Measurement of flow stress in hot plane strain compression tests

References

• Sellars, C. M., Sah, J. P., Be3mon, J. H. and Foster, S. R. Report on research work supported by SRC Grant B/RG/1481, University of Sheffield, UK (1976).
   Google Scholar
• Beynon, J. and Sellars, C. M. Strain distribution patterns during plane strain compression. J Testing Evaluation, 13, 28–38. (1985).
   Web of Science ®Google Scholar
• Mirza, M. S., Sellars, C. M., Karhausen, K. and Evans, P. Multi-pass rolling of aluminium alloys: Finite element simulations and microstructure evolution. Mater Sci. Technol., 17, 874–879. (2001).
   Web of Science ®Google Scholar
• Timothy, S.R, Yiu, H. L., Fine, J. M. and Ricks, R. A. Simula-tion of single pass of hot rolling deformation of aluminium alloy by plane strain compression. Mater Sci. Technol., 7, 255–261 (1991).
   Web of Science ®Google Scholar
• Duckham, A. and Knutsen, R. D. Asymmetric flow during plane strain compression testing of aluminium alloys. Mater. Sci. Eng., A256, 220-226 (1998).
   Google Scholar
• Silk, N. J. and van der Winden, M. R. Interpretation of hot plane strain compression testing of aluminium specimens. Mater. Sci. Technol., 15, 295–300 (1999).
   Web of Science ®Google Scholar
• Lacey, A. J., Loveday, M. S., Mahon, G. J., Roebuck, B., Sellars, C. M. and van der Winden, M. R. Measuring flow stress in hot plane strain compression tests. NPL CM MT (GPG) 027 (April 2000).
   Google Scholar
• Roebuck, B., Lord, J. D., Brooks, M., Loveday, M. S., Sellars, C. M. and Evans, R. W. Measurement of flow stress in hot axisymmetric compression tests. Mater High Temp., 23 (2), pp. 59-83 (2006). (Formerly issued as Measurement Good Prac-tice Guide No 3, NPL CM MT(GPG)003 February 1997. Revised Summer 2002.)
   Google Scholar
• Roebuck, B., Loveday, M. S., Chastel, Y, Fiorucci, G. and Dal Negro, T. Measurement of flow stress at high temperature in solid torsion tests. Mater High Temp., 23 (2), 119-144 (2006). (Previously issued as Measurement Good Practice Guide No 58, NPL CM MT(GPG)058 May2003.)
   Google Scholar
• Orowan, E. Proc. Inst. Mech. Eng., 150, 140 (1943).
   Google Scholar
• Watts, A. B. and Ford, H. An experimental investigation of the yielding of strip between smooth dies. Proc. Inst. Mech. Eng., (B) 1, 448-453 (1952/3).
   Google Scholar
• Watts, A. B. and Ford, H. On the basic yield stress curve for a metal. Proc. Inst. Mech. Eng., 169, 1141–1149 (1955).
   Google Scholar
• Shi, H., McLaren, A. J., Sellars, C. M., Shahani, R. and Bolingbroke, R. Hot plate strain compression testing of aluminium alloys. J Testing Evaluation, JTEVA, 25 (1), 61-73 (1997).
   Web of Science ®Google Scholar
• Shi, H., Mclaren, A. J., Sellars, C. M., Shahani, R. and Boling-broke, R. Constitutive equations for high temperature flow stress of aluminium alloys. Mater. Sci. Technol., 13, 210–216 (1997).
   Web of Science ®Google Scholar
• Mirza, M. S. and Sellars, C. M. Modelling the hot plane strain compression test. Part 1—Effect of specimen geometry, strain rate and friction on deformation. Mater. Sci. Technol., 17, 1133–1141 (2001).
   Web of Science ®Google Scholar
• Mirza, M. S. and Sellars, C. M. Modelling of hot plane strain compression test. Part 2—Effect of friction and specimen geometry on spread. Mater. Sci. Technol., 17, 1142–1148 (2001).
   Web of Science ®Google Scholar
• Mirza, M. S. and Sellars, C. M. Modelling of hot plane strain compression test. Part 3—Effect of asymmetric conditions. Mater Sci. Technol., [Submitted for pub. Sept 2005, to be publ. 2006].
   Google Scholar
• Kowalski, B. Turtle Max. Akademia Gorniczo-Hutnicza, Mick-iewicza, 30, 30-059 Krakow, Poland (2002).
   Google Scholar
• Dieter, G. E. Mechanical Metallurgy, SI Metric Edition, McGraw-Hill, p. 18-71 (Chap. 2, stress-strain relationships) and p. 539-541 (compression tests). (1989).
   Google Scholar
• Harris, J. N. Mechanical Working of Metals: Theory and Practice. Int. Series on Mater. Sci. Technology, 36, Pergamon (1983).
   Google Scholar
• Dixon, M. J. Dynamic force measurements. In: Materials Metrology and Standards for Structural Performance, Chap. 4, pp. 55–80. Dyson, B. F., Loveday, M. S. and Gee, M. G. (eds.), Chapman & Hall (1995).
   Google Scholar
• Albright, J. Dynamic strain measurements. In: Materials Metrology and Standards for Structural Performance, Chap. 6, pp. 114–133. Dyson, B. F., Loveday, M. S. and Gee, M. G. (eds.), Chapman & Hall (1995).
   Google Scholar
• Lord, J. D. and Loveday, M. S. Tools and Lubricants for High Temperature Metalworking Laboratory-Scale Tests. NPL Mea-surement Note MATC(MN) 50 (2001).
   Google Scholar
• Loveday, M. S., Day, M. F. and Dyson, B. F. Measurement of High Temperature Mechanical Properties of Materials, HMSO (1982).
   Google Scholar
• Loveday, M. S. High Temperature Flow Stress Measurements: Quality and Traceability Issues. NPL Measurement Note MATC(MN) 62 (2001).
   Google Scholar
• Foster, S. R. Simulation of Hot Rolling of Low Carbon Steel. PhD Thesis, University of Sheffield (1981).
   Google Scholar
• Hand, R. J., Foster, S. R. and Sellars, C. M. Temperature changes during hot plane strain compression testing. Mater. Sci. Technol., 16, 442–450 (2000).
   Web of Science ®Google Scholar
• Evans, R. W. and Scharning, P. J. Systematic errors in flow stress measurement in the plane strain compression test. Mater. Sci Technol., 20, 431–440 (2004).
   Web of Science ®Google Scholar
• Lacey, A. J., Mirza, S. and Sellars, C. M. Comments on the paper ‘systematic errors in flow stress measurement for the hot plane strain compression test’. By R. W. Evans and P. J. Scharning. Mater Sci. Technol., 20, 1355 (2004).
   Web of Science ®Google Scholar
• Evans, R. W. and Scharning, P. J. Mater Sci. Technol., 20, 1356 (2004).
   Web of Science ®Google Scholar
• Roebuck, B., Gee, M. G., Loveday, M. S. and Brooks, M. Load Cell Ringing in High Rate Compression Tests. NPL Measure-ment Note MATC(MN) 18 (2002).
   Google Scholar
• Bell, S. A beginners guide to uncertainty of measurement. NPL Good Practice Guide No. 11. ISSN 1386-6550 (1999).
   Google Scholar
• Birch, K. Estimating Uncertainties in Testing—Measurement Good Practice Guide No. 36, Pub: British Measurement & Testing Association/National Physical Laboratory, Tedding-ton, TW110LW, UK. I5BN1368-6550 (2001).
   Google Scholar
• Kandil, EA., Lord, J. D., Bullough, C. K., Georgsson, P., Legendre, L., Money, G., Mulligan, E., Fry, A. T., Gorley, T. A. E. and Lawrence, K. M. The UNCERT Manual of Codes of Practice for the Determination of Uncertainties in Mechanical Tests on Metallic Materials [CD-ROM,— available from NFL] ISBN 0-0946754-41-1 (Currently available on the web at: http://www.npl.co.uldnpl/cmmt/projects/uncert/index.html) (2000).
   Google Scholar
• Colclough, A. R. Methods of practical thermometry in the range 0 to 3000°C—a survey. In: Measurement of High Temperature Mechanical Properties of Materials, Chap. 6, pp. 58–90, Loveday, M. S., Day, M. F. and Dyson, B. F. (eds.), HMSO (1982).
   Google Scholar
• Desvaux, M. P. E. The practical realisation of temperature measurement standards. In: Measurement of High Temperature Mechanical Properties of Materials, Chap. 7. pp. 91–112, Loveday, M. S., Day, M.E and Dyson, B. F. (eds.), HMSO (1982).
   Google Scholar
• Osgerby, S. and Loveday, M. S. (1992). Creep Laboratory Manual, NPL Report DMM(A)37, and revised in Summer 2002.
   Google Scholar
• Choi Yongjun. Effect of Initial Grain Size on Static Recrys-tallisation during Hot Working of Stainless Steel. M. Phil. Thesis, University of Sheffield (1999).
   Google Scholar
• Colas-Ortiz, R. High Strain Rate, High Temperature Deforma-tion of Stainless Steel. PhD Thesis, University of Sheffield (1983).
   Google Scholar
• Hill, R. The Mathematical Theory of Plasticity, Clarendon Press, Oxford (1950).
   Google Scholar
• Rowe, G. W. An Introduction to the Principles of Metalwork-ing. Edward Arnold, London (1965).
   Google Scholar
• Orowan, E. and Pascoe, KJ. Iron & Steel Inst. Special Report, No. 34, 124 (1946).
   Google Scholar
• Davenport, S. B., Silk, N. J., Sparks, C. N. and Sellars, C. M. Development of constitutive equations for modelling of hot rolling. Mater. Sci. Technol., 16, 539–546 (2000).
   Web of Science ®Google Scholar
• Kowalski, B., Lacey, A. J. and Sellars, C. M. Correction of plane strain compression data for the effects of inhomoge-neous deformation. Mater Sci. Technol., 19, 1564–1570 (2003).
   Web of Science ®Google Scholar