References
- A. KRAUTWALD: Doctoral dissertation, RWTH Aachen,1986.
- B. C. OBERLÄNDER: in ‘Oberflächenveredelung mit tantal-bzo. niobhaltigen Nickelhartlegierungun am Laserstrahl', Schweisstechn. Forschungsberichte, Bd. 45; 1992, Diissel-dorf, Deutscher Verlag für Schiveil3technik DVS (Doctoral dissertation, RWTH Aachen, 1991).
- E. LUGSCHEIDER, B. C. OBERLÄNDER, and H. MEINHARDT: in Proc. ‘ECLAT 3’, (ed. H. W. Bermann and R. Kupfer, 555; 1990, Coburg, Germany, Sprechsaal Publishing.
- E. LUGSCHEIDER and B. C. OBERLÄNDER: in Proc. ‘Surface modification technologies 4’, (ed. T. S. Sudarshan et al.), 923-930; 1991, Warrendale, PA, TMS.
- L. LI, W. M. STEEN, and R. D. HIBBERD: in Proc ‘ECLAT 3’, (ed. H. W. Bergmann and R. Kupfer, 355-369; 1990, Coburg, Germany, Sprechsaal Publishing.
- R. BECKER and G. SEPOLD: Metalloberfläche, 1990, 44, (1), 25–28.
- H. MARCHANDISE: in ‘Plasmatechnologie — Grundlagen und Anwendungen', Bd.8; 1970, Düsseldorf, Deutscher Verlag ttir SchweiBtechnik DVS.
- H. DöREN and K. WERNICKE: in ‘EinfluB der SchweiBparameter beim PlasmaauftragschweiBen mit Pulver', DVS-Berichte, Bd. 100, S.72-77; Düsseldorf, Deutscher Verlag für SchweiBtechnik DVS.
- E. BENsTEL: in ‘PlasmaauftragschweiBen, Stand und Entwick-lung des Verfahrens', Plasmaverfahren zum Verbinden und Auftragen metallischer Werkstoffe 197; 1969, Essen, Haus der Technik.
- W. IRMER and X. HENTSCHEL: Schweisstechnik, 1969, 5, and x. HENTSCHEL: Schweisstechnik, 1969, 5, 193–197.
- F. EICHHORN and J. METZLER: in ‘EinfluB verscheidener SchweiB-parameter auf die Lichtbogencharakteristik und das SchweiBer-gebnis beim PlasmapulverauftragschweiBen', Plasmaverfahren zum Verbinden und Auftragen metallischer Werkstoffe 197; 1969, Essen, Haus der Technik.
- F. EICHHORN and F. WALTER: Schweissen Schneiden, 1967, 19, H12, 570–575.
- H. HERMANN: Spektrum Wissenschaft, Nov. 1988, 102-109.
- D. JÄGER: Doctoral dissertation, RWTH Aachen, 1989.
- D. APELIAN, M. PALIWAL, R. W. SMITH, and W. F. SCHILLING: Int. Met. Rev., 1983, 28, (5), 271–294.
- E. LUGSCHEIDER and Th. WEBER: Z. Elektrowiirme Int., 1987, B3/4, 190–195.
- N. N.: DIN 4768.
- H. DRZENIEK, S. CRESON, and E. LUGSCHEIDER: in ‘Neue vollautomatische Anlage zur Prüfung von StrahlverschleiB', DVS-Tagung, Werkstoffprüfung 1986, Bad Nauheim, Deutscher Verlag für SchweiBtechnik DVS.
- E. DEPPE DRZENIEK and E. LUGSCHEIDER: in ‘Metall-Mineral-Korn-GleitverschleiB-Prilfanlage’, DVS-Tagung, Werkstoffprii-fung 1986, Bad Nauheim, Deutscher Verlag für SchweiBtechnik DVS.
- J. W. NACKEN: Doctoral dissertation, RWTH Aachen, 1988.
- N. N.: DIN 50 332, Entwurf Mai 1984, StrahlverschleiB-prüfung.
- N. JONES: in ‘Rapid solidification processing — principles and technologies’; (ed. R. Mehrabian et al.); 28; 1978, Baton Rouge, Claitors.
- H. JONES: in ‘Treatise on materials science and technology’, Vol. 20; 1988, London, Academic Press.
- B. L. MORDIKE, H. W. BERGMANN, and N. GROSS: Zt. Werkstofftechnik, 1983, 14, 253–257.
- D. G. McCARTHY and J. D. HUNT: Metall. Trans., June 1984, 15A, 983–994.