, vol. 46, pp. 9700–9708.
   Web of Science ®Google Scholar
• J. A. Harrison, R. J. Colton, C. T. White and D. W. Brenner, “Effect of Atomic Scale Surface Roughness on Friction: A Molecular Dynamics Study of Diamond Surfaces,” Wear, 1993, vol. 168, pp. 127–133.
   Web of Science ®Google Scholar
• P. Benjamin and C. Weaver, “Adhesion of Metal Films to Glass,” Proceedings of the Royal Society of London Series A, Mathematical and Physical Sciences, 1959, vol. 254, pp. 177–183.
   Web of Science ®Google Scholar
• P. J. Burnett and D.S. Rickerby, “The Relationship Between Hardness and Scratch Adhesion”, Thin Solid Films, 1987, vol. 154, pp. 403–416.
   Web of Science ®Google Scholar
• S. J. Bull, “Failure Modes in Scratch Adhesion Testing”, Surface and Coating Technology, 1991, vol. 50, pp. 25–32.
   Web of Science ®Google Scholar
• S. J. Bull, “Spallation Failure Maps from Scratch Testing”, Materials at High Temperatures, 1995, vol. 13, pp. 169–174.
   Google Scholar
• R. D. Amell, “The Mechanics of the Tribology of Thin Film Systems,” Surface and Coating Technology, 1990, vol. 43-44, pp. 674–687.
   Google Scholar
• Li-Ye Huang, Ke-Wei Xu, J. Lu and B. Guelorget, “Nano-scratching Process and Fracture Mechanism of Amorphous Carbon Films”, Wear, 2003, vol. 254, pp. 1032–1036.
   Web of Science ®Google Scholar
• S. Veprek, S. Mukherjee, P. Karvankova, H.-D. Mannling, J.L. He, K. Moto and J. Prochazka, “Limits to the Strength of Super- and Ultra Hard Nanocomposite Coatings”, Journal of Vacuum Science and Technology, 2003, vol. A21, pp. 532–544.
   Google Scholar
• A. Perry, “The Adhesion of Chemically Vapour-deposited Hard Coatings to Steel — The Scratch Test”, Thin Solid Films, 1981, vol. 78, pp. 77–93.
   Web of Science ®Google Scholar
• J. von Stebut, R. Rezakhanlou, K. Anoun, H. Michel and M. Gantois, “Major Damage Mechanisms during Scratch and Wear Testing of Hard Coatings on Hard Substrates”, Thin Solid Films, 1989, vol. 181, pp. 555–564.
   Web of Science ®Google Scholar
• S. J. Bull, “Failure Mode Maps in the Thin Film Scratch Adhesion Test”, Tribology International, 1997, vol. 30, pp. 491–498.
   Web of Science ®Google Scholar
• P. Hedenqvist, M. Olsson and S. Jacobson, “Failure Mode Analysis of TiN-coated High Speed Steel: In Situ Scratch Adhesion Testing in the Scanning Electron Microscope”, Surface and Coatings Technology, 1990, vol. 41, pp. 31–49.
   Web of Science ®Google Scholar
• J. H. Je, E. Gyarmati and A. Naoumidis, “Scratch Adhesion Test of Reactively Sputtered TiN Coatings on Soft Substrate,” Thin Solid Films, 1986, vol. 136, pp. 57–67.
   Web of Science ®Google Scholar
• A. G. Tangena, S. Franklin and J. Franse, “Scratch Tests on Hard Layers,” Tribology Series 17, Mechanics of Coatings: Proceedings of the 16th Leeds-Lyon Symposium on Tribology Held at the Institute National des Sciences Appliquees, Lyon, France, 5th-8th September 1989, pp. 169–174.
   Google Scholar
• M. Gold and C.C. Berndt, “Scratch Testing of Nanocrystalline Alumina + 13% Titania + Zirconia”, Proceedings of the International Thermal Spray Conference, Singapore; 28-30 May 2001, ASM International, Materials Park, Ohio, USA (2001) pp. 1105-1110.
   Google Scholar
• J. Valli, “A Review of Adhesion Test Methods for Thin Hard Coatings”, Journal of Vacuum and Science Technology, 1986, vol. A4, pp. 3007–3014.
   Google Scholar
• S. V. Hainsworth and W.C. Soh, “The Effect of the Substrate on the Mechanical Properties of TiN Coatings”, Surface and Coatings Technology, 2003, vol. 163-164, pp. 515–520.
   Google Scholar
• M. R. Lovell, Z. Deng and M.M. Khonsari, “Experimental Characterization of Sliding Friction: Crossing From Deformation to Plowing Contact”, Transactions of ASME, Journal of Tribology, 2000, Vol. 122, pp. 856–863.
   Web of Science ®Google Scholar
• D. S. Rickerby, “A Review of the Methods for the Measurement of Coating-substrate Adhesion”, Surface and Coatings Technology, 1988, vol. 36, pp. 541–557.
   Web of Science ®Google Scholar
• J. Oroshnik and W.K. Croll, “Threshold Adhesion Failure—Approach to Al Thin-Film Adhesion Measurement Using the Stylus Method” in Adhesion Measurement of Thin Films, Thick Films and Bulk Coatings, ASTM, STP 640, 1978, pp. 158–183.
   Google Scholar
• Y. Xie and H.M. Hawthorne, “Effect of Contact Geometry on the Failure Modes of Thin Coatings in the Scratch Adhesion Test”, Surface and Coatings Technology, 2002, vol. 155, pp. 121–129.
   Web of Science ®Google Scholar
• Y. Xie and H.M. Hawthorne, “A Model for Compressive Coating Stresses in the Scratch Adhesion Test”, Surface and Coatings Technology, 2001, vol. 141, pp. 15–25.
   Web of Science ®Google Scholar
• Y. Xie and H.M. Hawthorne, “A Controlled Scratch Test for Measuring the Elastic Property, Yield Stress and Contact Stress-strain Relationship of a Surface”, Surface and Coatings Technology, 2000, vol. 127, pp. 130–137.
   Web of Science ®Google Scholar
• A. Perry, “Scratch Adhesion Testing of Hard Coatings,” Thin Solid Films, 1983, vol. 107, pp. 167–180.
   Web of Science ®Google Scholar
• P. Steinmann and H. Hintermann, “Adhesion of TiC and Ti(C, N) Coatings on Steel”, Journal of Vacuum and Science Technology, 1985, vol. A3, pp. 2394–2400.
   Google Scholar
• A. J. Perry, “Scratch Adhesion Testing: A Critique”, Surface Engineering, 1986, vol. 2, pp. 183–190.
   Google Scholar
• A. J. Perry and H.K. Pulker, “Hardness, Adhesion and Abrasion Resistance of TiO2 Films on Glass”, Thin Solid Films, 1985, vol. 124, pp. 323–333.
   Web of Science ®Google Scholar
• B. Hammer, A.J. Perry, P. Laeng and P.A. Steinmann, “The Scratch Test Adhesion of TiC Deposited Industrially by Chemical Vapour Deposition on Steel”, Thin Solid Films, 1982, vol. 96, pp. 45–51.
   Web of Science ®Google Scholar
• E. Hummer and A.J. Perry, “Adhesion and Hardness of Ion-plated TiC and TiN Coatings”, Thin Solid Films, 1983, vol. 101, pp. 243–251.
   Web of Science ®Google Scholar
• W. D. Sproul, “Very High Rate Reactive Sputtering of TiN, ZrN and HfN”, Thin Solid Films, 1983, vol. 107, pp. 141–147.
   Web of Science ®Google Scholar
• A. Pan and J.E. Greene, “Interfacial Chemistry Effects on the Adhesion of Sputter-deposited TiC Films to Steel Substrates”, Thin Solid Films, 1982, vol. 97, pp. 79–89.
   Web of Science ®Google Scholar
• M. Bromark, M Larsson, P. Hedenqvist, M. Olsson and S. Hogmark, “Influence of Substrate Surface Topography on the Critical Normal Force in Scratch Adhesion Testing of TiN-coated Steels”, Surface and Coatings Technology, 1992, vol. 52, pp. 195–203.
   Web of Science ®Google Scholar
• B. Jönsson and S. Hogmark, “Hardness Measurements of Thin Films,” Thin Solid Films, 1984, vol. 114, pp. 257–269.
   Web of Science ®Google Scholar
• P. J. Burnett and D.S. Rickerby, “The Mechanical Properties of Wear-resistant Coatings: II: Experimental Studies and Interpretation of Hardness”, Thin Solid Films, 1987, vol. 148, pp. 51–65.
   Web of Science ®Google Scholar
• Standard Terminology of Adhesives, D 907-93c, Annual Book of Standards, 1994, vol. 15.06, ASTM, pp. 27–36.
   Google Scholar
• C. K. Lin and C.C. Berndt, “Measurement and Analysis of Adhesion Strength for Thermally Sprayed Coatings”, Journal of Thermal Spray Technology, 1994, vol. 3, pp. 75–104.
   Web of Science ®Google Scholar
• J. Valli, “TiN Coating Adhesion Studies Using the Scratch Test Method”, Journal of Vacuum and Science Technology, 1985, vol. A3, pp. 2411–2424.
   Google Scholar
• P. Benjamin and C. Weaver, “The Adhesion of Evaporated Metal Films on Glass”, Proceedings of the Royal Society of London Series A, Mathematical and Physical Sciences, 1961, vol. 261, pp. 516–531.
   Web of Science ®Google Scholar
• C. Weaver, “Adhesion of Thin Films”, Journal of Vacuum and Science Technology, 1975, vol. 12, pp. 18–25.
   Web of Science ®Google Scholar
• M. T. Laugier, “An Energy Approach to the Adhesion of Coatings Using the Scratch Test”, Thin Solid Films, 1984, vol. 117, pp. 243–249.
   Web of Science ®Google Scholar
• M. T. Laugier, “Adhesion of TiC and TiN Coatings Prepared by Chemical Vapour Deposition on WC-Co-based Cemented Carbides”, Journal of Materials Science, 1986, Vol. 21, pp. 2269–2272.
   Web of Science ®Google Scholar
• P. J. Burnett and D.S. Rickerby, “The Scratch Adhesion Test: an Elastic Plastic Indention Analysis”, Thin Solid Films, 1988, vol. 157, pp. 233–254.
   Web of Science ®Google Scholar
• S. J. Bull, D.S. Rickerby, A. Matthews, A. Leyland, A.R. Pace and J. Valli, “The Use of Scratch Adhesion Testing for the Determination of Interfacial Adhesion: The Importance of Frictional Drag”, Surface and Coating Technology, 1988, vol. 36, pp. 503–517.
   Web of Science ®Google Scholar
• H. E. Evans, “Modelling Oxide Spallation”, Materials at High Temperatures, 1994, vol. 12, pp. 219–227.
   Web of Science ®Google Scholar
• J. W. Hutchinson and Z. Suo, “Mixed Mode Cracking in Layered Materials”, Advances in Applied Mechanics, 1992, vol. 29, pp. 63–191.
   Web of Science ®Google Scholar
• S. R. Choi, J.W. Hutchinson and A.G. Evans, “Delamination of Multiplayer Thermal Barrier Coatings”, Mechanics of Materials, 1999, vol. 31, pp. 431–447.
   Web of Science ®Google Scholar
• J. S. Wang and A.G. Evans, “Measurement and Analysis of Buckling and Buckle Propagation in Compressed Oxide Layers on Superalloy Substrates”, Acta Materialia, 1998, vol. 46 (14), pp. 4993–5005.
   Web of Science ®Google Scholar
• S. L. Zhang and J.C.M. Li, “Slip Process of Stick-slip Motion in the Scratching of a Polymer”, Material Science and Engineering, 2003, vol. A344, pp. 182–189.
   Google Scholar
• G. Subhash and W. Zhang, “Investigation of the Overall Friction Coefficient in Single-pass Scratch Test”, Wear, 2002, vol. 252, pp. 123–134.
   Web of Science ®Google Scholar
• J. C. M. Li, “Adhesive Contact and Scratch of Polymer Coatings”, Materials Science and Engineering, 2001, vol. A317, pp. 197–203.
   Google Scholar
• J. A. Williams, “Analytical Models of Scratch Hardness”, Tribology International, 1996, vol. 29, pp. 675–694.
   Web of Science ®Google Scholar
• Y. N. Liang, S.Z. Li, D.E Li and S. Li, “Some Developments for Single-pass Pendulum Scratching”, Wear, 1996, vol. 199, pp. 66–73.
   Web of Science ®Google Scholar
• K. Li, Y. Shapiro and J.C.M. Li, “Scratch Test of Soda-lime Glass”, Acta Materialia, 1998, vol. 46, pp. 5569–5578.
   Web of Science ®Google Scholar
• B. J. Briscoe, A. Delfino and E. Pelillo, “Single-pass Pendulum Scratching of Poly (Styrene) and Poly (Methylmethacrylate)”, Wear, 1999, vol. 225-229, pp. 319–328.
   Google Scholar
• V. Jardret, H. Zahouani, J. L. Loubet and T. G. Mathia, “Understanding and Qualification of Elastic and Plastic Deformation During Scratch Test”, Wear, 1998, vol. 218, pp. 8–14.
   Web of Science ®Google Scholar
• Y. Wang and S.M. Hsu, “Lubricated Friction and Wear Simulation of Multi-scratches in Asperity-asperity Contact”, Wear, 1998, vol. 217, pp. 104–109.
   Web of Science ®Google Scholar
• G. Subhash, J.E. Loukus, W. Zhang and A. Chandra, “Experimental and Numerical Modeling of Material Removal During High Speed Grinding Process”, Proceedings of the SEM IX International Congress on Experimental Mechanics, 2000, Orlando, FL, pp. 127–130.
   Google Scholar
• H. Wang, S. Subhash and A. Chandra, “Characteristics of Single-grit Rotating Scratch with a Conical Tool on Pure Titanium”, Wear, 2001, vol. 249, pp. 566–581.
   Web of Science ®Google Scholar
• V. L. Rabinovich and V.K. Sarin, “Modeling of Interfacial Fracture”, Materials Science and Engineering, 1996, vol. A209, pp. 82–90.
   Google Scholar
• L. Zheng and S. Ramalingam, “Stresses in a Coated Solid Due to Shear and Normal Boundary Tractions,” Journal of Vacuum and Science Technology, 1995, Vol. A13, pp. 2390–2398.
   Google Scholar
• S. Ramalingam and L. Zheng, “Film-substrate Interface Stresses and Their Role in the Tribological Performance of Surface Coatings”, Tribology International, 1995, vol. 28, pp. 145–161.
   Web of Science ®Google Scholar
• K. Mao, Y. Sun and T. Bell, “A Numerical Model for the Dry SlidingContact of Layered Elastic Bodies with Rough Surfaces”, Tribology Transactions, 1996, vol. 39, pp. 416–424.
   Web of Science ®Google Scholar
• J. L. Bucaille, E. Felder and G. Hochstetter, “Mechanical Analysis of the Scratch Test on Elastic and Perfectly Plastic Materials with the Three-dimensional Finite Element Modeling”, Wear, 2001, vol. 249, pp. 422–432.
   Web of Science ®Google Scholar
• Jiang Xiao Yu, B. Lauke, W. Berckert and T. Schuller, “Numerical Simulation of Micro-scratch Tests for Coating/Substrate Composites”, Composite Interfaces, 2001, vol. 8, pp. 19–40.
   Web of Science ®Google Scholar
• Jiang Xiao Yu, B. Lauke and T. Schuller, “Frictional Contact Analysis of Scratch Test for Elastic and Elastic Plastic Thing-coating/Substrate Materials”, Thin Solid Films, 2002, vol. 414, pp. 63–71.
   Web of Science ®Google Scholar
• E. R. Kral and K. Komvopoulos, “Three-dimensional Finite Element Analysis of Subsurface Stress and Strain Fields Due to Sliding Contact on an Elastic Plastic Layered Medium”, Transactions of ASME, Journal of Tribology, 1997, vol. 119, pp. 332–341.
   Web of Science ®Google Scholar
• E. R. Kral and K. Komvopoulos, “Three-dimensional Finite Element Analysis of Surface Deformation and Stresses in an Elastic-plastic Layered Medium Subjected to Indentation and Sliding Contact Loading”, ASME Journal of Applied Mechanics, 1996, vol. 63(2 ), pp. 365–375.
   Web of Science ®Google Scholar
• E. R. Kral and K. Komvopoulos, “Three-dimensional Finite Element Analysis of Subsurface Stresses and Shakedown Due to Repeated Sliding on a Layered Medium”, ASME Journal of Applied Mechanics, 1996, vol. 63, pp. 967–973.
   Web of Science ®Google Scholar
• L. S. Stephens, Y. Liu and E. I. Meletis, “Finite Element Analysis of the Initial Yielding Behaviour of a Hard Coating/Substrate System with Functionally Graded Interface under Indentation and Friction”, Transactions of ASME, Journal of Tribology, 2000, vol. 122, pp. 381–387.
   Web of Science ®Google Scholar
• M. Barge, G. Kermouche, P. Gilles and J.M. Bergheau, “Experimental and Numerical Study of the Ploughing Part of Abrasive Wear”, Wear, 2003, vol. 255, pp. 30–37.
   Web of Science ®Google Scholar
• D. F. Diao, K. Kato and K. Hayashi, “The Maximum Tensile Stress on a Hard Coating under Sliding Friction”, Tribology International, 1994, vol. 27, pp. 267–272.
   Web of Science ®Google Scholar
• K. Holmberg, “Surface Fracture Toughness Measurement by the Scratch Test Method”, Tribologia — Finnish Journal of Tribology, 2000, vol. 19, pp. 24–32.
   Google Scholar
• W. Zhang and G. Subhash, “An Elastic Plastic-cracking Model for Finite Element Analysis of Indentation Cracking in Brittle Materials”, International Journal of Solids and Structures, 2001, vol. 38, pp. 5893–5913.
   Web of Science ®Google Scholar
• G. Subhash and W. Zhang, “Finite Element Analysis of Brittle Cracking Due to Single Grit Rotating Scratch”, ASME, Journal of Applied Mechanics, 2003, vol. 70, pp. 147–151.
   Web of Science ®Google Scholar
• T. Z. Gorishnyy and L.G. Olson et. al.. “Optimization of Wear-resistant Coating Architectures Using Finite Element Analysis”, American Vacuum Society, Journal of Vacuum Science Technology, 2003, vol. A21, pp. 332–339.
   Google Scholar
• T. SchUller, W. Beckert and B. Lauke, “A Finite Element Model to Include Interfacial Roughness into Simulations of Micromechanical Tests”, Computational Materials Science, 1999, vol. 15, pp. 357–366.
   Web of Science ®Google Scholar
• ISO 6508-1:1999, Metallic Materials — Rockwell Hardness Test - Part 1: Test Method (scales A, B, C, D, E, F, G, H, K, N, T). International Organization for Standardization.
   Google Scholar
• Y. Berthier, M. Godet and M. Brendle, “Velocity Accommodation in Friction”, Tribology Transaction, 1989, vol. 32, pp. 490–496.
   Web of Science ®Google Scholar
• A. W. Eberhardt and S. Pen, “Surface Cracks in Layered Hertzian Contact with Friction”, Tribology Transactions, 1995, vol. 38, pp. 299–304.
   Web of Science ®Google Scholar
• J. Mackerle, “Finite Element and Boundary Element Modelling of Surface Engineering Systems”, Finite Elements in Analysis and Design, 2000, vol. 34, pp. 113–124.
   Web of Science ®Google Scholar
• J. Li, A. Hsieh and T.-W. Chu, “Mechanical Behaviour of Thin-film Coating/Substrate Systems Under Nanoindentaion”, Damage Mechanics in Engineering Materials, 1998, ed. by G.Z. Voyiadjis et al. , Elseviere Science, pp. 287–302.
   Google Scholar
• J. Li and W. Beres, “Three-Dimensional Finite Element Modelling of the Scratch Test for a TiN Coated Titanium Alloy Substrate,” Wear, 2006, vol. 260, pp. 1232–1242.
   Web of Science ®Google Scholar
• ISO 14577-1:2002, Metallic Materials - Instrumented Indentation Test for Hardness and Materials Parameters—Part 1: Test Method; International Organization for Standardization.
   Google Scholar
• ISO 6508-2:1999, Metallic materials — Rockwell Hardness Test — Part 2: Verification and Calibration of Testing Machines (scales A, B, C, D, E, F, G, H, K, N, T); International Organization for Standardization.
   Google Scholar
• B. Shiari, R.E. Miller, W. Beres and L. Zhao, “Coupled Atomistic/Continuum Discrete Dislocation Modeling of Nanoscratching”, Third International Symposium on Aerospace Materials and Manufacturing, COM 2006, 2006, Montreal, QC, Canada, pp. 563–575.
   Google Scholar
• U. D. Schwarz and H. Hölscher, “Atomic-Scale Friction Studies Using Scanning Force Microscopy”, Modern Tribology Handbook , 2001, Volume One, Ed. B. Bhushan, CRC Press.
   Google Scholar