References
- T. W. CLYNE and P. J. WITHERS: ‘An introduction to metal matrix composites’; 1993, Cambridge, Cambridge University Press.
- D. J. LLOYD: Int. Mater. Rev., 1994, 39, (1), 1–23.
- D. L. McDANELS: Metall. Trans., 1985, 16A, 1105–1115.
- D. J. LLOYD: in Proc. 12th Rises Int. Symp. on Metallurgy and Materials Science ‘Metal matrix composites — processing, microstructure and properties’, (ed. N. Hansen et al.), 81-99; 1991, Roskilde, Denmark, Riso National Laboratory.
- S.-Y. OH, J. A. CORNIE, and K. C. RUSSELL: Metall. Trans., 1989, 20A, 533–541.
- T. OKAMOTO: ISIJ Int. , 1990, 30, 1033–1040.
- R. J. ARSENAULT and N. au: Mater. Sci. Eng., 1986, 81, 175–187.
- I. DUTTA, S. M. ALLEN, and J. L. HAFLEY: Metall. Trans., 1991, 22A, 2553–2563.
- T. DAS, P. R. MUNROE, and S. BANDYOPADHYAY: J. Mater. Sci., 1996, 31, 5351–5361.
- E. SODERLUND, I. REINECK, and D. L ROWCLIFF: J. Mater. Res., 1994, 9, 1683–1692.
- J. M. OLAF and C. SCHEER: Comput. Mater. Sci., 1993, 1, 273–282.
- H. F. WANG, J. C. NELSON, W. W. GERBERICH, and H. E. DEVE: Acta Metall. Mater., 1994, 42, 695–700.
- J. W. LEGGOE, X. Z. HU, M. V. SWAIN, and M. B. BUSH: SCY. Metall. Mater., 1994, 34, 577–582.
- M. J. COUPER and R. XIA: in Proc. 12th Riso Int. Symp. on Metallurgy and Materials Science ‘Metal matrix composites — processing, microstructure and properties’, (ed. N. Hansen et al.), 291-298; 1991, Roskilde, Denmark, Riso National Laboratory.
- M. J. COUPER, N. SETARGEW, A. H. A. CLAYTON, R. TARR, and S. BANDYOPADHYAY: in Proc. Conf. ‘Materials united in the service of man’, Perth, Australia, September 1990, Institute of Metals and Materials Australasia/ Welding Technology Institute Australia, pp. 1-10.
- UMIS 2000 Operating Manual; 1993, Linfield, Australia, Division of Applied Physics, CSIRO.
- N. SAVVIDES and T. J. BELL: J. Appl. Phys., 1992, 72, (7), 2791–2796.
- J. L. LOUBET, J. M. GEORGES, O. MARCHESINI, and G. MEILLE: J. Tribology, 1984, 106, 43–48.
- J. L. LOUBET, J. M. GEORGES, and G. MEILLE: in Nicroindentation techniques in materials science and engineering', (ed. P. J. Blau and B. R. Lawn), STP 889, 72-89; 1986, Philadelphia, PA, ASTM.
- J. P. UNSWORTH and S. BANDYOPADHYAY: J. Mater. Sci., 1994, 29, 4645–4651.
- P. APPENDINO, C. BADINI, E MARINO, and A. TOMASI: Mater. Sci. Eng., 1991, A135, 275-279.
- E. P. HUNT, P. J. GREGSON, P. D. PITCHER, and C. J. PEEL: Scr. Metall, Mater., 1991, 25, 2769–2774.
- M. B. HOUSE, K. C. MEINERT, and R. B. BHAGAT: J. Met., 1991, 43, (8), 24–28.
- I. A. IBRAHIM, F. A. MOHAMED, and E. J. LA VERNIA: J. Mater. Sci., 1991, 26, 1137–1156.
- C. G. LEVI, G. J. ABBASCHIAN, and R. MEHRABIAN: Metall. Trans., 1978, 9A, 697–711.
- J. HomENy and M. M. BUCKLEY: Mater. Lett., 1991, 10, 421–424.
- N. WANG, Z. WANG, and G. C. WEATHERLY: Metall. Trans., 1992, 23A, 1423–1429.
- M. J. HADIANFARD, y W. MAI, and J. c. HEALEY: J. Mater. Sci., 1993, 28, 3665–3671.
- NI. J. HADIANFARD, Y. W. MAT, and J. C. HEALEY: J. Mater. Sci., 1994, 29, 3906–3912.