- Loveday, M. S. and Dyson, B. F., Creep deformation and cavitation damage in Nimonic 80A under a triaxial stress. In: ICM 3, Volume 2, Pergamon Press, pp. 213–222 (1979).
- Dyson, B. F. and Loveday, M. S. Creep fracture in Nimonic 80A under triaxial stressing. In: Creep in Structures ( Eds ARS Ponter and D R. Hayhurst), Springer-Verlag, Berlin, pp. 406–421 (1981).
- Hayhurst, D. R., Leckie, F. A. and Henderson, J. T. Design of notched bars for creep-rupture testing under tri-axial stress. Int. J. Mech. Sci., 19, 147–159 (1977).
- Hayhurst, D. R. and Henderson, J. T. Creep stress distributions in notched bars. Int. J. Mech Sci., 19 133–146 (1977).
- Hayhurst, D. R. and Webster, G. A. An overview on studies of stress state effects during creep of circumferentially notched bars. In: Techniques for Multiaxial Creep Testing ( Eds D. J. Gooch and I. M. How), Elsevier Applied Science, pp. 137–175 (1986).
- Eggeler, G. and Wiesner, C. A numerical study of parameters controlling stress redistribution in circular notched specimens during creep. J. Strain Anal., 28, 13–22 (1993).
- Crews, J. H. and Hardrath, H. F. A study of cyclic plastic stresses at a notch root. Exper. Mech., 6, 313–320 (1966).
- Neuber, H. Theory of stress concentration for shear-strained prismatical bodies with arbitrary non-linear stress–strain law. Trans. ASME, Ser. E, 28, 544–550 (1961).
- Molski, K. and Glinka, G. A method of elastic-plastic stress and strain calculation at a notch root. Mater. Sci. Eng., 50, 93–100 (1981).
- Polak, J. Stress and strain concentration factor evaluation using the equivalent energy concept. Mater. Sci. Eng., 61, 195–200 (1983).
- Ohji, K. Ogura, K. and Takii, H. Elastic-plastic analysis of notched specimens using the finite element method. 14th Japanese Cong. Materials Research, Kyoto, Japan Soc. mater. Sci., pp. 170–173 (1971).
- Mowbray, D. F. and McConnelee, J. E. Application of finite elasticplastic stress analysis to notched fatigue specimens. 1st Conf. Reactor Structural Mechanics, Berlin, Paper M6/8, pp. 425–441 (1971).
- Majima, T. Strain-concentration factor of circumferentially notched cylindrical bars under static tension. J. Strain Anal., 34, 347–360 (1999).
- Shatil, G., Ellison, E. G. and Smith, D. J. Elastic-plastic behaviour and uniaxial low cycle fatigue life of notched specimens. Fatigue Fract. Eng. Mater. Struct., 18, 235–245 (1995).
- Spindler, M. W., Hales, R. and Skelton, R. P. The multiaxial creep ductility of an ex-service type 316H stainless steel. In: Creep and Fracture in Engineering Materials and Structures ( ed. J. D. Parker), Institute of Materials, London, pp. 679–688 (2001).
- Webster, G. A., Aplin, P. F., Cane, B. J., Dyson, B. F. and Loveday, M. S. A code of practice for notched bar creep rupture testing: procedures and interpretation of data for design, National Physical laboratory (1991). Also in: Harmonisation of Testing Practice for High Temperature Materials (Eds M. S. Loveday and T. B. Gibbons), pp. 295–330, Elsevier Applied Science (1992).
- Al-Abed, B., Timmins, R., Webster, G. A. and Loveday, M. S. Validation of a code of practice for notched bar creep rupture testing: Procedures and interpretation of data for design. Mater. High Temp., 16, 143–158 (1999).
- Holt, P. J. and Spindler, M. W. A practical application of continuum damage mechanisms to plant integrity assessment. In: Symposium on Inelasticity and Damage in Solids subject to Microstructural Change. Faculty of Engineering & Applied Science, Memorial University of Newfoundland, Canada, Sept 25–27 (1996).
- Bridgman, P. W. Studies in Large Plastic Flow and Fracture, 2nd edn, Harvard (1964).
- Earl, J. C. and Brown, D. K. Distributions of stress and plastic strain in circumferentially notched tension members. Eng. Fract. Mech., 8, 599–611 (1976).
- Lubahn, J. D. and Felgar, R. P. Plasticity and Creep of Metals, Wiley, New York (1961).
- Yoshida, M., Levaillant, C. and Pineau, A. Metallographic measurement of creep intergranular damage and creep strains – influence of stress state on critical damage at failure in an austenitic steel. Proc. Int. Conf. On Creep, Tokyo, Japan, pp. 327–332 (1986).
- Contesti, E., Cailletaud, G. and Levaillant, C. Creep damage in 17–12 SPH stainless steel notched specimens: Metallographical study and numerical modelling. Trans. ASME J. Pressure Vessel Technol., 109, 228–235 (1987).
- Loveday, M. S. Practical aspects of testing circumferential notch specimens at high temperature. In: Techniques for Multiaxial Creep Testing ( Eds D. J. Gooch and I. M. How). Elsevier Applied Science, London, pp. 177–197 (1986).
- Hales, R. Fatigue testing methods at elevated temperatures. In: Fatigue at High Temperature ( Ed. R. P. Skelton), Applied Science Publishers, London, pp. 63–96 (1983).
- Walters, D. J. and Loveday, M. S. Strain measurements by contact methods and extensometry. In: Materials Metrology and Standards for Structural Performance ( eds B. F. Dyson et al.), Chapman & Hall, London, pp. 81–113 (1995).
- Kerr, D. C., Nikbin, K. M. Webster, G. A. and Walters, D. J. Creep strain determinations across the root of a notch. In: Local Strain and Temperature Measurements in Non-Uniform Fields at Elevated Temperatures ( Eds J. Ziebs et al.), Woodhead Publishing Ltd., pp. 263–273 (1999).
- ESIS P8-99D: Draft code of practice for the determination and interpretation of cyclic stress–strain data, ESIS TC11, High Temperature Mechanical Testing, November (1999).
- Skelton, R. P. Effect of strain rate on the high strain fatigue properties of a 20%Cr25%Ni/Nb stabilised stainless steel at 1025K. Mater. Sci. Eng., 11, 195–202 (1973).
- Skelton, R. P. Cyclic stress–strain properties during high strain fatigue. In: High Temperature Fatigue: Properties and Prediction ( ed. R. P. Skelton), Elsevier Applied Science, London, pp. 27–112 (1987).
- Ohno, N. and Satra, M. Detailed and simplified elasto-plastic analyses of a cyclically notched loaded bar. Trans. ASME, J. Eng. Mater. Tech., 109, 194–202 (1987).
- Skelton, R. P. Energy criterion for high temperature low cycle fatigue failure, Mater. Sci. Technol., 7, 427–439 (1991).
- Holdsworth, S. R., Holt, A. and Scholz, A. Experience with pecker capacitance gauges for the measurement of local strains at high temperatures. In: Local Strain and Temperature Measurements in Non-Uniform Fields at Elevated Temperatures ( Eds J. Ziebs et al.), Woodhead Publishing Ltd., pp. 128–137 (1999).
Cyclic stress–strain behaviour of circumferentially notched cylindrical bars at high temperature
Reprints and Corporate Permissions
Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?
To request a reprint or corporate permissions for this article, please click on the relevant link below:
Academic Permissions
Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?
Obtain permissions instantly via Rightslink by clicking on the button below:
If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.
Related research
People also read lists articles that other readers of this article have read.
Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.
Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.