Reference
- S. W. Hopkins, C. A. Rau, G. R. Leverant, and A. Yuen: 'Fatigue crack growth under spectrum loads', STP 595, 125; 1976, Philadelphia, Pa, American Society for Testing and Materials.
- I. Gray, M. D. Heaton, and G. Oates: Proc. of British Steel Corporation Conf. on 'Mechanics and mechanisms of crack growth', Cambridge University, April 1974, 264.
- M. D. Heaton: 'The mechanics and physics of fracture', 34; 1975, London, The Metals Society.
- J. R. Griffiths and G. Oates : Met. Sci., 1977, 11,285.
- L. P. Pook: 'Stress analysis and growth of cracks', STP 513, 106; 1972, Philadelphia, Pa, American Society for Testing and Materials.
- P. C. Paris, R. J. Bucci, E. T. Wessel, W. G Clark, and T. R. Mager: ibid., 141.
- R. J. Bucci, W. G. Clark, and P. C. Paris: ibid., 177.
- M. Klesnil and P. LukdS": Mater. Sci. Eng., 1972, 9, 231.
- M. Klesnil and P. Lukdg: Eng. Fract. Mech., 1972,4,77.
- E. K. Priddle: 'Constant amplitude fatigue crack propagation in a mild steel at low stress intensity: the effect of mean stress on propagation rate', Technical Report RD/B/ N2233, May 1972, Berkeley Nuclear Laboratories, Central Electricity Generating Board.
- H. Kitagawa, H. Nishitani, and J. Matsumoto: 'Proc. 3rd int. congr. on fracture', Vol. 5, Paper V-444/A; 1973, Düsseldorf, Verein Deuts cher Eisenhtittenleute.
- R. J. Cooke and C. J. Beevers: Eng. Fract. Mech., 1973,5, 1061.
- R. J. Cooke and C. J. Beevers: Mater. Sci. Eng., 1974, 13, 201.
- A. Otsuka, K. Mori and T. Miyata: Eng. Fract. Mech., 1975, 7, 429.
- J. Masounave and J.-P. Banon: Scr. Metall., 1975, 9, 723.
- J. Masounave and J.-P. Banon: ibid., 1976, 10,165.
- L. P. Pook and A. F. Greenham: 'Proc. fatigue testing and design conf.', Vol. 2, 30. 1; 1976, London, Society of Environmental Engineers.
- J. Masounave and J.-P. Baïlon: 'Proc. 2nd int. conf. on mechanical behavior of materials', 636; 1976, Metals Park, Ohio, American Society for Metals.
- M. Kikukawa, M. Jono, and K. Tanaka: ibid., 716.
- L.P. Pook: Met. Sci., 1977, 11,382.
- R. J. Cooke, P. E. Irving, G. S. Booth, and C. J. Beevers: Eng. Fract. Mech., 1975,7, 69.
- J. Mautz and V. Weiss: 'Cracks and fracture', STP 601, 154; 1976, Philadelphia, Pa, American Society for Testing and Materials.
- E. K. Priddle: 'Fracture 1977', (ed. D. M. R. Taplin), Vol. 2, 1249; 1977, Waterloo, Ont., University of Waterloo Press.
- R. O. Ritchie: ibid., 1325.
- R. O. Ritchie: Metall. Trans., 1977,8A, 1131.
- R. O. Ritchie: J. Eng. Mater. Technol. (Trans. ASME, H), 1977, 99, 195.
- R. O. Ritchie: Met. Sci., 1977, 11, 368.
- A. Ohta and E. Sasaki: Eng. Fract. Mech., 1977,9,307.
- M. F. Carlson and R. O. Ritchie: Scr. Metall., 1977,11, 1113.
- A. C. Pickard, R. O. Ritchie, and J. F. Knott: Met. Technol., 1975, 2, 253.
- E. K. Priddle, F. Walker, and C. Wiltshire: 'Proc. conf. on influence of environment on fatigue', 137; 1977, London, Institution of Mechanical Engineers.
- C. Bathias, A. Pineau, J. Pluvinage, and P. Rabbe: 'Fracture 1977', (ed. D. M. R. Taplin), Vol. 2, 1283; 1977, Waterloo, Ont., University of Waterloo Press.
- J. L. Robinson and C. J. Beevers: Met. Sci. J., 1973,7, 153.
- J. L. Robinson, P. E. Irving, and C. J. Beevers: 'Proc. 3rd int. congr. on fracture', Vol. 5, Paper V-343; 1973, Düsseldorf, Verein Deuts cher Eisenhiittenleute.
- R. J. Bucci, P. C. Paris, R. W. Hertzberg, R. A. Schmidt, and A. F. Anderson: 'Stress analysis and growth of cracks', STP 513, 125; 1972, Philadelphia, Pa, American Society for Testing and Materials.
- P. E. Irving and C. J. Beevers: Mater. Sci. Eng.,1974, 14, 229.
- P. E. Irving and C. J. Beevers: Metall. Trans., 1974, 5,391.
- A. W. Thompson and I. M. Bernstein: 'Advances in corrosion science and technology', (eds. M. G. Fontana and R. W. Staehle), Vol. 7, 53; 1979, New York, Plenum Press.
- R. Ebara, K.. Inoue, S. Crosby, J. Groeger, and A. J. McEvily: 'Pro c. 2nd int. conf. on mechanical behavior of materials', 685; 1976, Metals Park, Ohio, American Society for Metals.
- A. J. McEvily and J. Groeger: 'Fracture 1977', (ed. D. M. R. Taplin), Vol. 2, 1293; 1977, Waterloo, Ont., University of Waterloo Press.
- C. J. Beevers: Met. Sci., 1977, 11,362.
- R. A. Schmidt and P. C. Paris: 'Progress in flaw growth and fracture toughness testing', STP 536, 79; 1973, Philadelphia, Pa, American Society for Testing and Materials.
- J. F. Knott and A. C. Pickard: Met. Sci., 1977, 11,399.
- A. C. Pickard, R. O. Ritchie, and J. F. Knott: alloys', Aug. 1976, 473; Nancy, France, INPL.
- H. Kitagawa and S. Takahashi: "Proc 2nd int. conL on.mechanical behavior of materials', 627; 1976, Metals Park, Ohio, American Society for Metals.
- F. P. Ford and T. P. Hoar: 'The microstructure and design of alloys', Vol. 1,467; 1974, London, The Metals Society.
- O. Vosikovsky: J. Eng. Mater. Technol. (Trans. ASME, H), 1975, 97,298.
- T. R. Mager, D. M. Moon, and J. D. Landes:
- W. H. Bamford and D. M. Moon: 'Corrosion
- R. O. Ritchie, G. G. Garrett, and J. F. Knott: Int. J. Fract. Mech., 1971, 7,462.
- R. O. Ritchie and K. J. Bathe: Int. J. Fract.,
- P. S. Pao, W. Wei, and R. P. Wei: 'Environment sensitive fracture of engineering-materials', (ed. Z. A. Foroulis), 565; 1979.
- S. J. Hudak, A. Saxena, R. J. Bucci, and R. C. Malcolm: Third Semi-Annual Report to A FML, Westinghouse Research and Development Laboratories, Pittsburgh, March 1977.
- K.Jerram and E.K.Priddle: J. Mech. Eng. Sci., 1973, 15, 271.
- A. Saxena, S. J. Hudak, J. K. Donald, and D. W. Schmidt: Scientific Paper 77-IE7-FANWLP P1, Westinghouse Research and Development Laboratories, Pittsburgh, May 1977.
- H.H.Johnson and P.C.Paris: Eng. Fract. Mech., 1968, 1, (1), 3.
- P. C. Paris and F. Erdogan: J. Basic Eng. (Trans. ASME. D), 1963,85, 528.
- C. Laird and G. C.Smith: Philos. Mag., 1962, 7,847.
- R. M. N. Pelloux: Eng. Fract.Mech., 1970, 1, (4),697.
- C. E. Richards and T. C. Lindley: ibid., 1972,
- R. O. Ritchie and J. F. Knott: Acta. Metall.,
- R. O. Ritchie and J. F. Knott: Mater. Sci. Eng., 1974, 14,7.
- T. C. Lindley, C. E. Richards, and R. O.
- F. A. McClintock: 'Fatigue crack propagatio n', STP 415, 170; 1967, Philadelphia, Pa, American Society for Testing and Materials.
- J. K. Tien: 'Effect of hydrogen on behavior of materials', (eds. A. W. Thompson and I. M. Bernstein), 301; 1976, New York, AIME.
- R. A. Oriani and P. H. Josephic: Acta Metall., 1974, 22, 1065.
- W. W. Gerberich and Y. T. Chen: Metall. Trans., 1975, 6A, 271.,
- N. E. Paton, J. C. Williams, J. C. Chesnutt, and A. W. Thompson: Proc. AGARD Conf. on 'Alloy design for fatigue and fracture resistance', No. 185, April 1975, 4–1; Neuilly sur Seine, France, NATO.
- N. E. Paton and R. A. Spurling: Metall. Trans., 1976, 7A, 1769.
- R. P. Wei and J. D. Landes: Mater. Res. Standards, 1969, 9,25.
- H. G. Nelson: 'Proc. 2nd int. conf. on mechanical behavior of materials', 690; 1976, Metals Park, Ohio, American Society for Metals.
- H. G. Nelson: 'Effects of hydrogen on behavior of materials', (eds. A. W. Thompson and I. M. Bernstein), 602; 1976, New York, AIME.
- R. P. Wei and G. W. Simmons: 'Fracture mechanics and surface chemistry studies of steels for coal gasification systems', Lehigh University Report No. IFSM-77---87, Dec. 1977.
- O. Vosikovsky: J. Test. Eval., 1978, 6, 175.
- W. J. Plumbridge: J. Mater. Sci., 1972, 7, 939.
- C. J. Beevers, R. J. Cooke, J. F. Knott, and 78. R. O. Ritchie: Met. Sci., 1975, 9, 119.
- A. Ohta and E. Sasaki: Eng. Fract. Mech., 1977, 9, 655.
- T. C. Lindley and C. E. Richards: 'Fatigue crack growth at low stresses in steels', Central Electricity Generating Board Laboratory Note No. RD/L/N 135/78, Aug. 1978, Central Electricity Research Laboratories, Leatherhead, Surrey.
- P. E. Irving and A. Kurzfeld: Met. Sci., 1978, 12,495.
- W. Elber: 'Damage tolerance in aircraft structures', STP 486, 230; 1971, Philadelphia, Pa, American Society for Testing and Materials.
- S. Suresh, C. M. Moss, and R. O. Ritchie: 'Proc. 2nd Japan Institute of Metals in symp. on hydrogen in metals', Sendai, Japan, Nov. 1979, Paper 27B23.
- R. O. Ritchie, R. F. Smith, and J. F. Knott: Met. Sci., 1975. 9,485.
- M. H. El Haddad, T. H. Topper, and K. N. Smith: J. Eng. Mater. Technol. (Trans. ASME, H), 1979, 101, 42.
- M. H. El Haddad, T. H. Topper, and K. N. Smith: Eng. Fract. Mech., 1979, 11, 573.
- N. E. Dowling: 'Cyclic stress—strain and plastic deformation aspects of fatigue crack growth', STP 637, 97; 1977, Philadelphia, Pa, American Society for Testing and Materials. M. E. Fine and R. O. Ritchie: 'Fatigue and microstructure', (ed. M. Meshii), 245; 1979, Metals Park, Ohio, American Society for Metals.
- J. Barsom, E. J. Imhof, and S. T. Rolfe: Eng. Fract. Mech., 1970, 2, 301.
- J. P. Benson and D. V. Edmonds: Met. Sci., 1978, 12, 223.
- O. Vosikovsky: Eng. Fract. Mech., 1979, 11,595.
- A. J. McEvily: 'Recent research on mechanical behavior of solids': 1979, Tokyo, University of Tokyo Press.
- P. Kuhn and H. Hardrath: NACE Technical Report No. NACE TN 2805, 1952.
- R. O. Ritchie: 'Proc. int. conf. on fundamentals of tribology'; 1979, Cambridge, Mass., MIT Press.
- R. M. Pelloux: 'Ultrafine-grain metals 231; 1970, Syracuse, NY, Syracuse University Press.
- A. W. Thompson and R. J. Bucci: Metall. Trans., 1973, 4, 1173.
- A. W. Thompson: Eng. Fract. Mech., 1975, 7,61.
- G. R. Yoder, L. A. Cooley, and T. W. Crooker: J. Eng. Mater. Tecknol. (Trans. ASME, II), 1979, 101, 86.
- J. D. Frandsen and H. L. Marcus: Scr. Metall., 1975,9, 1089.
- J. F. Lesser and W. W. Gerberich: Metall. Trans., 1976, 7A, 953.
- R. O. Ritchie, M. H. Castro Cedé-no, V. F. Zackay, and E.R. Parker: ibid., 1978, 9A, 35.
- R. O. Ritchie, V. A. Chang, and N. E. Paton: J. Fatigue Eng. Mater. Structures, 1979,1.
- A.S. Tetelman: 'Fundamental aspects of stress corrosion cracking', (ed. R. W. Staehle), 446; 1969, Houston, Texas, NACE.
- E. E. Fletcher, W. E. Berry, and G. A. Elsen: ibid., 457.
- W.W.Gerberich: 'Hydrogen in metals', (eds. I. M. Bernstein and A. W. Thompson), 115; 1974, Metals Park, Ohio, American Society for Metals.
- C. B. Gilpin and N. A. Tiner: Corrosion, 1966, 22, 271.
- C. S. Carter: ibid., 1969,25, 423.
- R. O. Ritchie: 'Environment sensitive fracture of engineering materials', (ed. Z. A. Foroulis), 538; 1979, New York, AIME.
- H. Suzuki and A. J. McEvily: Metall. Trans., 1979, 10A, 475.
- G. J. Fowler: Mater. Sci. Eng., 1979, 39, 121.
- A. D. Wilson: J. Pressure Vessel Technol. (Trans. ASME, J), 1977, 99,459.
- P. Shaninian, H. H. Smith, and J. R. Hawthorne: Weld. J. Res. Suppl.,,1972, 51, 527.
- L. A. James : At. Energy R ev., 1976, 14, 37.
- N. G. Nelson and D. P. Williams: Metall. Trans., 1970, 1,63.
- G. W. Simmons, P S. Pao, and R. P. Wei: ibid., 1978, 9A, 1147.
- S. J. Hudak and R. P. Wei: ibid., 1976, 7A, 235.
- R. P. Gangloff and R. P. Wei: ibid., 1977,8A, 1043.
- P. G. Shewmon: ibid., 1976, 7A, 279.
- R. P. Wei and D. L. Ritter: J. Mater., 1972, 7, 240.
- L. K. L. Tu and B. B. Seth: J. Test. Eval., 1978, 6, 66.
- E. K. Priddle and F. E. Walker: J. Mater. Sci., 1976, 11,386.
- R. O. Ritchie: Eng. Fract. Mech., 1975, 7, 187.
- R.O. Ritchie: PhD thesis, University of Cambridge, 1973.
- V. Weiss and D. N. Lal: Metall. Trans., 1974, 5, 1946.
- K. Sadananda and P. Shaninian: Int. J. Fract., 1977, 13, 585.
- J. H. Shively, R. F.Hehemann, and A.R. Troiano: Corrosion, 1966, 22, 253.
- G. Clark, R.O. Ritchie, and J. F. Knott: Nature Phys. Sci., 1972, 239, 104.
- R. M. Latanision and H. Opperhauser: Metall. Trans., 1974, 5,483.
- H. Nisitani and K. Takeo: Eng. Fract. Mech., 1974, 6, 253.
- A. Ohta and E. Sasaki: Int. J. Fract., 1975, 11, 1049,
- A. J. McEvily: Met. Sci., 1977, 11,274.
- O. Buck, J. D. Frandsen, and H. L. Marcus: Eng. Fract. Mech., 1975, 7, 167.
- P. E. Irving, J. L. Robinson, and C. J. Beevers: ibid., 619.
- P. E. Irving, J. L.Robinson, and C. J. Beevers: Int. J. Fract., 1973, 9, 105.
- V. Bachmann and D. Munz: ibid., 1975. 11. 713.
- T. C. Lindley and C. E. Richards : Mater. Sci. Eng., 1974, 14, 281.
- F. J. Pitoniak, A. F. Grandt, L. T. Montulli, and P. F. Packman: Eng. Fract. Mech., 1974, 6, 663.
- C. K. Clarke and G. C. Cassatt: ibid., 1977,9, 675.
- V. Bachmann and D. Munz: ibid., 1979, 11, 61.
- K. D. Unangst, T. T. Shih, and R. P. Wei: ibid., 1977, 9, 725.
- 'Crack arrest threshold AKth'; French Round Robin Program on Threshold Testing, Groupe de la Commission de Fatigue, May 1978. ( Translated by ASTM for E. 24. 04 Subcommittee on Subcritical Crack Growth.)