References
- V. LUPINC and T. B. GIBBONS: ‘High temperature alloys for gas turbines’, (ed. D. Coutsouradis et al.), 335; 1978 Liege, Applied Science.
- R. F. SMART: Metallurgia Met. Forming, 1977, 44, 286.
- E. BACHELET and J. C. LESOULT: ‘High temperature alloys for gas turbines’, (ed. D. Coutsouradis et al.) 665; 1978, Liege, Applied Science.
- S. W. K. SHAW: ‘Superalloys 1980' (ed. J. K. Tien et al.), 275; 1980, Metals Park, Ohio, American Society for Metals.
- K. R. WILLIAMS and B. WILSHIRE: Met. Sci. J., 1973, 7, 176.
- J. D. PARKER and B. WILSHIRE: Met. Sci., 1975, 9, 248.
- M. McLEAN: Proc. R. Soc. (London), 1980, 371A, 279.
- P. J. HENDERSON and M. McLEAN: Acta Metall. , 1983, 8, 1203.
- D. McLEAN: Met. Sci., 1984, 18, 249.
- K. M. DELARGY, S. W. K. SHAW, and G. D. W. SMITH: Mater. Sci. Technol., 1986, 2, 1031–1037.
- R. RAJ and A. K. GHOSH: Metall. Trans., 1981, 12A, 1291.
- B. F. DYSON: Can. Metall. Q., 1979, 18, 31.
- B. F. DYSON and m. S. LOVEDAY in Proc. Int. Conf. on ‘Engineering aspects of creep’, Sheffield, 1980, The Institute of Mechanical Engineers.
- T. B. GIBBONS and B. E. HOPKINS: Met. Sci., 1984, 18, 273.
- H. R. TIPLER and M. S. PECK: ‘An investigation of the creep fracture process in a cast Ni—Cr-base alloy IN-738LC’, Final Report, COST 50 Project DMA(A)33, 1981.
- A. K. KOUL and R. THAMBURAJ: Metall. Trans., 1985, 16A, 17.
- L. M. BROWN and R. K. HAM: in ‘Strengthening methods in crystals’, (ed. A. Kelley and R. B. Nicholson), 1971, Amsterdam, Elsevier.
- H. GLEITER and E. HORNBOGEN: Phys. Status Solidi, 1965, 12, 235.
- S. BASSO and V. LUPINC: ‘Strength of metals and alloys’, Vol. 1, (ed. H. J. McQueen et al.), 719; 1985, Oxford, Pergamon Press.