Reference
- W. Klement, R. Willens, and P. Duwez: Nature, 1960, 187, 869.
- M. Lebo and N. J. Grant: Metall. Trans., 1974, 5, 1547.
- N. J. Grant: in 'Rapidly quenched metals HI', Vol. 2, 172–182; London, The Metals Society.
- P. R. Holiday, A. R. Cox, and R. J. Patterson: in 'Rapid solidification processing principles and technologies (ed. R. Mehrabian et al.), 246; 1978, Baton Rouge, La, Claitors Publish-ing Division.
- H.H. Libermann: 'Coaxial jet melt-spinning of glassy alloy ribbons', Technical Informa-tion Series, Report 80CRD117, G.E. Corp., Schenectady, NY, June 1980.
- E. M. Breinan and B.H. Kear: in 'Rapid solidification processing principles and technologies', (ed. R. Mehrabian et al.), 87; 1978, Baton Rouge, La, Claitors Publishing Division.
- D.A. Gerdeman and N. L. Hecht: 'Arc plasma technology in materials science'; 1972, New York, Springer-Verlag.
- P. R. Dennis, C R. Smith, D. W. Gates, and J. B. Bond:'Plasma jet technology', Report SP -5033, NASA, Washington, DC, 1965.
- B. Gross, B. Grycz, and K. Miklossy: 'Plasma technology', ( English translation ed. R.0 C. G. Leckey); 1969, New York, Elsevier.
- K.D. Krishnanand and R.W. Cahn: in 'Rapidly quenched metals', (ed. N. J. Grant and B. C. Giessen), 67; 1976, Cambridge, Mass., MIT Press.
- S. Shankar, D. E. Koenig, and L. E. Dardi: J. Met., 1981, 33, (10), 13.
- M. R. Jackson, J. R. Rairden, J. S. Smith, and R. W. Smith: J. Met., 1981, 33, (11), 23.
- L.B. Loeb: in 'Handbook of Physics'/'Hand-buch der Physikr, (ed. S. Fliigge), Vol. 22 (Gas discharges II); 1956, Berlin, Springer-Verlag.
- A. M. Howatson: 'An introduction to gasdischarges'; 1965, Oxford, Pergamon.
- G. Francis: 'Ionization phenomena in gases'; 1960, London, Butterworth.
- L. M. Chanin: 'Generation and properties of non-equilibrium plasmas', Course on Funda-mentals and Applications of Plasma Chemistry, University of Minnesota, Minneapolis, Minn., 1981.
- E. pfender: 'Generation and properties of equilibrium plasmas', Course on Fundamentals and Applications of Plasma Chemistry, University of Minnesota, Minneapolis, Minn., 1981.
- J. H. Ingold: in 'Gaseous electronics', (ed. M.N. Hirsh and J, H. Oskam), Vol. 1; 1978,
- J. M. Somerville: 'The electric arc'; 1959, New York, London, Wiley.
- J.D. Cobine and E.E. Burger: J. Appl.Phys., 1955, 26, (7), 895.
- E. pfender: in 'Gaseous electronics', (ed. M.N. Hirsh and J.H. Oskam), Vol. 1; 1978, New York, Academic Press.
- G. L. Marlatte, G. L. Cann, and R. L. Harder: Aeronaut. Res. Lab. Rep., 1968, (68–0049), AD673368.
- P. Fauchais: Proc. 'Fundamental concepts', Course on Plasma Technology and ApplicaHons, 31st Canadian Chemical Engineering Congress, Montreal, Oct. 1981.
- D. M. Chen and E. pfender: IEEE Trans. Plasnza Sci., 1980, PS-8, (3), 252–259.
- A. E. Guile: IEEE Rev., 1971, 118, 1131.
- V. R. Watson and E. B. Pegot: 'Numerical calculations for the characteristics of a gas 1967.
- H. W. Drawin and P. Felenbok: 'Data for plasmas in local thermodynamic equilib-rium'; 1965, Paris, Gauthier Villars.
- J. Grey, P. F. Jacobs, and M. P. Sherman: Rev. Sci. Instrunl., 1962, 33, (7), 738.
- J. Grey: in 'Measurement in heat transfer', 2 edn; 1976, Washington, DC, Hemisphere.
- H. R. Griem: 'Plasma spectroscopy'; 1964,
- R. Weiss: Zeit. Phys 1954, 138, 170–182.
- G. L. Cann et al.: 'Thermal arc jet research', Aeronautical Systems Division, Report ASD-TDR-63-632, NASA, Washington, DC, 1963.
- C. J. Cremers, H. S. Hsia, and J. R. Mahan: IEEE Trans. Plasma Sci., PS-l, (3), 10.
- E. Muehlberger: in 'Seventh international metal spraying conference', 245; 1974,
- L. Sokol, C. McComas, and E. Hanna: US Patents 4, 256, 779, 1981; 4, 235, 943, 1980; and 4, 236, 059, 1980.
- J. A. Browning: 'Dynamics of conducting gases', 127; 1960, Chicago, Northwestern University Press.
- R. Kreienbuehl, P. Kunzmann, and K. Widmer:
- J. M. Houben and J.H. Zaat: in '8th international thermal spray conference', 78; 1976, Miami, Fla, American Welding Society.
- H. Kayser: in '8th international thermal spray conference', 123; 1976, Miami, Fla, American Welding Society.
- K. Kirmer: in '9th international thermal spray conference', (ed. A. Vardelle et al.); 1980, The Hague, Netherland Institute voor Lastechneik.
- A. Missbacher and W. Track: in '8th inter-national thermal spray conference', 25; 1976, Miami, Fla, American Welding Society.
- R. W. Smith, W. F. Schilling, and H. M. Fox: Trans. ASME A (J. Eng. Power), 1981, 103, (1), 146–153.
- H. D. Steffans, H. M. Hohle, and E. Erturk: Thin Solid Films, 1980, 73, 19.
- D. K. Gupta: Thin Solid Films, 1979, 64, 335.
- R. W. Smith: Thin Solid Films, 1981, 84, (1), 59–72.
- M. R. Jackson and J. R. Rairden: Paper pre-sented at Winter Annual Meeting of AIME, Milwaukee, Wisc., 1981.
- J. M. Houben and J.H. Zaat: in 'Seventh international metal spraying conference', 11; 1974, Cambridge, The Welding Institute.
- F. I. Kitaev and A. G. Tsidulko: Soy. Powder Metall. Met. Ceram., 1968, 66, (6), 435.
- G. V. Marr: 'Plasma spectroscopy'; 1968, New York, Elsevier.
- W. Lochte-Holtgreven (ed.): 'Plasma diag-nostics'; 1968, Amsterdam, North Holland.
- J. Grey: 'Enthalpy probes for arc plasmas — third status review', Report to Committee E - 21, ASTM, May 1968.
- J. Fiszdon and J. Lesinski: Proc. Int. Round Table on 'Study and application of transport phenomena in thermal plasmas', Odeillo, France, Sept. 1975.
- J. Fiszdon, W. Gauk, and J. Daniault: Rev. Int. Hautes Temp. Refract., 1976, 13, 11.
- C. Boffa and E. Pfender: 'Enthalpy probe and spectrometric studies in an argon plasma jet', HTL Technical Report 73, University of Minnesota, Minneapolis, Minn., 1968.
- J. A. Lewis and W. H. Gauvin: Am. Inst. Chem. Eng.J., 1973, 19, 982.
- V. F. Sivirkin and N. M. Rogachev: High Temp., 1974, 122, 110.
- R. K. Bayliss, I. G. Sayce, D. F. G. Durao, and A. Melling: Proc. 3rd Int. Symp. on 'Plasma chemistry', International Union of Pure and Applied Chemistry, Limoges, July 1977.
- A. Vardelle, M. Vardelle, J. M. Baronnet, and P. Fauchais: Proc. 4th Int. Symp. on 'Plasma chemistry', International Union of Pure and Applied Chemistry, Zurich, Aug.—Sept. 1979.
- J. Lesinski, B. Mizera-Lesinska, J. C. Fanton, and M. I. Boulos: Proc. 4th Int. Symp. on 'Plasma chemistry', International Union of Pure and Applied Chemistry, Zurich, Aug.—Sept. 1979.
- A. Vardelle, J. M. Baronnet, M. Vardelle, and P. Fauchais: IEEE Trans. Plasma Sci., 1980, PS-8, (4), 417.
- I. A. Fisher: Int. Metall. Rev. , 1972, 17, 117–129.
- M. Okada and H. Maruo: Br. Weld. J., 1968, 15, (8), 371.
- C. Borgianni et al.: Combust. Flame, 1969, 13, (2), 181.
- B. F. Scott and J. K. Cannel: Int. J. Mach. Tool Des. Res 1967, 7, (3), 243.
- B. Gal-Or: Proc. 'Joint gas turbine con-ference and exhibition', Haifa, Israel, ASME, July 1979, Paper 79-GT/Isr -8.
- J. K. Vennard: 'Elementary fluid mechanics'; 1961, Newark, Del., University of Delaware Press.
- C. E. Lapple: 'Fluid and particle mechanics'; 1951, Newark, Del., University of Delaware Press.
- R. Clift and W. H. Gauvin: Can. J. Chem. Eng., 1971, 49, 439.
- P. Fauchais: in 'Plasma spray coating', Course on Plasma Technology and Applica-tions, 31st Canadian Chemical Engineering Congress, Montreal, Oct. 1981.
- A. Vardelle, M. Vardelle, R. McPherson, and P. Fauchais: in '9th international thermal spray conference', (ed. A. Vardelle et al.), 155; 1980, The Hague, Netherland Institute voor Lastechneik.
- A. V. Petrov and A. I. Morenov: Soy. Powder Metall. Met. Ceram., 1967, 57, (9), 719.
- S. J. Grissaffe and W.A. Spitzig: 'Preliminary investigation of particle—substrate bonding of plasma-sprayed materials', Technical Note D-1705, NASA, Washington, DC, 1963.
- R. K. Rains and R. H. Kadlec: Metall. Trans., 1970, 1, (6), 1501.
- J. M. Houben: in '9th international thermal spray conference', (ed. A. Vardelle et al.), 143; 1980, The Hague, Netherland Institute voor Lastechneik.
- E. Bourdin, P. Fauchais, and M. Boulos: Proc. 'Fundamental research in heat transfer', Symposium V, 30th Canadian Chemical Engineering Conference, Edmonton, Oct. 1981.
- T. Yoshida and K. Akashi: J. Appi. Phys., 1977, 48, 2252.
- G. R. Kubanek, P. Chevalier, and W. H. Gauvin: Can. J. Chem. Eng., 1968, 46, 101.
- B. Waldie: Chem. Eng. , May 1972, 261, 188.
- W. E. Ranz and W. R. Marshall: Chem. Eng-. Frog., 1952, 48, 141-146, 173–180.
- N. N. Sayegh and W. H. Gauvin: Am. Inst. Chem. Eng. J., 1979, 25, (3), 522.
- N. N. Sayegh and W. H. Gauvin: Am. Inst. Chem. Eng. J. , 1979, 25, (6), 1057.
- G. W. Marynowski, F. A. Halden, and E. P. Farley: Electrochem. Technol., 1965, 3, (3/4), 109.
- J. L. Engelke: Paper presented at Meeting of the American Institute of Chemical Engineers, Los Angeles, Jan. 1962.
- N. L. Hecht: Am. Ceram. Soc. Bull., 1966, 45, (4), 393.
- D. R. Mash, N. E. Weare, and D. L. Walker: J. Met., 1961, 13, (7), 473.
- H. C. Carslaw and J. C. Jaeger: 'Conduction of heat in solids', 2nd edn, 233; 1959, Oxford, Oxford University Press.
- A. R. Moss and W. J. Young: Powder Metall., 1964, 7, (14), 261–289.
- Ya. Kharlamov, M. S. Hassan, and R. J. Anderson: Soy. Powder Metall. Met. Ceram., 1979, 204, (12), 888.
- H. Jones: in 'Rapid solidification processing principles and technologies', (ed. R. Mehrabian et al.), 28; 1978, Baton Rouge, La, Claitors Publishing Division.
- C. A. Williams and H. Jones: Mater. Sci. Eng., 1975, (19), 293.
- H. Jones: J. Phys.D (Appt. Phys.), 1971, 4, 1657.
- J. Madejski: J. Heat Mass Transfer, 1976, 19, 1009.
- D. R. Harbur, J. W. Anderson, and W. J. Maraman: Trans. AIME , 1969, 245, 1055.
- R. C. Ruhl: Mater. Sci. Eng., 1967, (1), 313.
- S. Safai and H. Herman: Thin Solid Films, 1977, 245, 295.
- M. Moss, D. L. Smith, and R. A. Lefever: Appi. Phys. Lett., 1964, 5, 120.
- B. C. Giessen et al.: Metall. Trans., 1977, 8A, 364.
- H. S. Ingham and A. P. Shepard: 'Flame spray handbook'; 1965, Westbury, NY, Metallizing Engineering Inc. Co.
- S. J. Grisaffe and W.A. Spitzig: 'On plasma spraying diffusion bonding between tungsten and cool stainless steel substrates', Eighth Refractory Composites Working Group Meeting, Report ML -TDR -64-233, (compiled D. R. James and L. N. Hjelm), US Air Force, Arlington Hall, Va, 1964, 767–774.
- W. A. Spitzig and S.F. Grisaffe: 'Analysis of bonding mechanism between plasma-sprayed tungsten and a stainless steel substrate', Report TN-D-2461, NASA, Washington, DC, 1964.
- F. N. Longo: Weld. J., 1966, 47, (2), 66s–69s.
- R. T. Alsop et al.: Metallurgia, 1961, 63, (4), 125.
- M. A. Matting and H.D. Steffens: Metall, 1963, 17, (6), 583.
- M. A. Matting and H.D. Steffens: Metall, 1963, 17, (9), 905.
- M. A. Matting and H.D. Steffens: Metall, 1963, 17, (12), 1212.
- S. Kitahara: J. Vac. Sci. Technol., 1974, 11, (4), 747.
- C. F. G. Baxter and H. Reiter: in '8th inter-national thermal spraying conference', 271; 1976, Miami, Fla, American Welding Society.
- X. Chen, Y. C. Lee, and E. Pfender: Proc. 6th Int. Symp. on 'Plasma chemistry', Inter-national Union of Pure and Applied Chemistry, Montreal, Que., 1983, 51.
- D. Wei, S. M. Correa, D. Apelian, and M. Paliwal: Proc. 6th Int. Symp. on 'Plasma chemistry', International Union of Pure and Applied Chemistry, Montreal, Que 1983, 83.
- G. Frind, C. P. Goody, and L. E. Prescott: Proc. 6th Int. Symp. on 'Plasma chemistry', International Union of Pure and Applied Chemistry, Montreal, Que., 1983, 110.