REFERENCES
- A. Arrowsmith: J. Iron Steel Inst., 1924,110, 317–319.
- W. J. Berry: Iron Coal Trade Rev., 1928, 66, 900.
- H. Hanemann and F. Lücke: Stahl Eisen, 1925, 45, 1117–1122.
- W. Barr and C. F. Tipper: J. Iron Steel Inst., 1947,157, 223–238.
- I. M. Mackenzie: J. West Scotland Iron Steel Inst., 1952–53,60,224–258.
- J. M. Hodge, R. D. Manning, and H. M. Reich-hold: Trans. AIME, 1949,185, 233–240.
- R. H. Frazier, F. W. Boulger, and C. H. Lorig: Iron Steel Eng., Oct. 1956, 33, 67–77.
- E. O. Hall: Proc. Phys. Soc., 1951, 64B, 747–753.
- J. Heslop and N. J. Petch: Philos. Mag., 1958, 3, 1128–1136.
- H.-J. Wiester, W. Dahl, and H. Hengstenberg: Stahl Eisen, 1962, 82, 1176–1186.
- M. Haneke: Arch. Eisenhüttenwes., 1962, 33, 233–239.
- R. W. Vanderbeck: Weld. J., 1958, 37, 114S–116S.
- C.A. Beiser: Preprint 138, Annual Convention ASM, Chicago, 1959.
- Great Lakes Steel Corp.: Steel, 1960,116, 102.
- T.M. Norén: Ship Structure Committee Special Report, 1963, SSC — 154.
- W. B. Morrison: J. Iron Steel Inst., 1963, 201, 317–325.
- K.J. Irvine: ‘Strong tough structural steels', 1—10; 1967, London, The Iron and Steel Institute.
- W. E. Duckworth, R. Phillips, and J. A. Chapman: J. Iron Steel Inst., 1965, 203, 11081114.
- W. E. Duckworth: Iron Steel, 1964, 37, 585588.
- R. Phillips and J. A. Chapman: J. Iron Steel Inst., 1966, 204, 615–622.
- J. J. Irani, D. Burton, J. D. Jones, and A. B. Rothwell: ‘Strong tough structural steels', 110–122; 1967, London, The Iron and Steel Institute.
- J. D. Jones and A. B. Rothwell: 'Deformation under hot working conditions', 78—82; 1968, London, The Iron and Steel Institute.
- R. Priestner, C. C. Earley, and J. H. Rendali: J. Iron Steel Inst., 1968, 206, 1252—1262.
- K. J. Irvine, T. Gladman, J. Orr, and F. B. Pickering: J. Iron Steel Inst., 1970, 208, 717— 726.
- I. Kozasu, T. Shimizu, and H. Kubota: Trans. Iron Steel Inst. Jpn, 1971,11, 367–375.
- H. Sekine and T. Maruyama: 'The microstructure and design of alloys', Vol. 1, 85—88; 1974, London, The Metals Society.
- T. Tanaka, N. Tabata, T. Hatomura, and C. Shiga: ‘Microalloying 75’, 107–119; 1977, New York, Union Carbide Corporation.
- T. Tanaka: ‘Hot deformation of steels', 2349; 1980, Tokyo, The Iron and Steel Institute of Japan.
- T. Tanaka, T. Funakoshi, M. Ueda, T. Yasuda, J. Tsuboi, and C. Utahashi: ‘Microalloying 75’, 399–409; 1977, New York, Union Carbide Corporation.
- A. le Bon, J. Rofes-Vernis, and C. Rossard: Mém. Sci. Rev. Metall., 1973, 70, 577–588.
- J.J. Jonas and I. Weiss Met. Sci., 1979,13, 238–245.
- H. Sekine and T. Maruyama: Trans. Iron Steel Inst. Jpn, 1976,16,427–^36.
- M. Fukuda, T. Hashimoto, and K. Kunishige: ‘Microalloying '75', 136–150; 1977, New York, Union Carbide Corporation.
- I. Kozasu, C. Ouchi, T. Sanpei, and T. Okita: ‘Microalloying 75’, 120–135; 1977, New York, Union Carbide Corporation.
- T. Tanaka and N. Tabata Tetsu-to-Hagané, 1978,64, 1353–1362.
- J. H. Little, J. A. Chapman, W. B. Morrison, and B. Mintz: ‘The microstructure and design of alloys', Vol. 1, 80–84; 1974, London, The Metals Society.
- T. Coleman, D. Dulieu, and A. Gouch: ‘The microstructure and design of alloys', Vol. 1, 70–74; 1974, London, The Metals Society.
- J. D. Baird and R. R. Preston: 'Processing and properties of low-carbon steel', 1–46; 1973, New York, Metallurgical Society of AIME.
- A. le Bon and L. N. de Saint-Martin: 'Micro- alloying 75', 90–99; 1977, New York, Union Carbide Corporation.
- H. Matsubara, T. Osuka, I. Kozasu, and K. Tsukada: Trans. Iron Steel Inst. Jpn, 1972,12, 435–443.
- H. Sekine and T. Maruyama Seitetsu Kenkyu 1976,289,11920–11937.
- T. Gladman and D. Dulieu Met. Sci., 1974, 8, 167–176.
- T. Tanaka: ‘Hot deformation of steels', 55— 72; 1979, Tokyo, The Iron and Steel Institute of Japan.
- M. Fukuda, T. Hashimoto, and K. Kunishige: Tetsu-to-Hagané, 1972, 58, 1832–1847.
- T. Tanaka, T. Hatomura, and N. Tabata: Kawasaki Steel Tech. Rep., 1974, 6, 522–537.
- W. J. McG. Tegart and A. Gittins: 'The hot deformation of austenite', 1—67; 1977, New York, American Institute of Mining, Metallurgical and Petroleum Engineers.
- R. A. P. Djaic and J. J. Jonas: Metall. Trans., 1973,4, 621–624.
- H. J. McQueen: J. Met., April 1968, 20, 31–38.
- C. Ouchi, T. Okita, T. Sanpei, and I. Kozasu: Tetsu-to-Hagané, 1977, 63, A53–A56.
- D. J. Towle and T. Gladman Met. Sci., 1979, 13, 246–256.
- C. Ouchi, T. Sanpei, T. Okita, and I. Kozasu: ‘The hot deformation of austenite', 316—340; 1977, New York, American Institute of Mining, Metallurgical and Petroleum Engineers.
- T. Hatomura and T. Tanaka Tetsu-to-Hagané, 1976, 62, S468.
- T. Tanaka, T. Hatomura, and N. Tabata: Tetsu- to-Hagané, 1976, 62, S206.
- I. Kozasu: Trans. Iron Steel Inst. Jpn, 1972,12, 241–250.
- Y. Ohmori: Nippon Kinzoku Gakkaishi, 1966, 30, 1164–1167.
- M. Lamberigts and T. Greday: 'The hot deformation of austenite', 286–315; 1977, New York, American Institute of Mining, Metallurgical, and Petroleum Engineers.
- J.N. Cordea and R. E. Hook: Metall. Trans., 1970,1, 111–118.
- M.J. Stewart: ‘The hot deformation of austenite’, 233—249; 1977, New York, American Institute of Mining, Metallurgical and Petroleum Engineers.
- A. B. Rothwell: Mém. Sci. Rev. Mét all, 1972, 69,413—424.
- T. L. Capeletti, L. A. Jackman, and W. J. Childs: Metall. Trans., 1972, 3, 789–796.
- R. Priestner and M. S. Biring: Met. Sci. J., 1973,7, 60–64.
- R. Priestner: Rev. MétalL, 1975, 72, 285–296.
- T. Greday and M. Lamberigts: 'Microalloy- ing 75', 172–187; 1977, New York, Union Carbide Corporation.
- A. le Bon, J. Rofes-Vernis, and C. Rossard: Met. Sci., 1975, 9, 36–40.
- O. Akisue and K. Takashina Trans. Jpn Inst. Met., 1973,14,489–495.
- S. Sekino, N. Mori, and S. Tamukai: Tetsu-to- Hagané, 1972,58, 1044–1053.
- R. Coladas, J. Masounave, and J.-P. Bailon: 'The hot deformation of austenite', 341—383; 1977, New York, American Institute of Mining, Metallurgical and Petroleum Engineers.
- H. Watanabe, Y. E. Smith, and R. D. Pelke: ‘The hot deformation of austenite', 140—168; 1977, New York, American Institute of Mining, Metallurgical and Petroleum Engineers.
- A. T. Davenport, R. E. Miner, and R. A. Kot: ‘The hot deformation of austenite’, 186—203 1977, New York, American Institute of Mining, Metallurgical and Petroleum Engineers.
- T. G. Oakwood, W. E. Heitman, and E.S. Madrzyk: ‘The hot deformation of austenite', 204^-232; 1977, New York, American Institute of Mining, Metallurgical and Petroleum Engineers.
- I. Weiss and J.J. Jonas: Metall. Trans., 1979, 10A, 831–840.
- K.J. Irvine and T. N. Baker: Met. Sci., 1979, 13, 228–237.
- H. Kaji, M. Katsumata, M. Machida, and S. Kinoshita: Tetsu-to-Hagané, 1974, 60, S295.
- H. Sekine, T. Maruyama, and Y. Kawashima: Tetsu-to-Hagané, 1974, 60, S557.
- W. B. Morrison and J. A. Chapman: Philos. Trans.R. Soc., 1976, 282A, (1307), 289–303.
- E. L. Brown, A. J. DeArdo, and J. H. Bûcher: ‘The hot deformation of austenite', 250—285; 1977, New York, American Institute of Mining, Metallurgical and Petroleum Engineers.
- R. Priestner and E. de los Rios: 'Heat treatment 76', 129–134; 1976, London, The Metals Society.
- G. F. Melloy and J. D. Dennison: 'The microstructure and design of alloys', Vol. 1, 60—64; 1974, London, The Metals Society.
- S. Gohda, K. Watanabe, and Y. Hashimoto: Tetsu-to-Hagané, 1979, 65,1400–1409.
- T. Hashimoto, T. Sawamura, and H. Ohtani: Tetsu-to-Hagané, 1979, 65, 1425–1433.
- C. R. Mackenzie and R. W. Young: J. Iron Steel Inst., 1971, 209, 918–920.
- Y. Saito and T. Tanaka Tetsu-to-Hagané, 1975, 61, S211.
- Y. E. Smith and C. A. Siebert: Metall. Trans., 1971,2, 1711–1725.
- T. Terazawa, H. Higashiyama, and S. Sekino: ‘Toward improved ductility and toughness’, 101–117; 1972, Tokyo, Climax Molybdenum Company (Japan) Ltd.
- A. Jones and B. Walker: British Steel Corporation Open Report, SM/612/A, 1974.
- S. Matsuo, T. Maruyama, and H. Sekine: Tetsu-to-Hagané, 1974, 60, S559.
- F. Terasaki and T. Kaneko Tetsu-to-Hagané, 1975, 61, S208.
- B. L. Bramfitt and A. R. Marder: 'Processing and properties of low-carbon steel', 191—224; 1973, New York, American Institute of Mining, Metallurgical and Petroleum Engineers.
- G. R. Speich and D. S. Dabkowski: 'The hot deformation of austenite', 557—598; 1977, New York, American Institute of Mining, Metallurgical and Petroleum Engineers.
- I. Kozasu and H. Inagaki Nippon Kinzoku Gakkai Kaiho, 1976,15, 261–270.
- T. Yutori and R. Ogawa Tetsu-to-Hagané, 1979, 65, 1747–1755.
- H. Inagaki, K. Kurihara, and I. Kozasu: Tetsu- to-Hagané, 1975, 61, 991–1011.
- T. Tanaka: Nippon Kinzoku Gakkai Kaiho, 1978,17, 104–110.
- I. Kozasu: '36th and 37th Nishiyama memorial lecture', 65—96; 1975, Tokyo, The Iron and Steel Institute of Japan.
- W.B. Morrison: Met. Technol., 1975,2,33–41.
- E. Miyoshi, M. Fukuda, H. Iwanaga, and T. Okazawa: Proc.Conf. 'Crack propagation in pipelines', paper no. 4, 26—27 March 1974, Newcastle upon Tyne, The Institution of Gas Engineers.
- E. Miyoshi, T. Tanaka, M. Fukuda, H. Iwanaga, and T. Okazawa: Tetsu-to-Hagané, 1976, 62, 688–695.
- F.D. Kazinczy and W. A. Backofen Trans. ASM, 1961, 53, 55–73.
- G. Baldi and G. Buzzichelli Met. Sci., 1978, 12,459–472.
- J.F. Knott: ‘Effect of second-phase particles on the mechanical properties of steel', 44— 53; 1971, London, The Iron and Steel Institute.
- J. D. Embury, N. J. Petch, A. E. Wraith, and E. S. Wright: Trans. AIME, 1967, 239,114–118.
- I. Kozasu and H. Kubota Trans. Iron Steel Inst. Jpn, 1971, 11, 321–330.
- E. Miyoshi, M. Fukuda, T. Hashimoto, and Y. Asai: Tetsu-to-Hagané, 1974, 60, S220.
- R. Schofield, G. Rountree, N. V. Sarma, and R. T. Weiner: Met. Technol., 1974,1, 325–331.
- J. D. Embury and K. Cooper Can. Metall. Q., 1975,14, 69–83.
- E. Hornbogen and K. D. Beckmann: Arch. Eisenhüttenwes., 1976,47, 553—558.
- M. lino, H. Mimura, and N. Nomura: Trans. Iron Steel Inst. Jpn, 1977, 17, 450–458; 1978, 18, 33–42.
- M. Fukuda, K. Kunishige, and S. Sugizawa: Tetsu-to-Hagané, 1978, 64, 740–748.
- E. A. Almond: Metall. Trans., 1970,1, 20382041.
- T. Mori, T. Enami, T. Funakoshi, and R. Okabe: Tetsu-to-Hagané, 1977, 63, S796.
- L. Luyckx, J. R. Bell, A. McLean, and M. Korchynsky: Metall. Trans., 1970,1, 3341— 3350.
- H. Pirchner and W. Klapar: 'Microalloying 75', 232–240; 1977, New York, Union Carbide Corporation.
- A. Brownrigg and F. M. Chambers: J. Iron Steel InsU, 1970,208,1078–1082.
- O. Haida, T. Emi, K. Sanbongi, T. Shiraishi, and A. Fujiwara: Tetsu-to-Hagané, 1978, 64,15381547.
- T. N. Baker and N. A. McPherson: Met. Sci., 1979,13, 611–618.
- S. Matsuda, T. Inoue, H. Mimura, and Y. Okamura: ‘Toward improved ductility and toughness', 45–66; 1972, Tokyo, Climax Molybdenum Company (Japan) Ltd.
- T. Kunitake, F. Terasaki, Y. Ohmori, and H. Ohtani: ‘Toward improved ductility and toughness’, 83—100; 1972, Tokyo, Climax Molybdenum Company (Japan) Ltd.
- A. Kamada, N. Koshizuka, and T. Funakoshi: Trans. Iron Steel Inst. Jpn, 1976,16,407–416.
- T. Gladman, D. Dulieu, and I. D. Mclvor: ‘Microalloying '75', 32–54; 1977, New York, Union Carbide Corporation.
- F.B. Pickering: ‘Microalloying'75', 9—31; 1977, New York, Union Carbide Corporation.
- F. Heisterkamp and L. Meyer Thyssenforschung, 1971, 3,44—65.
- L. Meyer, H. E. Bühler, and F. Heisterkamp: Thyssenforschung, 1971, 3, 8—43.
- D. Webster and J. H. Woodhead: J. Iron Steel Inst., 1964, 202, 987–994.
- M. Durbin and P. R. Krahe: 'Processing and properties of low-carbon steel', 109—132; New York, American Institute of Mining, Metallurgical and Petroleum Engineers.
- K. Kunishige, T. Hashimoto, and T. Yukitoshi: Tetsu-to-Hagané, 1980, 66, 63–72.
- K. Imai and I. Kozasu: Tetsu-to-Hagané, 1974, 60,S566.
- Y. E. Smith, A. P. Coldren, and R. L. Cryder-man: 'Toward improved ductility and toughness', 119–142; 1972, Tokyo, Climax Molybdenum Company (Japan) Ltd.
- A. P. Coldren, Y. E. Smith, and R. L. Cryder-man: 'Processing and properties of lowcarbon steel', 163–189; 1973, New York, American Institute of Mining, Metallurgical and Petroleum Engineers.
- M. Lafrance, F. Caron, G. Lamant, and J. Ledere: ‘Microalloying '75', 367–374; 1977, New York, Union Carbide Corporation.
- M. Civallero and C. Parrini: '16th mechanical working and steel processing', 413—436; 1974, New York, Iron and Steel Society of AIME.
- T. Yamaguchi, T. Osuka, T. Taira, and N. Iwasaki: ‘Microalloying '75', 415–424; 1977, New York, Union Carbide Corporation.
- K. D. Taeffner, G. Gorges, M. A. Haneke, and W. T. Recknagel: ‘Microalloying '75', 425— 434; 1977, New York, Union Carbide Corporation.
- M. Nishida, T. Kato, N. Ohashi, and T. Mori: Tetsu-to-Hagané, 1977, 63,1116–1125.
- A. P. Coldren and J. L. Mihelich: 'Molybdenum-containing steels for gas and oil industry applications — a state-of-the-art review', 14—28; Greenwich, Conn., Climax Molybdenum Company.
- N. Tabata, C. Shiga, A. Kamada, and T. Tanaka: Tetsu-to-Hagané, 1977, 63, S797.
- G. Tither and M. Lavite: J. Met., Sept. 1975, 27, 15–23.
- W. R. Cribb and J. M, Rigsbee: 'Structure and properties of dual-phase steels', 91—117; 1979, New York, American Institute of Mining, Metallurgical and Petroleum Engineers.
- G. R. Speich and R. L. Miller: 'Structure and properties of dual-phase steels', 145—182; 1976, New York, American Institute of Mining, Metallurgical and Petroleum Engineers.
- G. T. Eldis: ‘Structure and properties of dualphase steels', 202–220; 1976, New York, American Institute of Mining, Metallurgical and Petroleum Engineers.
- T. Tanaka, M. Nishida, K. Hashiguchi, and T. Kato: ‘Structure and properties of dual-phase steels', 221–241; 1976, New York, American Institute of Mining, Metallurgical and Petroleum Engineers.
- A. R. Marder and B. L. Bramfitt: 'Structure- and properties of dual-phase steels', 242— 259; 1976, New York, American Institute of Mining, Metallurgical and Petroleum Engineers.
- Y. Seyama, J. Yano, Y. San-nomiya, T. Sekine, and S. Suzuki: Tetsu-to-Hagané, 1979, 65, S487.
- T. Takano, M. Niikura, M. Yamada, and J. Tanaka: Tetsu-to-Hagané, 1978, 64, S326.
- T. Hatomura, C. Shiga, A. Kamada, and N. Ohashi: Tetsu-to-Hagané, 1979, 65, S485.
- K. Amano, A. Kamada, and A. Ohashi: Tetsu- to-Hagané, 1979, 65, A177–A180.
- E. Miyoshi, T. Tanaka, N. Nozaki, and M. Fukuda: ASME Publication 77-Pet-61, 1977, New York, American Society of Mechanical Engineers.