High temperature fatigue crack growth in Inconel 718

REFERENCES

• Pineau, A. Defect Assessment Procedures in the Creep Range. Mechanical Behaviour of Materials at High Temperature, Ed. by C.M. Branco, R. Ritchie and V. Sklenicka (eds), NATO/ASI Series, Vol.15, pp.59-82, September (1995).
   Google Scholar
• Branco, C.M. Fatigue Behaviour of Nickel Base Superalloys Under Dwell Conditions. Final Report of AGARD/SMP P94 Project, CEMULAST, Technical University of Lisbon, April (1995).
   Google Scholar
• Antunes, F.V., Ferreira, J.M., Branco, C.M. and Byrne, J. Stress intensity factor solutions for corner cracks under mode I loading. Fatigue Fracture Eng. Mater. Struct. ( in press).
   Google Scholar
• Antunes, F.V. Influence of frequency, stress ratio and stress state on fatigue crack growth in nickel base superalloys at elevated tempera-ture. PhD Thesis, Dept. Of Mechanical and Manufacturing Eng., University of Portsmouth, U.K., January (1999)
   Google Scholar
• Nicholas, T., Weerasooriya, T. and Ashbaugh, N.E. A model for creep/fatigue interactions in alloy 718. Fracture Mechanics: Sixteenth Symposium, STP 868, Philadelphia, Ed. by M.F. Canninen and A.T. Hopper, American Society for Testing and Materials, pp. 167-180 (1985).
   Google Scholar
• Lynch, S.P., Radtke, T.C., Wicks, B.J. and Byrnes, R.T. Fatigue crack growth in nickel-based superalloys at 500-700“C. II: Direct-Aged Alloy 718. Fat. Fract. Eng. Mater. Struct., 17 (3), 313-325 (1994).
   Web of Science ®Google Scholar
• Clavel, M. and Pineau, A. lntergranular fracture associated with heterogeneous deformation modes during low cycle fatigue in a Ni-base superalloy. Scripta Metall., 16, 361–364 (1982).
   Google Scholar
• Shahinian, P. and Sadananda, K. Creep-fatigue-environment interactions on crack propagation in alloy 718. Engineering Aspects of Creep, Vol. 2, Inst. Mech. Engineers, London, C239/80, pp. 1-7 (1980).
   Google Scholar
• Weerasooriya, T. Effect of frequency on fatigue crack growth rate of Inconel 718 at high temperature. Fracture Mechanics: 19th Symposium, ASTM STP 969, Ed. by T.A. Cruse, American Society for Testing and Materials, Philadelphia, pp. 907-923,1988.
   Google Scholar
• Tong, J. and Byrne, J. Effects of Frequency on Fatigue Crack Growth at Elevated Temperature. Fat. Fract. Eng. Mater. Struct. ( submitted).
   Google Scholar
• Dimopulos, V., Nikbin, K.M. and Webster, G.A. Influence of cyclic to mean load ratio on creep/fatigue crack growth. Crack Propagation Under Creep and Creep-Fatigue, ASM Materials Week, Florida, 4-9 October 1986.
   Google Scholar
• Clavel, M. and Pineau, A. Frequency and wave-form effects on the fatigue crack growth behaviour of alloy 718 at 298 K and 823 K. Metallurgical Transactions A, 9A, 471–480 (1978).
   Web of Science ®Google Scholar
• Ghonem, H. and Zheng, D. Frequency Interactions in High-Temperature Fatigue Crack Growth in Superalloys. Metall. Trans, 23A, 3067–3072 (1992).
   Web of Science ®Google Scholar
• TomIcins, B. Micromechanisms of Fatigue Crack Growth at High Stress. Met. Sci., 14 (8,9), 408–417 (1980).
   Google Scholar
• P6dron, J.P. and Pineau, A. The effect of rnicrostruture and environment on the crack growth behavior of Inconel 718 alloy at 650T under fatigue, creep and combined loading. Mater. Scie. Enginng, 56, 143–156(1982).
   Web of Science ®Google Scholar
• Ghonem, H., Nicholas, T. and Pineau, A. Elevated Temperature Fatigue Crack Growth in Alloy 718- Part I: Effects of Mechanical Variables. Fat. Fract. Eng. Materials Strum, 16 (5), 565-576 (1993).
   Web of Science ®Google Scholar
• Woollin, P., and Knott, J.F. Effects of temperature and environment on the long crack growth behaviour of Inconel 718. Proc. of 7th Int. Conference on Fracture (ICF7), University of Houston, Texas, USA, Ed. by K. Salana et al, Vol. 2, pp. 1859-1868(1989).
   Google Scholar
• Liu, H.W. Fatigue crack growth by crack tip cyclic plastic deformation: the unzipping model. Int. J. Fract., 39,63–77 (1989).
   Web of Science ®Google Scholar
• Jablonski, D.A., Carisella, J.V. and Pellowc, R.M. Fatigue crack propagation at elevated temperatures in solid solution strengthened superalloys. Metall. Trans. A, SA, 1893-1900 (1977).
   Google Scholar
• Skelton, R.P., Vilhelmsen and Webster, G.A. Energy criteria and cumulative damage during fatigue crack growth. In:. J. Fatigue, 20 (9), 641-649(1998).
   Google Scholar
• Baptista, J.M.C. An analysis of high temperature creep/fatigue behaviour of nickel based superalloy 1N718. Master Thesis, Institut° Superior Técnico, Technical University of Lisbon, October 1996 (written in Portuguese)
   Google Scholar
• Branco, C.M., Baptista, J.M.C. and Byrne, J. Crack growth under constant sustained load at elevated temperature in in718 superalloy. Mater. High Temp., 16 (1), 27-35 (1999).
   Google Scholar
• Ghonem, H. and Zheng, D. Depth of intergranular oxygen diffusion during environment-dependent fatigue crack growth in alloy 718. Mater. Sci. Enginng, A150, 151-160(1992).
   Web of Science ®Google Scholar
• Gayda, J., Gabb, T.P. and Miner, R.V. Fatigue crack propagation of nickel base superalloys at 650'C. Low Cycle Fatigue, ASTM STP 942, Philadelphia, Ed. by H.D. Solomon et al, American Society for Testing and Materials, pp. 293-309,1988.
   Google Scholar
• Byrne, J., Hall, R. and Grabowski, L. Elevated temperature fatigue crack growth under dwell conditions in waspalloy. In:. J. Fatigue, 19 (5), 359-367 (1997).
   Web of Science ®Google Scholar
• Saxena, A. A model for predicting the effect of frequency on fatigue crack growth behaviour at elevated temperature. Fat. Eng. Mater. Struct., 3,247–255 (1981).
   Web of Science ®Google Scholar
• Winstone, MR., Nikbin, K.M. and Webster, G.A. Modes of failure under creep/fatigue loading of a nickel-based superalloy. J. Mater. Sci., 20,2471–2476(1985).
   Web of Science ®Google Scholar