References
- Armitt, J., Holmes, D. R., Manning, MT, Meadowcraft D. M. and Metcalfe, E. The spalling of steam-grown oxide from superheater and reheater tube steels. EPRI Report FP-686, February (1978).
- McCartney, L. N. Analytical models of stress transfer in unidirec-tional composites and cross-ply laminates, and their application to the prediction of matrix/transverse cracking. Proc. IUTAM Symposium on Local mechanics concepts for composite materials systems, Blacksburg, Va, 1991, 251–282.
- McCartney, L. N. Predicting transverse crack formation in cross-ply laminates. Comp. Sci. Technol., 58, 1069–1081 (1998).
- McCartney, L. N. Comparison of models for transverse ply cracks in composite laminates. Comp. Sci. Technol., 60, 2347–2359 (2000).
- McCartney, L. N. Model to predict effects of triaxial loading on ply cracking in general symmetric laminates. Comp. Sci. Technol., 60, 2255-2279 (2000). ( see Errata in Comp. Sci. Technol., 62, 1273–1274 ( 2002).
- McCartney, L. N. Predicting effect of non-uniform ply cracking on the thermoelastic properties of cross-ply laminates. Comp. Sci. Technol., 62, 1841–1856 (2002).
- McCartney, L. N. Physically based damage models for laminated composites. Part L: J. Materials: Design and Applications. Proc. Instn. Mech. Engrs., 217, 163–199 (2003).
- Evans, H. E. Spallation models and their relevance to steam-grown oxides. Paper in this issue presented at the EPRI Workshop, NPL, September 2003.
- Hsueh, C. H. and Yanaka, M. Multiple film cracking in film/sub-strate systems with residual stresses and unidirectional loading. J. Mater. Sci., 38, 1809–1817 (2003).
- Evans, H. E. Stress effects in high temperature oxidation of metals. Int. Mater. Rev., 40, 1–40 (1995).
- Roberts, S. J., McCartney, L. N. and Wright, L. Predicting steady state interface debonding in a two-layer coated system under biaxial loading and bending. NPL Report MATC(A)143, September 2003.
- Roberts, S. J. and McCartney, L. N. Predicting steady state interface debonding in a multi-layered coated system under biaxial mechani-cal and thermal loading. NPL Report MATC(A)144, September 2003.
- Osgerby, S. and McCartney, L. N. Steam oxidation of 9-12 Cr mar-tensitic steels: Characterisation and modelling the spalling of oxide scale in materials for advanced power engineering 2002. Lecomte-Beckers, J., Carton, M., Schubert, F. and Ennis, P. J. (eds) Forschungszentrum Julich GmbH, 1613-1620 (2002).
- Eberle, F. and Kitterman, J. H. Behaviour of superheater alloys in high temperature, high pressure steam. ed. G. E. Lien, A,SME, 67-113 (1968).