References
- R. L. BICKERDIICE, D. CLARK, G. HUGHES, M. C. McCONNELL, W. N. MAIR, P. G. PARTRIDGE, and B. W. VINEY: ‘Preparation and properties of evaporated alloys deposited on a reciprocating collector’, Technical Report 85034, Royal Aerospace Establish-ment, Farnborough, 1985.
- R. L. BICKERDIKE, D. CLARK, J. N. EASTABROOK, G. HUGHES, W. N. MAIR, P. G. PARTRIDGE, and H. C. RANSON: Int. J. Rapid Solidification, 1986, 2, 1–19.
- R. W. GARDINER and M. C. McCONNELL: Met. Mater., 1987, 3, 254–258.
- M. C. McCONNELL, D. CLARK, and C. J. GILMORE: ‘The rolling of evaporated Al—Cr—Fe alloys’, Technical Report 83074, Royal Aerospace Establishment, Farnborough, 1983.
- P. G. PARTRIDGE and D. CLARK: ‘The effect of upsetting and extrusion on the tensile properties and toughness of an evaporated Al—Cr—Fe alloy’, Technical Memorandum MAT/246, Royal Aerospace Establishment, Farnborough, 1976.
- M. C. McCONNELL and P. G. PARTRIDGE: Acta Metall., 1987, 35, 1973–1980.
- M. C. McCONNELL: Unpublished work, Royal Aerospace Estab-lishment, Farnborough, 1982.
- B. A. SHOLLOCK: ‘Precipitation in rapidly solidified aluminium—chromium—iron alloys’, PhD thesis, University of Oxford, 1989.
- P. G. PARTRIDGE and M. C. McCONNELL: Acta Metall., 1987, 35, 1981–1993.
- J. J. DUNKLEY and R. J. CAUSTON: Powder Metall. Int., 1976, 8, 115–117.
- I. E SAKATA: ‘System study of transport aircraft incorporating advanced aluminium alloys (Final Report)’, Report NASA-CR-165820, NASA, Burbank, CA, 1982.
- G. J. PETRAK and M. A. MALUS: ‘The mechanical property database fora cooperative program on first generation PM aluminium alloys (Final Report)’, Report AFWAL-TR-85-4052, Air Force Wright Aeronautical Laboratory, Dayton, OH, 1985.
- F. H. FADES and J. R. PICKENS: J. Met., 1984, 36, (1), 14–28.
- E H. FROES, Y.-W. KIM, and F. HEHMANN: J. Met., 1987, 39, (8), 14–21.
- ‘High temperature aluminium alloys’, Data sheets, Allied-Signal Inc., Morristown, NJ, 1988.
- P. D. CASSIDY: The room and elevated temperature tensile properties and microstructure of high temperature aluminium alloys FVS0812 and FVS1212', Technical Memorandum MAT/ STR 1135, Royal Aerospace Establishment, Farnborough, 1989.
- I. G. PALMER and M. P. THOMAS: Metall, 1987, 41, 600–605.
- W. S. MILLER, I. R. HUGHES, I. G. PALMER, M. P. THOMAS, T. S. SAINI, and J. WHITE: M‘High strength powder metallurgy aluminium alloys II’; (ed. G. J. Hildeman and M. J. Koczak), 311-331; 1986, Warrendale, PA, TMS Publications.
- S. L. LANGENBECK, W. M. GRIFFITH, G. J. HILDEMAN, and J. W. sintox: ‘Rapidly solidified powder aluminium alloys’, STP 890, 410-422; 1986, Philadelphia, PA, ASTM.
- G. LUTJERING, H. DölCER, and D. MUNZ: in ‘The microstructure and design of alloys’ (Proc. 3rd Int. Conf. on ‘Strength of metals and alloys’), 1, 427-431; 1973, London, The Institute of Metals.