Advanced search
Publication Cover
Materials at High Temperatures Volume 18, 2001 - Issue 3
Submit an article Journal homepage
203
Views
38
CrossRef citations to date
0
Altmetric
Original Articles

Evaluation of iron-aluminide CVD coatings for high temperature corrosion protection

B. A. PintMetals and Ceramics DivisionOak Ridge National Laboratory, Oak Ridge, TN37831-6156, USA
,
Y. ZhangMetals and Ceramics DivisionOak Ridge National Laboratory, Oak Ridge, TN37831-6156, USA and Center for Manufacturing Research, Tennessee Technological University, Cookeville, TN38505-0001, USA
,
P.F. TortorelliMetals and Ceramics DivisionOak Ridge National Laboratory, Oak Ridge, TN37831-6156, USA
,
J. A. HaynesMetals and Ceramics DivisionOak Ridge National Laboratory, Oak Ridge, TN37831-6156, USA
&
I. G. WrightMetals and Ceramics DivisionOak Ridge National Laboratory, Oak Ridge, TN37831-6156, USA
Pages 185-192 | Published online: 02 Jan 2014

  • G. C. Wood, I. G. Wright, T. Hodgkiess, D. P. Whittle, A Comparison of the Oxidation of Fe-Cr, Ni-Cr and Co-Cr Alloys in Oxygen and Water Vapor, Werk. Korr., 21 (1970) 900-10.
  • B. A. Pint and J. M. Rakowski, Effect of Water Vapor on the Oxidation Resistance of Stainless Steels, NACE Paper 00-259, Houston, TX, pre-sented at NACE Corrosion 2000, Orlando, FL, March 2000.
  • P. F. Tortorelli and J. H. DeVan, Behavior of Iron Aluminides in Oxidizing and Oxidizing/ Sulfidizing Environments, Mat. Sci. Eng., A153 (1992) 573-577.
  • J. H. DeVan and P. F. Tortorelli, The Oxidation-Sulfidation Behavior of Iron Alloys Containing 16-40at.% Aluminum, Corr. Sci., 35 (1993) 1065-71.
  • K. Natesan and R. N. Johnson, Corrosion Performance of Fe-Cr-Al and Fe Aluminide Alloys in Complex Gas Environments, in Heat Resistant Materials II, K Natesan, P. Ganesan and G. Lai, Eds., ASM Int.,Materials Park, OH, 1996, pp. 591-9.
  • P. F. Tortorelli and K. Natesan, Mater. Sci. Eng. A258 (1998) 115.
  • B. A. Pint, P. F. Tortorelli and I .G. Wright, Long-Term Oxidation Performance of Ingot-Produced Fe3A1 Alloys, Mater. High Temp., 16 (1999) 1-13.
  • B. Jonsson and C. Svedberg, Limiting Factors for Fe-Cr-Al and NiCr in Controlled Industrial Atmospheres, Mater. Sci. Forum, 251-4 (1997) 551-8.
  • E. J. Opila and N. S. Jacobson, Volatile Hydroxide Species of Common Protective Oxides and Their Role in High Temperature Corrosion, in Fundamental Aspects of High Temperature Corrosion, D. A. Shores, R. A. Rapp, and P. Y. Hou, Eds., Proc. Vol. 96-26, Electrochemical Society, Pennington, NJ, 1996, pp. 344-356.
  • B. A. Pint, P. F. Tortorelli, I. G. Wright, J. A. Haynes, and W. Y. Lee, Evaluation Of Iron-Aluminide Coatings For High-Temperature Corrosion Protection, paper 5.1 in Proc. Fourteenth Annual Conf. Fossil Energy Materials, R. R. Judkins (comp.), U. S. Department of Energy, 2000.
  • I. G. Wright, B. A. Pint and P. F. Tortorelli, The High Temperature Oxidation Behavior of ODS Fe3A1, Oxid. Met., 55 (2001) 333–57.
  • B. A. Pint, K. L. More, P. F. Tortorelli, W. D. Porter and I. G. Wright, Optimizing the Imperfect Oxidation Performance of Iron Aluminides, Mater. Sci. Forum, in press.
  • G.V. Samsonov, Oxide Handbook, IFI/Plenum, New York, 1973.
  • N. V. Bangaru and R. C. Krutenat, Diffusion Coatings of Steels: Formation Mechanism and Microstructure of Aluminized Heat-Resistant Stainless Steels, J. Vac. Sci. TechnoL B, 2 (1984) 806–15.
  • D. R. Baer and M. D. Merz, Differences in Oxides on Large- and Small-Grained 304 Stainless Steel, Met. Trans., 11A, 1973–80 (1980).
  • G. J. Yurek, D. Eisen and A. Garratt-Reed, Oxidation Behavior of a Fine-Grained Rapidly Solidified 18-8 Stainless Steel, Met. Trans., 13A, 473–85 (1982).
  • M. J. Maloney and G. J. Yurek, Improvements in Oxidation Resistance Through Rapid Solidification Processing, in Composites/Corrosion-Coatings of Advanced Materials, Proc. Vol. IMAM-4, S. Kimura, A. Kobayashi, S. Umekawa, K. Nü, Y. Saito and M. Yoshimura, Eds., Materials Research Society, Pittsburgh, PA, 1989, pp. 383-8.
  • J. G. Goedjen and D. A. Shores, The Effect of Alloy Grain Size on the Transient Oxidation Behavior of an Alumina-Forming Alloy, Oxid. Met., 37,125–42 (1992).
  • B. A. Pint, J. Leibowitz and J. H. DeVan, The Effect of an Oxide Dispersion on the Critical Al Content in Fe-Al Alloys, Oxid. Met., 51 (1999) 183–99.
  • J. L. Smialek, J. Doychak and D. J. Gaydosh, Oxidation Behavior of FeAl + Hf, Zr, B, Oxid. Met., 34 (1990) 259-75.
  • ASME Boiler and Pressure Vessel Code: An International Code, The American Society of Mechanical Engineers, New York, NY, 1998.
  • R. W. Swindeman, A Review of Thermal/Mechanical Fatigue in Composite Tube Materials, unpublished research, ORNL, Oak Ridge, TN, 1996.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.