References
- F. L. JAGGER and W. J. C. PRICE: in Proc. 3rd European Powder Metallurgy Symposium (Powder Metall., Conf. Suppl.), 1971, Part 1, 407-424.
- F. L. JAGGER, P. I. WALKER, and W. J. C. PRICE: in Proc. 5th Int. Conf. on ‘Powder metallurgy’, Oct. 1978, Gottwaldov, Czechoslovakia, Czechoslovak Academy of Science, Vol. 2, 257-272.
- E. A. DICKINSON and P. I. WALKER: Met. Powder Rep., 1980, 35, 18–20.
- A. B. SMITH and N. C. WHITTLE: in Proc. 25th Int. Machine Tool Design and Research Conf., (ed. S. A. Tobias), 261; 1985, London, Macmillan.
- J. C. CLARK: in Proc. 21st Joint Propulsion Conference, July 1985, Monterey, Cal., AIAA/SAE/ASME/ASEE, p. 1-7.
- J. A. RESCALVO and B. L. AVERBACH: Metall. Trans., 1979, 10A, 1265–1271.
- B. L. AVERBACH, B. LOU, P. K. PEARSON, R. E. FAIRCHILD, AND E. N. HAMBURGER: Metall. Trans., 1985, 16A, 1253–1271.
- P. F. BROWN, Jr, G. A. BOGARDUS, R. D. DAYTON, and D. S. sctruLze: in ‘Rolling contact fatigue testing of bearing steels’, STP 771, (ed. J. J. C. Hoo), 323-341; 1982, Philadelphia, Pa, American Society for Testing and Materials.
- E. N. BAMBURGER: in ‘Tribology in the ‘80s’, 773-793; 1983, Washington, DC, NASA.
- A. S. WRONSKI, L. B. HUSSAIN AL-YASIRI, and F. L. JAGGER: Powder Metall. , 1979, 22, 109–118.
- K. ERIKSSON: Scand. J. Metall., 1975, 4, 182–184.
- P. W. SHELTON and A. S. WRONSKI: in ‘Towards improved performance of tool materials’, (ed. R. S. Irani et al.), 176-182; 1982, London, The Metals Society.
- P. W. SHELTON: PhD thesis, University of Bradford, 1985.
- P. W. SHELTON and A. S. WRONSKI: Met. Sci., 1983, 17, 533–539.
- F. T. sisco: ‘The alloys of iron and carbon’, Vol. 2, 1937, New York, McGraw Hill.
- A. NADAI: ‘Theory of flow and fracture of solids’, Vol. 1, 2 edn, 363-366; 1950, New York, McGraw-Hill.
- G. R. IRWIN: J. Appl. Mech., 1962, 29, 651–654.
- A. R. JOHNSON: Metall. Trans., 1977, 8A, 891–897.
- T. HOSHIDE, H. FURUYA, Y. NAGASE, and T. YAMADA: Int. J. Fract., 1984, 26, 229–239.
- T. OKADA and G. SINES: J. Am. Ceram. Soc., 1983, 66, 719–725.
- R. O. RITCHIE: J. Eng. Mater. Technol. (Trans. ASME), 1983, 105, 1–7.
- K. J. MILLER: Fatigue Eng. Mater. Struct., 1982, 5, 223–232.
- M. E. FINE and R. O. RITCHIE: in ‘Fatigue and microstructure’, 245-278; 1979, Metals Park, Ohio, American Society for Metals.
- D. A. CURRY and J. F. KNOTT: Met. Sci., 1979, 13, 341–345.
- D. J. GREEN, P. S. NICHOLSON, and J. D. EMBURY: J. Am. Ceram. Soc., 1973, 56, 619–623.
- F. M. BEREMIN: Metall. Trans., 1983, 14A, 2277–2287.
- A. WRONSKI and A. PINEAU: submitted to Int. J. Fract.
- P. BEISS, R. WAHLING, and D. DUDA: in ‘Modern developments in powder metallurgy’, Vol. 17, 331-357; 1985, Princeton, NJ, Metal Powder Industries Federation.
- R. W. RICE: in Tractography of ceramic and metal failures', (ed. J. J. Mecholsky and S. R. Powell, Jr), 5-103; 1984, Philadelphia, Pa, American Society for Testing and Materials.
- M. JEANDIN, C. AUBIN, and Y. BIENVENU: Met. Powder Rep., 1982, 37, 187–190.
- M. M. OLIVEIRA, I. M. MARTINS, R. M. MESQUITA, M. B. MARQUES, and II. CARVALHINHOS: in ‘Horizons of powder metallurgy’, (ed. W. A. Kaysser and W. J. Huppmann), 233-235; 1986, Freiburg, Verlag Schmid.