Measurement of flow stress in hot axisymmetric compression tests

References

• Oh, S. I., Semiatin, S. L. and Jonas, J. J. An Analysis of the Isothermal Hot Compression Test. Met. Trans. A, 23A, 963–975 (1992).
   Web of Science ®Google Scholar
• Kopp, R., HeuPen, J. M. M., Philip, E-D. and Karhausen, K. Improvement of Accuracy in Determining Flow Stress in Hot Upsetting Tests. Steel Research, 64, (8/9), 377-384 (1993).
   Google Scholar
• Kopp, R., Luce, R., Leister, B., Wolske, M., Tschirnich, M., Rehrmann, T. and Voiles, R. Flow Stress Measuring by Use of Cylindrical Compression Test and Special Application to Metal Forming Processes. Steel Research, 72, (10), 394-401 (2001).
   Google Scholar
• Evans, R. W. and Scharning, P. J. Strain Inhomogeneity in Hot Axisymmetric Compression Tests. Materials Science and Technology, 18, 1389–1399 (2002).
   Web of Science ®Google Scholar
• Roebuck, B., Lord, J. D., Brooks, M., Loveday, M. S., Sellars, C. M. and Evans, R. W. Measuring Flow Stress in Hot Axisym-metric Compression Tests. GPG3, pub: NPL, ISSN 1368-6550 (2002).
   Google Scholar
• Lacey, A. J., Loveday, M. S., Mahon, G. J., Roebuck, B., Sellars, C. M. and van der Winden, M. R. Measuring Flow Stress in Plane Strain Compression Tests. NPL Good Practice Guide No.27. April 2000. Revised summer 2002.
   Google Scholar
• Loveday, M. S., Mahon, G. J., Roebuck, B., Lacey, A. J., Pal-miere, E. J., Sellars, C. M. and van der Winden, M. R. Measure-ment of Flow Stress in Plane Strain Compression Tests. Mater at High Temp., vol 23 (2), pp 85-118 (2006).
   Web of Science ®Google Scholar
• Evans, R. W. and Scharning, P. J. Axisymmetric Compression Test and Hot Working Properties of Alloys. Materials Science and Technology, 17, 995–1004 (2001).
   Web of Science ®Google Scholar
• Dieter, G. E. Mechanical Metallurgy, SI Metric Edition, McGraw-Hill, p. 539-541 (1989).
   Google Scholar
• Roebuck, B., Orkney, L. P., Stewart, M., Varma, R. K. and Lord, J. D. Hot Axisymmetric Uniaxial Compression Tests-Prelimin-ary Studies through a UK Interlaboratory Comparison. NPL Report CMMT (A) 28, (July 1996).
   Google Scholar
• Lord, J. D. and Loveday, M. S. Tools and Lubricants for High Temperature Metalworking Laboratory-Scale Tests. NPL Mea-surement Note MN (50) (March 2001).
   Google Scholar
• Dixon, M. J. Dynamic force measurements. Chap. 4, pp. 55-80 in Materials Metrology and Standards for Structural Performance. Dyson, B. F., Loveday, M. S. and Gee, M. G. (eds.), Chapman & Hall (1995).
   Google Scholar
• Albright, J. Dynamic strain measurements. Chap. 6, pp. 114-133 in Materials Metrology and Standards for Structural Performance. Dyson, B. F., Loveday, M. S. and Gee, M. G. (eds.), Chapman & Hall (1995).
   Google Scholar
• Loveday, M. S. High Temperature Flow Stress Measurements: Quality and Traceability Issues. NPL Measurement Note CMMT(MN)062, (July 2001).
   Google Scholar
• Roebuck, B., Gee, M. G., Loveday, M. S. and Brooks, M. Load Cell Ringing in High Rate Compression Tests. NPL Measure-ment Note MATC(MN)18, (May 2002).
   Google Scholar
• Roebuck, B., Brooks, M. and Gee, M. G. Load Cell Ringing in High Rate Hot Compression Tests, International Conference on Advances in Experimental Mechanics, M. Lucas, (ed.) Trans. Tech. Pub., British Society for Strain Measurement, York, Sept. 6-8, 2004, 205-209 and Applied Mechanics and Materials, V1-2, 2004, 205-210.
   Google Scholar
• Colclough, A. R. Methods of practical thermometry in the range 0 to 3000°C — a survey. Chap. 6, pp. 58-90, in Measurement of High Temperature Mechanical Properties of Materials. Loveday, M. S., Day, M. F. and Dyson, B.E (eds.), HMSO (1982).
   Google Scholar
• Desvaux, M. P. E. The practical realisation of temperature measurement standards. Chap. 7. pp. 91-112, in Measurement of High Temperature Mechanical Properties of Materials. Loveday, M. S., Day, M. F. and Dyson, B. F. (eds.), HMSO (1982).
   Google Scholar
• Loveday, M. S., Day, M. F. and Dyson, B. F. Measurement of High Temperature Mechanical Properties of Materials. HMSO (1982).
   Google Scholar
• Bell, Stephanie. A beginners guide to uncertainty of measure-ment. NPL Good Practice Guide No. 11. ISSN 1386-6550 (1999).
   Google Scholar
• Birch, K. Estimating Uncertainties in Testing. Measurement Good Practice Guide No. 36, Pub: British Measurement & Testing Association/National Physical Laboratory, Tedding-ton, TW110LW, UK. I5BN1368-6550 (2001)
   Google Scholar
• Kandil, EA., Lord, J. D., Bullough, C. K., Georgsson, P., Legendre, L., Money, G., Mulligan, E., Fry, A. T., Gorley, T. A. E. and Lawrence, K. M. The UNCERT Manual of Codes of Practice for the Determination of Uncertainties in Mechanical Tests on Metallic Materials [CD-ROM — available from NFL] ISBN 0-0946754-41-1 (Current available on the web at http://www.npl.co.uk/npl/cmmt/projects/uncert/index.html) (2000).
   Google Scholar
• Roebuck, B. and Brooks, M. Flow Stress Measurements for Machining Modelling. NPL Report CMMT(A)123, (1998).
   Google Scholar