References
- H. C. EATON and H. NORDEN: in ‘Failure mechanisms in high performance materials’, (ed. J. G. Early et al), 109; 1984, New York, Cambridge University Press.
- J. W. PUGH: in ‘High temperature materials’, (ed. R. F. Hehemann and G. M. Ault), 306; 1957, New York, John Wiley & Sons Inc.
- J. M. WALSH and M. J. DONACHIE, JR: Metall. Trans. A, 1985, 16, 605.
- K. E. POULSEN, S. RUBAK, and E. W. LANGER: Scr. Metall., 1974, 8, 1297.
- T. MONTELBANO and J. BRETT: Trans. AIME, 1968, 242, 2121.
- S. FRIEDMAN and J. BRETT: Trans. AIME, 1968, 242, 2121.
- T. G. NIEH: Scr. Metall., 1984, 18, 1279.
- A. JOSHI and D. F. STEIN: Metall. Trans. A, 1970, 1, 2453.
- Y. LENG, T. H. COURTNEY, and J. C. M. KAMPE: Mater. Sci. Eng., 1987, 94, 209.
- G. P. YIASEMIDS: Proc. Int. Conf. on ‘Diffusion bonding’, (ed. R. Pearce, 259; 1987, Bedfordshire, Cranfield Institute of Technology.
- J. PILLING: Mater. Sci. Eng., 1988, 100, 137.
- D. V. DUNFORD and P. G. PARTRIDGE: Proc. Int. Conf. on ‘Diffusion bonding’, (ed. R. Pearce, 17; 1987, Bedfordshire, Cranfield Institute of Technology.
- RICHARD W. HERTZBERG: ‘Deformation and fracture mechanics of engineering materials’, 2 edn, 239; 1983, New York, John Wiley & Sons.
- A. P. VON ROSENSTIEL, P. SCHWAAB, and J. D. BROWN: ‘Progress in materials analysis’, (ed. M. Grasserbauer and M. K. Zacherl), Vol. 1, 199; 1983. New York/Vienna, Springer-Verlag.
- W. G. MOFFATT: ‘Handbook of binary phase diagrams’, Vol. 4; 1984, New York, Genium Publishing Corporation.
- M. L. FIEDLER and H. H. STADELMAIER: Z. Metallkund., 1975, 66, 402.
- E. EPREMIAN and D. HARKER: J. Met., 1949, 1, 267.
- H. R. JANSEN: High Temp. — High Press., 1986, 18, 173.
- B. C. MUDDLE: Metall. Trans. A, 1984, 15, 1089.
- J. B. POSTHILL and D. V. EDMONDS: Metall. Trans. A, 1986, 17, 1921.
- B. C. MUDDLE and D. V. EDMONDS: Acta Metall., 1985, 33, 2119.