REFERENCES
- V. TVERGAARD: Adv. Appl. Mech., 1989, 27, 83–149.
- R. B. CLOUGH, R. PATEL, J. S. HWANG, and G. K. LUCEY, Jr: ill Proc. National Electronic Packaging and Production Conf. (NEPCON), Vol. 3,1256–1265; 1992, Anaheim, CA, NEPCON.
- S. R. LOW HI, R. J. FIELDS, and G. K. LUCEY, Jr: in Proc. 41st Electronic Components and Technology Conf., IEEE Publication no. 91CH2889-2, 292–298; 1991, New York, Institute of Electrical and Electronics Engineers.
- J. L. MARSHALL, J. CALDERON, D. MILLER, M. DESIMONE, and J. SEES: in Proc. 41st Electronic Components and Technology Conf., IEEE Publication no. 91CH2889-2, 647–652; 1991, New York, Institute of Electrical and Electronics Engineers.
- R. B. CLOUGH and R. J. SCHAEFER: Mater. Sci. Technol., 1993, 9, (4), 328–335.
- S. B. BROWN and G.A. WEBER: Mod. Dev. Powder Metall., 1988, 18–21, 465–476.
- S. SHEYIA and M. OYANE: Int. J. Mech. Sci., 1976, 18, 285–291.
- W. J. HUPPMANN and M. HIRSCHVOGEL: Int. Met. Rev., 1978, 23, (5), 209–239.
- B. MASSEY: 'Mechanics of fluids', 5 edn, 176; 1983, Wokingham, Berks., Van Nostrand Reinhold.
- In 'Metals handbook', 9 edn, Vol. 2, 620; 1979, Metals Park, OH, ASM.
- S. VAYNMAN, as. E. FINE, and D. A. JEANNOTTE: in 'Solder mechanics: a state of the art assessment', (ed. D. Frear et al.), 155–189; 1991, Warrendale, PA, The Minerals, Metals and Materials Society.
- In 'Metals handbook', 9 edn, Vol. 9, p. 457, Fig. 45; 1985, Metals Park, OH, ASM.
- B. WONG, D. E. HELLING, and R. W. CLARK: IEEE Trans. Components Hybrids Manuf. Technol., 1988, 11, 284–290.
- J. FISCHER, L. LUSK, D. HINKLEY, M. DOWD, G. BOSICE, and M. norr: 'Reliability assessment of antimony removal from tin—lead solders', Report no. NWC TP-7163, Naval Weapons Center, China Lake, CA, 1992, 219–236.
- A. S. HELLE, K. E. EASTERLING, and M. F. ASHBY: Acta Metall., 1985, 33, 2163–2174.
- G. P. TANDON and G. J. WENG: J. Appl. Mech., 1988, 55, 126–135.
- S. M. DORAIVELU, H. L. GEGEL, J. S. GUNASEKERICERA, J. C. MALAS, J. T. MORGAN, and J. F. THOMAS, Jr: Int. J. Mech. Sci., 1984, 26, 527–535.
- A. L. GURSON: J. Eng. Mater. Technol., 1977, 99, 2–15.
- A. C. F. COCKS: J. Mech. Phys. Solids, 1989, 37, 693–715.